Dr.N.MATHAN KUMAR

@kpriet.ac.in

ASSOCIATE PROFESSOR/DEPARTMENT OF MECHANICAL ENGINEERING
KPR INSTITUTE OF ENGINEERING AND TECHNOLOGY

https://researchid.co/dr_n_mathankumar

RESEARCH, TEACHING, or OTHER INTERESTS

Mechanical Engineering, Materials Science, Metals and Alloys, Polymers and Plastics

Scopus Publications

406

Scholar Citations

Scholar h-index

Scholar i10-index

Scopus Publications

Influence of nano titanium oxide reinforced Al-7075 matrix composites in stir casting method
K.P. Dhanabalakrishnan, N. Mathan Kumar, T. Mothilal, Gori Yatika, H. Mohammed Ali, and S. Socrates
Elsevier BV

Experimental investigation on the effect of compression ratio over the performance of corn biodiesel–diesel blends as fuel in compression ignition engine
S. Kannan, S. Nagaraja, and N. Mathankumar
Informa UK Limited
The transesterified corn oil, as a biofuel over Direct Injection (DI) single-cylinder, four-stroke diesel engine, has been studied in this research. The Compression Ratio (CR) on performance parame...

Surface Wear Rate Prediction in Reinforced AA2618 MMC by Employing Soft Computing Techniques
N. Mathan Kumar, N. Mohanraj, S. Sendhil Kumar, A. Daniel Das, K. J. Sabareesaan, and Omar Adwan
Springer International Publishing

An experimental analysis of AA 2025 tube plate with commercial copper tube by gas tungsten arc welding
N. Mathan Kumar, S. Kannan, N. Mohanraj, and L. A. Kumaraswamidhas
AIP Publishing

Characterization and tribological analysis on AA 6061 reinforced with AlN and ZrB <inf>2</inf> in situ composites
N. Mathan Kumar and Lakshmi Annamalai Kumaraswamidhas
Elsevier BV

An investigation of abrasive and erosion behaviour of AA 2618 reinforced with Si<inf>3</inf>N<inf>4</inf>, AlN and ZrB<inf>2</inf> in situ composites by using optimization techniques
Senthil Kumaran Selvaraj, Mathan Kumar Nagarajan, and Lakshmi Annamalai Kumaraswamidhas
Springer Science and Business Media LLC

High temperature investigation on EDM process of Al 2618 alloy reinforced with Si<inf>3</inf>N<inf>4</inf>, ALN and ZrB<inf>2</inf>in-situ composites
N. Mathan Kumar, S. Senthil Kumaran, and L.A. Kumaraswamidhas
Elsevier BV

Wear behaviour of Al 261 8 alloy reinforced with Si<inf>3</inf>N<inf>4</inf>, AlN and ZrB<inf>2</inf> in situ composites at elevated temperatures
N. Mathan Kumar, S. Senthil Kumaran, and L.A. Kumaraswamidhas
Elsevier BV

Aerospace application on Al 2618 with reinforced – Si<inf>3</inf>N<inf>4</inf>, AlN and ZrB<inf>2</inf>in-situ composites
N. Mathan Kumar, S. Senthil Kumaran, and L.A. Kumaraswamidhas
Elsevier BV

An investigation of mechanical properties and corrosion resistance of Al2618 alloy reinforced with Si<inf>3</inf>N<inf>4</inf>, AlN and ZrB<inf>2</inf> composites
N. Mathan Kumar, S. Senthil Kumaran, and L.A. Kumaraswamidhas
Elsevier BV

An investigation of mechanical properties and material removal rate, tool wear rate in EDM machining process of AL2618 alloy reinforced with Si<inf>3</inf>N<inf>4</inf>, AlN and ZrB<inf>2</inf>composites
N. Mathan Kumar, S. Senthil Kumaran, and L.A. Kumaraswamidhas
Elsevier BV

An investigation of dryslinding wear behaviour of Al2618 reinforced with Si3N4, ZrB2 and AlN with room temperature

RECENT SCHOLAR PUBLICATIONS

An Investigation about Microstructures, Mechanical Properties and Corrosion Behaviour of the TIG-MIG Hybrid Welded Dissimilar UNS 2205 and is 2062 Steels
NM Raj, NM Kumar, S Nagaraja, S Paulsingarayar
Key Engineering Materials 979, 93-102 2024

Impact of Assorted Temperature on Yield and Surface Morphology of Multiple Layers of Carbon Nanotubes by Spurt Pyrolysis Techniques
NM Kumar, S Paulsingarayar, S Nagaraja, S Kalaiselvan
Materials Science Forum 1119, 101-110 2024

Development of Small Vocabulary Continuous Speech-to-Text System for Kannada Language/Dialects
GT Yadava, BG Nagaraja, SY Kumaran, AC Ramachandra, NMA Kumar
Indian Journal of Science and Technology 15 (45), 2476-2481 2022

Electrochemical arc micro-drilling of Nickel-Titanium SMAs utilizing GRA-based AHP and RSM
N KUMAR, A Kumar
2022

Mechanical Properties and Electrical Resistivity of the Friction Stir Spot-Welded Dissimilar Al–Cu Joints
N. Mohanraj, N. Mathan Kumar, P. Prathap, P. Ganeshan, K. Raja, V. Mohanavel ...
INTERNATIONAL JOURNAL OF POLIMER SCIENCES 2022 2022

Numerical Modelling of Plastic Behaviour and Temperature Distribution During FSW Process
N Kumar, MZ Ansari, H Singh
Recent Advances in Manufacturing Modelling and Optimization: Select 2022

Expounding the influence of micro/nano particles on mechanical and tribological properties of AA 7050 matrix composite: a review
N Kumar, S Maheshwari
Materials Today: Proceedings 62, 3361-3367 2022

Influence of nano titanium oxide reinforced Al-7075 matrix composites in stir casting method
KP Dhanabalakrishnan, NM Kumar, T Mothilal, G Yatika, HM Ali, ...
Materials Today: Proceedings 69, 1381-1386 2022

Surface Wear Rate Prediction in Reinforced AA2618 MMC by Employing Soft Computing Techniques
N Mathan Kumar, N Mohanraj, S Sendhil Kumar, A Daniel Das, ...
Intelligent Computing Paradigm and Cutting-edge Technologies: Proceedings of 2021

An experimental analysis of AA 2025 tube plate with commercial copper tube by gas tungsten arc welding
NM Kumar, S Kannan, N Mohanraj, LA Kumaraswamidhas
AIP Conference Proceedings 2283 (1) 2020

Hybrid Artificial Immune System Algorithm for SDST Flow Shop Scheduling with Due Date
GRS R Sanjeev Kumar, N.Mathan Kumar
Journal of Test Engineering and Management 83 (5), 3080-3088 2020

Solving SDST Flow shop Scheduling Problems using Hybrid Artificial Bee Colony Algorithms
NMK R Sanjeev Kumar, G Robert Singh
International Journal of Recent technology and Engineering 8 (4), 6617-6622 2019

CHARACTERIZATION AND TRIBOLOGICAL ANALYSIS ON AA 6061 REINFORCED WITH ALN AND ZRB2 INSITU COMPOSITES
DLAK Dr.N.Mathan Kumar
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY 2019

An investigation of abrasive and erosion behaviour of AA 2618 reinforced with Si 3 N 4 , AlN and ZrB2 in situ composites by using optimization techniques 2
LAK Senthil Kumaran Selvaraj, Mathan Kumar Nagarajan
ARCHIEVES OF CIVIL AND MECHANICAL ENGINEERING 17, 43-54 2016

AN Optimization of Erosive Wear on AA 2618 Reinforced with Si3N4 , AlN and ZrB2 In Situ Composites
DLAK Mr.N.Mathan Kumar, Dr.S.Senthil Kumaran
Applied Mechanics and Materials 852, 452-458 2016

Aerospace application on Al 2618 with reinforced–Si3N4, AlN and ZrB2 in-situ composites
NM Kumar, SS Kumaran, LA Kumaraswamidhas
Journal of Alloys and Compounds 672, 238-250 2016

High temperature investigation on EDM process of Al 2618 alloy reinforced with Si3N4, ALN and ZrB2 in-situ composites
NM Kumar, SS Kumaran, LA Kumaraswamidhas
Journal of Alloys and Compounds 663, 755-768 2016

Wear behaviour of Al 2618 alloy reinforced with Si3N4, AlN and ZrB2 in situ composites at elevated temperatures
NM Kumar, SS Kumaran, LA Kumaraswamidhas
Alexandria Engineering Journal 55 (1), 19-36 2016

Mechanical Characterization of Kevlar/Glass Hybrid Reinforced Polymer composite laminates
KJ Sandesh, KS Umashankar, BJ Manujesh, CK Thejesh, NM Kumar
Int. Adv. Res. J. Sci. Eng. Technol 3 (12), 90-97 2016

Synthesis and characterization of ZrB2/AI alloy insitu composites for tribiological applications
N Kumar
2016

MOST CITED SCHOLAR PUBLICATIONS

An investigation of mechanical properties and material removal rate, tool wear rate in EDM machining process of AL2618 alloy reinforced with Si3N4, AlN and ZrB2 composites
NM Kumar, SS Kumaran, LA Kumaraswamidhas
Journal of Alloys and Compounds 650, 318-327 2015
Citations: 84

An investigation of mechanical properties and corrosion resistance of Al2618 alloy reinforced with Si3N4, AlN and ZrB2 composites
NM Kumar, SS Kumaran, LA Kumaraswamidhas
Journal of Alloys and Compounds 652, 244-249 2015
Citations: 56

Aerospace application on Al 2618 with reinforced–Si3N4, AlN and ZrB2 in-situ composites
NM Kumar, SS Kumaran, LA Kumaraswamidhas
Journal of Alloys and Compounds 672, 238-250 2016
Citations: 53

CHARACTERIZATION AND TRIBOLOGICAL ANALYSIS ON AA 6061 REINFORCED WITH ALN AND ZRB2 INSITU COMPOSITES
DLAK Dr.N.Mathan Kumar
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY 2019
Citations: 33

Experimental investigation of tool geometry on mechanical properties of friction stir welding of AA6061
P Rohilla, N Kumar
International Journal of Innovative Technology and Exploring Engineering 3 2013
Citations: 25

AN Optimization of Erosive Wear on AA 2618 Reinforced with Si3N4 , AlN and ZrB2 In Situ Composites
DLAK Mr.N.Mathan Kumar, Dr.S.Senthil Kumaran
Applied Mechanics and Materials 852, 452-458 2016
Citations: 5

Expounding the influence of micro/nano particles on mechanical and tribological properties of AA 7050 matrix composite: a review
N Kumar, S Maheshwari
Materials Today: Proceedings 62, 3361-3367 2022
Citations: 1

Publications

1.N. Mathan Kumar, S. Senthil Kumaran, L.A. Kumaraswamidhas
An investigation of mechanical properties and corrosion resistance of Al2618 alloy
reinforced with Si3N4, AlN and ZrB2 composites.
Journal of Alloys and . 652 PP. 244-249(2015) : Elsevier
2.N.Mathankumar, S.Senthil Kumaran, L.A.Kumaraswamidhas
An investigation of mechanical properties and material removal rate, tool wear rate in
EDM machining process of Al2618 alloy reinforced with Si3N4, ALN and Zrb2
composites.
Journal of Alloys and . 650 PP. 318-327(2015): Elsevier
3.N.Mathankumar, S.Senthil Kumaran, L.A.Kumaraswamidhas
High temperature investigation on EDM process of Al 2618 alloy reinforced with Si3N4,
AlN and ZrB2 in-situ composites.
Journal of Alloys and . 663 :Elsevier
4.N.Mathankumar, S.Senthil Kumaran, L.A.Kumaraswamidhas
Wear behaviour of Al 2618 alloy reinforced with Si3N4, aln and Zrb2 in-situ composites
at elevated temperatures.
Alexandria Engineering Journal.
(2016) 55,19–36: DOI: 10.1016/j. Elsevier
5.N.Mathankumar, S.Senthil Kumaran,L.A.Kumaraswamidhas
Aerospace application on Al 2618 with reinforced – Si3N4, AlN and Zrb2 in-situ
composites.
Journal of Alloys and Compounds.
672 (2016) 238-250.DOI:10.1016/j. Elsevier
6.N.Mathankumar, S.Senthil Kumaran, L.A.Kumaraswamidhas
An Investigation of Abrasive and Erosion Behavior of AA 2618 Reinforced with
Si3N4,AlN and ZrB2 in-situ Composites using Optimization Techniques.
Journal of Archives of Civil and Mechanical Engineering
Elsevier
7.N.Mathankumar, L.A.Kumaraswamidhas,
Charecterization and Tribological Analysis on AA 6061 Reinforced with AlN and
ZrB2 Insitu Composites
Journal of Materials Research & Technology, Elsevier,