saravanan karunanaithi

024 - Present
Principal
shikshaa institute of advanced technologies,chengalpattu

2017 - 2023
Principal
Sri Venkateswara Institute of Science and Technology,Thiruvallur

2007 - 2017
Associate Professor
Sri Ram Engineering College,Thiruvallur

2004 - 2007
Assistant Professor
Bhajarang Engineering College,Thiruvallur

2000 - 2004
Assistant Professor
st peter engineering and technology ,Thiruvallur

EDUCATION

2017
Ph.D
Prist University

2006
ME
Anna University

2000
BE
Maharaja Engineering College

1995
DME
Thiru Ramakrishna nallammai polytechnic

RESEARCH, TEACHING, or OTHER INTERESTS

Mechanical Engineering, Materials Science, Metals and Alloys, Mechanics of Materials

FUTURE PROJECTS

Scopus Publications

Effect of temperature on silane surface treated pet core, tanned leather and waste glass fibre-reinforced composites on load bearing and tribological properties
K. Saravanan, S. Sambath, S. Ravi, and V. Jayaseelan
Springer Science and Business Media LLC



Optimization of heat-treated silicon nitride additive parameters on flawless casting of AA7075 alloys: an alternative for conventional green sand
N. E. Edwin Paul, D. Jayabalakrishnan, V. Jayaseelan, and K Saravanan
Springer Science and Business Media LLC



Thermally reduced sugarcane bagasse carbon quantum dots and in-plane flax fiber unsaturated polyester composites: surface conductivity and mechanical properties
K. Saravanan, D. Jayabalakrishnan, K. Bhaskar, and S. Madhu
Springer Science and Business Media LLC



MICROSTRUCTURAL ANALYSIS OF AN AZ31 ALLOY PLATE PROCESSED WITH ECAP AND ELECTRO PULSING TREATMENT
K. SARAVANAN, D. JAYA BALAKRISHNAN, R. RAJ JAWAHAR, and S. N. SARANYA
World Scientific Pub Co Pte Ltd
The electro-pulsing treatment (EPT) method enhanced material properties, such as recrystallization, structure, microstructural recrystallization, and grain refinement. The EPT precipitation behavior of the [Formula: see text]-Mg[Formula: see text]Al[Formula: see text] Phase in the AZ31 composite was inspected using SEM and EBSD patterns. The experimental outcomes indicate that the EPT process efficiently achieved a spherical Mg[Formula: see text]Al[Formula: see text]phase (nearly 310 nm) and a regular UFG structure (almost 890[Formula: see text]nm). AZ31 alloys with strengthened texture after EPT for 40[Formula: see text][Formula: see text]m for 3[Formula: see text]min. Structural characteristics, recrystallization, and microstructure grain enhancement can be achieved through performing EPT at the lowest temperature over a short period of time.


Silane Grafted Nanosilica and Aramid Fibre-Reinforced Epoxy Composite: DMA, Fatigue and Dynamic Loading Behaviour
S. Ravi, K. Saravanan, D. Jayabalakrishnan, P. Prabhu, Vijayananth Suyamburajan, V. Jayaseelan, and A. V. Mayakkannan
Springer Science and Business Media LLC



Optimization of SiC Abrasive Parameters on Machining of Ti-6Al-4V Alloy in AJM Using Taguchi-Grey Relational Method
Saravanan K, Francis Xavier J, Sudeshkumar M.P, T. Maridurai, Vijayananth Suyamburajan, and V. Jayaseelan
Springer Science and Business Media LLC



Fabrication and Characterization of Acrylonitrile Butadiene Rubber and Stitched E-Glass Fibre Tailored Nano-Silica Epoxy Resin Composite
D. Jayabalakrishnan, K. Saravanan, S. Ravi, P. Prabhu, T. Maridurai, and V. R. Arun Prakash
Springer Science and Business Media LLC



Investigation of optimal wear rate for Al-TiC alloy using taguchi's approach
P. Sathivel, S. Santhosh, C. Saravanan, and K. Saravanan
Elsevier BV



Investigation and evaluation of mechanical behaviour of Al-TiC alloy
Saravanan C., Saravanan K., Sathish Kumar G., Sevvel P., and Sudharsan P.
Elsevier BV



Evaluation of the flexural properties of pineapple reinforced polymer composite for automotive and electrical applications
B. Vijaya Ramnath, C. Vinodh Krishna, S. Karthik, K. Saravanan, V.M. Manickavasagam, and C. Elanchezhian
Trans Tech Publications, Ltd.
The interest in natural fibers has been rising in the past decade due to low cost and abundant availability. Though the composites made from artificial fibers possess superior properties when compared to natural fiber reinforced composites, their high cost makes it unviable in day-to-day applications. This paper is an evaluation of a pineapple fiber reinforced composite using epoxy resin as matrix. Glass fibers are provided as the outer layers to improve the surface finish and strength. Using hand lay-up method, fibers of pineapple are assembled in alternate layers of vertical and horizontal orientation. The flexural properties of the composite are determined. Three samples are tested and it is seen that there is no appreciable variation in the properties. The average break load is 1.29 KN and the deflection is 5.533 mm. The flexural strength is calculated as 78.63MPa.


Determination of mechanical properties of intra-layer abaca-jute-glass fiber reinforced composite
B. Vijaya Ramnath, V.M. Manickavasagam, C. Elanchezhian, C. Vinodh Krishna, S. Karthik, and K. Saravanan
Elsevier BV

RECENT SCHOLAR PUBLICATIONS

Publications

Scopus Id
57226266118

GRANT DETAILS

modrop from AICTE Rs 3,50,000
National conference from AICTE Rs 1,50,000

RESEARCH OUTPUTS (PATENTS, SOFTWARE, PUBLICATIONS, PRODUCTS)

A NEW APPROACH TO ELIMINATING CARBON PARTICLES FROM DIESEL EXHAUST


Patent No. 2021104286 Granted

CONSULTANCY

to be applied

Industry, Institute, or Organisation Collaboration

Sicame

STARTUP

to be update

SOCIAL, ECONOMIC, or ACADEMIC BENEFITS

Benefits to students