Dr. Bharath V

@rnsit.ac.in

Assistant Professor
Department of Mechanical Engineering, RNS Institute of Technology, Bengaluru, Karnataka, India

Dr. Bharath V is currently working as a Assistant Professor in Department of Mechanical Engineering, RNS Institute of Technology, Bengaluru-560098, Karnataka, India. He done his BE (Mechanical Engineering) from Kalpataru Institute of Technology, Tiptur (T), Tumakuru, Karnataka, India and M.Tech (Manufacturing Science and Engineering) from Siddaganga Institute of Technology, Tumakuru, Karnataka, India and Ph.D. (Mechanical Engineering Science) in Siddaganga Institute of Technology, Tumakuru and also worked as a Assistant Professor and Head, Department of Mechatronics Engineering (2021-2022), Sri Venkateshwara College of Engineering, Bengaluru, Karnataka, India and also worked as a Assistant Professor in the Department of Mechanical Engineering, Brindavan College of Engineering, Bangalore, for the period of seven years (2012-2019) and as a Research Assistant (2019-2021) in Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumakuru, Karnataka, India.

EDUCATION

B.E., M.Tech., Ph.D

RESEARCH INTERESTS

Materials Science Composites: Processing of Metal Matrix Composites, Diffusion Bonding, Wear studies, Mechanical Properties, Material Characterization, Coating, Severe Plastic Deformation
47

Scopus Publications

1090

Scholar Citations

17

Scholar h-index

25

Scholar i10-index

Scopus Publications

RECENT SCHOLAR PUBLICATIONS

  • Mechanical, Fractographic and Tribological Behaviour of Al7075 Aluminium Alloy Reinforced with B₄C, Gr, and ZrO₂ Produced Using a Two-Stage Stir Casting Method
    RS Kumar, HC Chittappa, M Vatnalmath, M Nagaral, V Bharath, V Auradi
    Journal of Bio-and Tribo-Corrosion 12 (2), 59 , 2026
    2026
    Citations: 1
  • Influence of Ceramic B4C Particulate Addition on Characterization, Tensile Fractography and Wear Behavior of Al6061 Alloy Matrix
    V Bharath, V Auradi, M Nagaral, K Annapoorna, SB Kumar, V Kukanur
    Journal of Bio-and Tribo-Corrosion 12 (1), 55 , 2026
    2026
    Citations: 1
  • Taguchi optimised ANN architecture for enhanced predictive accuracy in solid state diffusion bonding of Al-Cu alloy 2219 and copper
    AM Satish, M Vatnalmath, V Bharath, V Auradi, MG VijayKashimatt, ...
    Canadian Metallurgical Quarterly, 1-14 , 2025
    2025
  • Vacuum Diffusion Bonding of Dissimilar Metal Alloys AA2219 and Ti-6Al-4V: Influence of Bonding Pressure on Microstructure and Mechanical Properties of the Bonding Joint.
    M Vatnalmath, V Auradi, BV Murthy, M Nagaral, S Shetty, GB Kumar
    Iranian Journal of Materials Science & Engineering 22 (2) , 2025
    2025
  • High Temperature Wear Performance of Micron and Nano Coatings by Thermal Spray Technique-A Critical Review.
    CR Raghavendra, S Mathad, AM Satish, M Vatnalmath, V Auradi, ...
    Journal of Mines, Metals & Fuels 73 (3) , 2025
    2025
    Citations: 1
  • Influence of bonding temperature on solid-state diffusion bonded joints of AA2219 and Ti-6Al-4V dissimilar alloys—microstructure and mechanical characterisation
    M Vatnalmath, V Auradi, BV Murthy, M Nagaral
    Welding in the World 69 (2), 373-381 , 2025
    2025
    Citations: 5
  • Mechanical and wear characterization of nitrided Al-5% Ti-B metal matrix composite reinforced with Al2O3 particles
    M Uday, HR Vitala, BP Dileep, V Bharath, U Devadiga, V Auradi
    Research on Engineering Structures and Materials 11 (4), 1427-1439. , 2025
    2025
  • Effect of hybrid nano particle reinforcements on fractographic, mechanical and wear behavior of Al6061 alloy composites developed by ultrasonic assisted stir casting technique
    A Krishnappa, S Ramesh, VM Bharath, R Siddagangappa, S Ashokkumar, ...
    Fracture and Structural Integrity 19 (71), 285-301 , 2025
    2025
    Citations: 11
  • Microstructure, Mechanical and Fractographic behaviour of the Diffusion Welded Joints of AA2219 and Ti-6Al-4V for Propellant Tank Applications
    M Vatnalmath, V Auradi, V Bharath, A Bharadwaj, C Gowda, M Nagaral
    Frattura ed Integrità Strutturale 19 (71), 37-48 , 2025
    2025
    Citations: 3
  • EXPERIMENTAL INVESTIGATIONS OF MECHANICAL PROPERTIES OF EPOXY COMPOSITES REINFORCED WITH BAMBOO FIBRES: THE EFFECT OF SIC PARTICULATES AND CARBON FIBRES
    NN Prashanth S, Bharath V, V Auradi, Manjunath Vatnalmath, Madeva Nagaral ...
    ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING 22 (4), 66-71 , 2024
    2024
  • Experimental analysis of the rice husk and eggshell powder-based natural fibre composite
    KS Lokesh, KS Kumar, N Keerthan, R Revanth, S Sandeep, SB Lakkundi, ...
    Journal of The Institution of Engineers (India): Series D 105 (3), 1801-1808 , 2024
    2024
    Citations: 33
  • Mechanical and wear characterization of nitrided Al-5%Ti-B metal matrix composite reinforced with Al2O3 particles
    VA Uday M, H R Vitala, Dileep B P, Bharath V, Udaya Devadiga
    Research on Engineering Structures and Materials 11 (4), 1427-1439 , 2024
    2024
  • Synthesis of A356 alloy-variable particle sized boron carbide composites: investigations on mechanical behaviour and tensile fractography
    Z Ali, M Nagaral, V Muthuraman, V Auradi, V Bharath, S Kumar, R Kumar, ...
    Applied Engineering Letters 9, pp.162-171 , 2024
    2024
    Citations: 5
  • A METAL MATRIX COMPOSITE AND METHOD THERE OF
    RMNN Virupaxi Auradi, Bharath Veda Shantha Murthy, Madeva Nagral, Manjunath ...
    IN Patent 563,523 , 2024
    2024
  • SPRING LOADED FASTENER FOR DIFFUSION WELDING OF METALS AND ALLOYS
    MN Virupaxi Auradi, Manjunath Vatnalmath, Bharath Veda Shantha Murthy
    IN Patent 400834-001 , 2024
    2024
  • Optimization of stir casting parameters for the tensile behavior of nano Al2O3 and ZrO2 reinforced Al-Mg-Si alloy metal composites
    K Annapoorna, R Shobha, V Bharath, S Rajanna, ...
    Research on Engineering Structures and Materials, 1 , 2024
    2024
    Citations: 5
  • Impact of Bonding Temperature on Microstructure, Mechanical, and Fracture Behaviors of TLP Bonded Joints of Al2219 with a Cu Interlayer
    AR Manjunath Vatnalmath, Virupaxi Auradi, Varun Kumar J, Bharath Vedashantha ...
    ACS omega 8 (29), 26332–26339 , 2023
    2023
    Citations: 9
  • Al2014–alumina aerospace composites: particle size impacts on microstructure, mechanical, fractography, and wear characteristics
    BV Murthy, V Auradi, M Nagaral, M Vatnalmath, N Namdev, C Anjinappa, ...
    ACS omega 8 (14), 13444-13455 , 2023
    2023
    Citations: 31
  • Microstructure, Physical and Tensile Behaviour of B4C Particles Reinforced Al7010 Alloy Composites.
    K Mydur, M Kumar S., M Nagaral, V Auradi, B V., S T.A.
    Manufacturing Review 10, 1-11 , 2023
    2023
    Citations: 19
  • Optimization of Coating Parameters on Dry Sliding Wear Behaviour of Ni-Al2O3 Composite Coatings using Taguchi Method
    M Vatnalmath, CR Raghavendra, V Auradi, V Bharath, N Nagaraj, ...
    International Journal of Vehicle Structures & Systems 15 (1), 85-89 , 2023
    2023

MOST CITED SCHOLAR PUBLICATIONS

  • Preparation of 6061Al-Al2O3 MMC's by stir casting and evaluation of mechanical and wear properties
    V Bharath, M Nagaral, V Auradi, SA Kori
    Materials Today: Proceedings 6, 1658-1667 , 2014
    2014
    Citations: 376
  • Effect of Al2O3 particles on mechanical and wear properties of 6061Al alloy metal matrix composites
    M Nagaral, V Bharath, V Auradi
    J. Mater. Sci. Eng 2 (120), 2169-0022.1000120 , 2013
    2013
    Citations: 75
  • Development and Mechanical Characterisation of Al6061-Al 2 O 3 -Graphene Hybrid Metal Matrix Composites
    SB Boppana, S Dayanand, BV Murthy, M Nagaral, A Telagu, V Kumar, ...
    Journal of Composites Science 5 (6), 155 , 2021
    2021
    Citations: 63
  • Microstructural and wear behavior of Al2014-alumina composites with varying alumina content
    V Bharath, V Auradi, M Nagaral, SB Boppana, S Ramesh, K Palanikumar
    Transactions of the Indian Institute of Metals 75 (1), 133-147 , 2022
    2022
    Citations: 40
  • Evaluation of Wear Properties of Heat‐Treated Al‐AlB2 in‐situ Metal Matrix Composites
    S Dayanand, SB Boppana, V Auradi, M Nagaral, U Ravi, V Bharath
    Journal of Bio and Tribo Corrossion 7 (2), 1-11 , 2021
    2021
    Citations: 38
  • Preparation, characterization and mechanical properties of Al2O3 reinforced 6061 Al particulate MMCs
    V Bharath, M Nagaral, V Auradi
    International Journal of Engineering Research & Technology 1 (6), 1-6 , 2012
    2012
    Citations: 38
  • Characterization and Mechanical Properties of 2014 Aluminum Alloy Reinforced with Al 2 O 3p Composite Produced by Two-Stage Stir Casting Route
    V Bharath, SS Ajawan, M Nagaral, V Auradi, SA Kori
    Journal of The Institution of Engineers (India): Series C 100 (2), 277-282 , 2019
    2019
    Citations: 36
  • Experimental analysis of the rice husk and eggshell powder-based natural fibre composite
    KS Lokesh, KS Kumar, N Keerthan, R Revanth, S Sandeep, SB Lakkundi, ...
    Journal of The Institution of Engineers (India): Series D 105 (3), 1801-1808 , 2024
    2024
    Citations: 33
  • Experimental Investigations on Mechanical and Wear Behaviour of 2014Al–Al 2 O 3 Composites
    V Bharath, V Auradi, M Nagaral, SB Boppana
    Journal of Bio-and Tribo-Corrosion 6 (2), 45 , 2020
    2020
    Citations: 33
  • Al2014–alumina aerospace composites: particle size impacts on microstructure, mechanical, fractography, and wear characteristics
    BV Murthy, V Auradi, M Nagaral, M Vatnalmath, N Namdev, C Anjinappa, ...
    ACS omega 8 (14), 13444-13455 , 2023
    2023
    Citations: 31
  • Microstructural Evolution, Tensile Failure, Fatigue Behavior and Wear Properties of Al 2 O 3 Reinforced Al2014 Alloy T6 Heat Treated Metal Composites
    V Bharath, V Auradi, GBV Kumar, M Nagaral, M Chavali, M Helal, R Sami, ...
    Materials 15 (12), 4244 , 2022
    2022
    Citations: 31
  • Preparation of 6061Al-Al2O3 metal matrix composite by stir casting and evaluation of mechanical properties
    V Bharath, M Nagaral, V Auradi
    International Journal of Metallurgical & Materials Science and Engineering 2 … , 2012
    2012
    Citations: 31
  • Influence of Alumina Percentage on Microstructure, Mechanical and Wear Behaviour of 2014 Aluminium-Alumina Metal Matrix Composites
    V Bharath, V Auradi, M Nagaral, SB Boppana
    Jurnal Tribologi 25 (Issue-1), 29-44 , 2020
    2020
    Citations: 26
  • Microstructure, Physical and Tensile Behaviour of B4C Particles Reinforced Al7010 Alloy Composites.
    K Mydur, M Kumar S., M Nagaral, V Auradi, B V., S T.A.
    Manufacturing Review 10, 1-11 , 2023
    2023
    Citations: 19
  • Fractographic characterization of Al2O3p particulates reinforced Al2014 alloy composites subjected to tensile loading
    V Bharath, V Auradi, M Nagaral
    Fracture and Structural Integrity 15 (57), 14-23 , 2021
    2021
    Citations: 18
  • Microstructure and mechanical properties of Cu-coated Al2O3 particulate reinforced 6061 Al metal matrix composite
    BR Mithun, M Nagaral, V Auradi, V Bharath
    Materials Today: Proceedings 4 (10), 11015-11022 , 2017
    2017
    Citations: 18
  • Influence of Variable Particle Size Reinforcement on Mechanical and Wear Properties of Alumina Reinforced 2014Al Alloy Particulate Composite.
    B V, A DH, V Auradi, M Nagaral
    FME Transactions 48 (4) , 2020
    2020
    Citations: 17
  • Microstructure, tensile and impact behaviour of Si3N4 particles reinforced Al2024 matrix composites
    K Dharshan, TN Raju, M Nagaral, V Bharath, V Auradi, P Shantharaj, ...
    Materials Today: Proceedings 52, 1499-1503 , 2022
    2022
    Citations: 15
  • Microstructure, tensile and compression behaviour of B4C particles reinforced Al7075 matrix composites
    P Shantharaj, AS Prashanth, M Nagaral, V Bharath, V Auradi, K Dharshan
    Materials Today: Proceedings 52, 1135-1139 , 2022
    2022
    Citations: 15
  • Synthesis, microstructural characterization, mechanical, fractographic and wear behavior of micro B4C particles reinforced Al2618 alloy aerospace composites.
    G Veeresha, B Manjunatha, V Bharath, M Nagaral, V Auradi
    Frattura ed Integrità Strutturale , 2022
    2022
    Citations: 12