Dewi Kusuma Arti

@brin.go.id

Research Center for Advanced Material
National Research and Innovation Agency (BRIN)

Dewi Kusuma Arti


               Download Compact PDF  
https://researchid.co/dewikusumaarti

RESEARCH INTERESTS

Rubber technology, analytical chemistry
23

Scopus Publications

138

Scholar Citations

7

Scholar h-index

3

Scholar i10-index

Scopus Publications

  • Performance of Rubber Seals for Cable-Based Tsunameter with Varying Ethylene Propylene Diene Monomer and Filler Content
    Riastuti Fidyaningsih, Dewi Kusuma Arti, Herri Susanto, Ade Sholeh Hidayat, Mahendra Anggaravidya, Akhmad Amry, Tika Mustika, Muslim Efendi Harahap, Vian Marantha Haryanto, Mochammad Dachyar Effendi
    Journal of Composites Science, 2025
    This study evaluates the performance of ethylene propylene diene monomer (EPDM) composites for rubber sealing applications in a cable-based tsunami system. Rubber composites were prepared using EPDM rubber with varying monomer and filler content to determine the most suitable composite. Mechanical characterization reveals that the composition of EPDM and the amount of filler loading influence the mechanical properties. Dynamic mechanical analysis shows that ethylene and 5-ethylene-2-norbornene (ENB) content influence the glass transition and viscoelastic behavior of the composite. Thermal analysis of rubber composites using EPDM containing 70% ethylene and 5% ENB indicates no change in thermal stability due to prolonged immersion in seawater. Visual inspection using a microscope reveals no cracks on the surface of the rubber seal after the pressure chamber test for rubber composites utilizing EPDM with 70% ethylene and 5% ENB. It was shown that EPDM containing 70% ethylene and 5% ENB, with optimal reinforcement with 80 phr carbon black, exhibits the best performance for rubber sealing applications in subsea environments.
  • Unrevealing the Impact of Annealing Condition on Catalytic Activity of PtNi Alloy Electrode Towards Oxygen Reduction Reaction
    Anindya Pramudya Wardhani, Salwaa Tanaya, Retna Deca Pravitasari, Damisih Damisih, Dewi Kusuma Arti, et al.
    Indonesian Journal of Chemistry, 2025
    Alloying platinum (Pt) with transition metals such as nickel (Ni) has been an effective approach for reducing Pt loading and enhancing catalytic activities towards the sluggish oxygen reduction reaction (ORR) on the cathode of proton exchange membrane fuel cell (PEMFC). In this work, we advance the fabrication of PtNi alloy electrodes through direct synthesis on the gas diffusion layer (GDL) utilizing wet chemical reduction methods. The catalytic activities and binding interaction between Pt and Ni are optimized through annealing PtNi electrodes at 200 °C under different gas flows of N2 and the mixture of H2/N2 at 5%/95%. The physical characterization using X-ray diffraction (XRD) analysis and scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDX) show the significant effect of the annealing environment on the morphology and distribution of the PtNi alloy catalyst on the GDL surface. The optimized electrodes exhibited enhanced ORR mass activity, with values of 8.17 and 18.26 mA mg−1 for PtNi annealed with N2 and N2/H2, respectively, surpassing the benchmark Pt/C (5.25 mA mg−¹). These results underscore the critical role of the annealing environment in optimizing the catalytic performance of PtNi-based electrodes for PEMFC applications, offering insights into more efficient fuel cell technologies.
  • Enhancing physicochemical properties of rice straw for reinforcement in composite using combined Ultrasound-Plasma treatment
    Retno Wulandari, Dwi Novriadi, Ade Mundari Wijaya, Muhammad Yunus, Reza Pahlevi Rudianto, Annisa Rifathin, Dewi Kusuma Arti, Fitria Ika Aryanti, Maharani Kusumaningrum, Harianingsih Harianingsih
    Applied Chemical Engineering, 2025
    Rice straw waste holds considerable potential as a bio-reinforcement material in polymer composites; however, effective utilization requires surface modification to enhance fiber–matrix interfacial adhesion. This study investigates environmentally friendly surface modification methods, including sodium carbonate treatment with ultrasound (SNCO5%), plasma treatment (PT), and their combination (SNCO5%-PT). Comprehensive characterizations were performed, including surface morphology, O/C ratio, silica content, functional group analysis, and X-ray diffraction. The SNCO5%-PT treatment resulted in the highest silica enrichment and O/C ratio, with increases of 4.5 and 4.75 times, respectively, compared to the untreated sample (NT). FTIR analysis revealed intensified absorption peaks in SNCO5%-PT, particularly at wavenumbers associated with hydroxyl groups and absorbed water in cellulose. XRD analysis further confirmed that SNCO5%-PT achieved the largest crystallite size and highest crystallinity index among all treatments. These findings suggest that the combined treatment enhances the physicochemical properties of rice straw. Future work should focus on evaluating the mechanical performance of treated fibers in polyethylene composite systems, as well as assessing interfacial adhesion and durability under application-relevant conditions.
  • Integrating Fuel Cell Technology in Microgrid Systems for Lower Carbon Emission
    Arif Darmawan, Khotimatul Fauziah, Toha Zaky, Yuli Astriani, Asih Kurniasari, Kurniawan, Ade Utami Hapsari, Retna Deca Pravitasari, Agustanhakri, Sri Rahayu, Damisih, Dewi Kusuma Arti, Bambang Triwibowo, Oka Arjasa Pradipta, Abdul Hamid Budiman, Zainal Arifin, Rodzi Gusti Akbar Sarjana, Agus Setiawan, Eniya Listiani Dewi, Deni Shidqi Khaerudini, Jarot Raharjo
    Green Energy and Technology, 2025
  • Comparative Study of Commercial Glass Fiber-Reinforced Polyester Composite Beams: Thermal Behavior and Durability to QUV Exposure
    Retno Wulandari, Fitri Ayu Radini, Muhammad Yunus, Dewi Kusuma Arti, Harianingsih, Dasep Rusmana, Ade Pratama
    Journal of the Institution of Engineers India Series D, 2024
  • Enhancing airless tire performance for military vehicles: natural rubber compound with carbon black Fillers N220 and N550 with dynamic mechanical analysis approach
    Riri Murniati, Arini Fitria Gunawan, Ade Sholeh Hidayat, Liszulfah Roza, Dewi Kusuma Arti, Indriasari, Akhmad Amry, Mikrajuddin Abdullah
    Journal of Polymer Research, 2024
  • Optimization of Natural Rubber Formulation for Military Vehicle Tread Using Filler Carbon Black Type N220/N550
    Arini Fitria Gunawan, Ade Sholeh Hidayat, Riri Murniati, Herri Susanto, Dewi Kusuma Arti, Wahyu Tri Utami, Mahendra Anggaravidya, Mohammad Soleh Iskandar, Riastuti Fidyaningsih, Lies Agustine, Idvan, Indriasari, Akhmad Amry
    E3s Web of Conferences, 2024
    This study aims to optimize the formulation of natural rubber (Hevea brasiliensis) into a compound for applications in military vehicles when passing through various field conditions. Natural rubber types SIR 20 and RSS 1 were used with Carbon Black types N220 and N550 as fillers. In this study, samples that were both normal and samples that had aged for 72 hours at 70°C were created. The results showed that the mixture of RSS 1 - CB N220 (i.e., 100 phr–75 phr) influenced strength and stiffness. The physical and mechanical properties of the specimens, including curing time, tensile strength, tear strength, elongation at break, and compression set had been defined. By utilizing the resulting mechanical characteristics, rubber compounds are optimized to meet the specific requirements of airless tires, including durability, comfort, and performance. It is anticipated to create an airless tire that provides essential performance while reducing the risk of punctures and flats.
  • Utilization of Rubber Waste for Manufacture of Rubber Conical Bonded
    Akhmad Amry, Mahendra Anggaravidya, Vika Rahmawati, Riski Ayumustiko, Ade Sholeh Hidayat, Dewi Kusuma Arti, Indriasari, Riastuti Fidyaningsih, Wahyu Tri Utami, Herry Susanto, Lies A. Wisojodharmo, Idvan, Widia Bagja, Edi Setiana
    E3s Web of Conferences, 2024
    Rubber Conical Bonded (RCB) is a component that connects the wheel with the train bogie, which functions to dampen vibration and noise. This RCB is made of rubber. In this research, RCB vulcanizate will be made with a mixture of natural rubber (RSS 1) and rubber waste. Rubber waste is the residue from the production process of technical rubber goods or rubber technical goods that are no longer used. This rubber waste goes through a devulcanization process to be reused as a raw material. In this study, rubber waste derived from the residue of the production process was varied with the phr ratio as follows: RSS 1 / Rubber waste / Devulcanized rubber waste (RCB0: 100/0/0; RCB10: 90/10/0; RCB30: 70/30/0; RCB50: 50/50/0; RCB10X: 90/0/10; RCB30X: 70/0/30). The vulcanizate obtained was then subjected to physical characterization (before and after aging 24 hrs; 70oC) and compared with the technical specifications of the RCB. Physical characterization includes Tensile Strength (min 14 N/mm2), Tear Strength (min 26 N/mm2), Hardness Shore A (50±5), Elongation at Break (min 400%), and Compression Set (max 30%). The results show that all variations meet the specifications for tensile strength, tear strength, and hardness.
  • Influence of NR/EPDM Ratios on the Performance of Pneumatic Fenders in Seawater
    Lies Agustine Wisojodharmo, Indriasari, Akhmad Amry, Galih Taqwatomo, Riastuti Fidyaningsih, Dewi Kusuma Arti, Wahyu Tri Utami, Dita Adi Saputra, Muhammad Dikdik Gumelar, Saddam Husin, Herri Susanto, Ade Sholeh Hidayat, Mahendra Anggaravidya, Idvan, Mohamad Sholeh Iskandar
    E3s Web of Conferences, 2024
    The performance of pneumatic fenders in seawater is crucial to ensure safety and serviceability. Hence, the objective of this study is to investigate the performance of compound formulations of two different types of carbon black N660 and N220 at various NR/EPDM (Natural Rubber/Ethylene Propylene Diene Monomer) ratios of 100/0; 90/10; 80/20, and 70/30 in artificial seawater at 95°C for 30 days. The mechanical properties of rubber compounds were measured and compared before and after aging in seawater. Comparing two types of carbon black, no significant difference in tensile, elongation, tear strength, and compression set at the same blend ratios after aging in seawater. Nevertheless, the abrasion resistance of N220 is lower than that of N660 before and after aging in seawater due to insufficient dispersion. Adding high crystalline EPDM in the blend results in lower mechanical properties change than pure NR after aging in seawater. In addition, the blend contains EPDM imparts high abrasion resistance in seawater. Using EPDM up to 30 phr in the blend with NR indicates the possibility of utilizing this high oxidation stability of rubber as a pneumatic fender.
  • Epoxy - Glass microballoon syntactic foam: Study the effect of composition and microballoon type on density, porosity, and compressive strength
    Jayatin, Suryadi, Dewi K. Arti, Ade S. Hidayat, Riastuti Fidyaningsih
    Aip Conference Proceedings, 2024
    Density and compressive strength are two important properties in the manufacture of syntactic foam materials. Syntactic foams are composites that are filled with hollow particles (microballoon). In this research, epoxy resin and glass microballoon were used as the main component. Two ways are usually done to get the syntactic foam properties as desired. The first way is by adjusting the composition of the microballoon and the second way is by choosing the type of microballoon. The effect of two types of microballoons with different crushing strengths (K15 and iM16K) on density, porosity, and compressive strength was carried out in this study. Instead of microballoons type, the composition of vol.% microoballoons varied as 40, 50, 60, 70, and 80% to investigate the influence of formulation. The results showed that at the same composition, microballoon with high crushing strength obtained higher compressive strength, but the density for microballoon with lower crush strength is lower. The increase in volume fraction for both types of microballoons resulted decreasing in density. With the use of low crushing strength microballoons, the compressive strength properties were decreasing with the higher volume fraction. But for microballoons with high crushing strength, there was no significant change in volume fraction variation.
  • Mechanical Properties of Recycling Mixed Waste Plastic Predicted on Pallet Application Using Finite Element Analysis
    Galih Taqwatomo, Dwi Novriadi, Boy Marsaputra Panjaitan, Hariaman Prasetyo, Yusuf Subagyo, Aditya Eka Mulyono, Sri Rahayu, Dewi Kusuma Arti, Oka Pradipta Arjasa Putra
    E3s Web of Conferences, 2024
  • Influence of Processing Oil Content on Rubber-Filler Interactions in Silica/Carbon Black-Filled Natural Rubber Compounding
    Dewi Kusuma Arti, Wanita Donwang
    E3s Web of Conferences, 2024
  • The Effect of Oligomeric Resins on Tire Traction of SBR/BR-Based Rubber Blends
    Indriasari Indriasari, Suppachai Sattayanurak, Riastuti Fidyaningsih, Ade Sholeh Hidayat, Mahendra Anggaravidya, Dewi Kusuma Arti, Akhmad Amry, Wahyu Tri Utami, Idvan Idvan, Herri Susanto, Sri Rahayu, Muhammad Dikdik Gumelar, Mohamad Soleh Iskandar, Lies Agustine Wisojodharmo
    Advances in Science and Technology, 2024
  • Effect of Ribbed Smoked Sheet/Ethylene Propylene Diene Monomer Ratio on Mechanical Properties of Compounds for Pneumatic Fender Applications
    Riastuti Fidyaningsih, Saddam Husin, Herri Susanto, Idvan Idvan, Indriasari Indriasari, Ade Sholeh Hidayat, Mahendra Anggaravidya, Dewi Kusuma Arti, Wahyu Tri Utami, Galih Taqwatomo, Lies Agustine Wisojodharmo, Akhmad Amry, Dita Adi Saputra, Muhammad Dikdik Gumelar, Mohamad Soleh Iskandar
    Advances in Science and Technology, 2024
  • Comparative Analysis of NR/EPDM Ratio and Carbon Black Selection on Mechanical Properties of Vulcanized Pneumatic Fenders
    Mahendra Anggaravidya, Dita Adi Saputra, Muhammad Dikdik Gumelar, Galih Taqwatomo, Saddam Husin, Dewi Kusuma Arti, Mohamad Soleh Iskandar, Ade Sholeh Hidayat, Riastuti Fidyaningsih, Akhmad Amry
    Evergreen, 2023
  • Rheological Behavior on Various Mixing Times for Natural Rubber/Nano Carbon Black Composites
    Dody Andi Winarto, Retno Wulandari, Nurul Jamilah, Dewi Kusuma Arti, Chandra Liza, Mohamad Irfan Fathurrohman, Mochamad Chalid
    Aip Conference Proceedings, 2023
  • Effect of bonding agent ratio on mechanical and physical properties of natural rubber compounds for rubber to textile adhesion applications
    Hidayat, Ade Sholeh, Arti, Dewi Kusuma, Wahyu Tri Utami, Siti Amalina Azahra, Anggaravidya, Mahendra, et al.
    Engineering and Applied Science Research, 2023
  • Simultaneous quantification of volatile fatty acids and nonvolatile organic acids in Hevea brasiliensis latex
    Dewi Kusuma Arti, Wilairat Cheewasedtham, Thitima Rujiralai
    Journal of Separation Science, 2022
  • Mastication Process of Natural Rubber/Butadiene Rubber Blending: Validation Method on Influence of Peptizer
    Dewi K. Arti, Ade S. Hidayat, Ika M. Ulfah, Herri Susanto, Lies A. Wisojodharmo, Ahmad Dandi
    Macromolecular Symposia, 2020
  • Optimization of Standard Indonesian Rubber 20 and Ethylene Propylene Diene Monomer Blending for Ship Launcher Application
    Ade S. Hidayat, Jayatin, Dewi K. Arti, Muhammad D. Gumilar, Herri Susanto, Amelia Larasati, Ulfa Pratiwi
    Macromolecular Symposia, 2020
  • Properties of Natural Rubber/Chloroprene Rubber Blend for Rubber Fender Application: Effects of Blend Ratio
    Mahendra Anggaravidya, Akhmad Amry, Dewi K. Arti, Eryanti Kalembang, Herri Susanto, Ade S. Hidayat, Caroline D. Limansubroto
    Macromolecular Symposia, 2020
  • The influence of natural rubber - Butadiene rubber and carbon black type on the mechanical properties of tread compound
    L A Wisojodharmo, R Fidyaningsih, D A Fitriani, D K Arti, Indriasari, H Susanto
    Iop Conference Series Materials Science and Engineering, 2017
  • Preparation of poly eter eter keton as alternative membrane for direct methanol fuel cell (DMFC)
    T. Kusworo, E. Dewi, D. K. Arti, A. Dhuhita, A. Ismail, M. Norddin, Budiyono
    Middle East Journal of Scientific Research, 2013

RECENT SCHOLAR PUBLICATIONS

  • Performance of Rubber Seals for Cable-Based Tsunameter with Varying Ethylene Propylene Diene Monomer and Filler Content
    R Fidyaningsih, DK Arti, H Susanto, AS Hidayat, M Anggaravidya, A Amry, ...
    Journal of Composites Science 9 (12), 705 , 2025
    2025
  • Esterified Illipe Butter-Based Fatty Amine as a Bio-Based Multifunctional Additive for NR/BR Blends Reinforced with a Silica/Silane System in Green Tire Tread Development
    MI Fathurrohman, S Puspitasari, NA Kinasih, DK Arti
    Journal of Applied Agricultural Science and Technology 9 (2), 239-254 , 2025
    2025
  • Integrating Fuel Cell Technology in Microgrid Systems for Lower Carbon Emission
    A Darmawan, K Fauziah, T Zaky, Y Astriani, A Kurniasari, Kurniawan, ...
    Decarbonizing Power Generation Sectors Using Biomass and Hydrogen-Based … , 2025
    2025
    Citations: 1
  • Unrevealing the Impact of Annealing Condition on Catalytic Activity of PtNi Alloy Electrode Towards Oxygen Reduction Reaction
    AP Wardhani, S Tanaya, RD Pravitasari, D Damisih, DK Arti, S Rahayu, ...
    Indonesian Journal of Chemistry 25 (2), 444-457 , 2025
    2025
    Citations: 1
  • STUDI KOMPARATIF PENGARUH ASAM FOSFAT TERHADAP SIFAT FISIK DAN MEKANIK NR DAN EPDM
    AN OCTAVIANI, D FERIYANTO, K KURNIAWAN, DK ARTI, H NUR
    JURNAL REKAYASA ENERGI DAN MEKANIKA Учредители: Institut Teknologi Nasional … , 2025
    2025
  • Optimization of Natural Rubber Formulation for Military Vehicle Tread Using Filler Carbon Black Type N220/N550
    AF Gunawan, AS Hidayat, R Murniati, H Susanto, DK Arti, WT Utami, ...
    E3S Web of Conferences 503, 08001 , 2024
    2024
    Citations: 1
  • Comparative study of commercial glass fiber-reinforced polyester composite beams: Thermal behavior and durability to QUV exposure
    R Wulandari, FA Radini, M Yunus, DK Arti, Harianingsih, D Rusmana, ...
    Journal of The Institution of Engineers (India): Series D 105 (3), 1331-1340 , 2024
    2024
    Citations: 4
  • Mechanical properties of recycling mixed waste plastic predicted on pallet application using finite element analysis
    G Taqwatomo, D Novriadi, B Marsaputra Panjaitan, H Prasetyo, ...
    E3S Web of Conferences 483, 03019 , 2024
    2024
    Citations: 3
  • Influence of processing oil content on rubber-filler interactions in silica/carbon black-filled natural rubber compounding
    D Kusuma Arti, W Donwang
    E3S Web of Conferences 481, 06007 , 2024
    2024
    Citations: 6
  • PENGGUNAAN KOMPATIBILISER KARET ALAM EPOKSIDASI (ENR) PADA KOMPON TELAPAK BAN RAMAH LINGKUNGAN
    MI Fathurrohman, NA Kinasih, S Puspitasari, DK Arti
    Jurnal Penelitian Karet, 57-74 , 2024
    2024
  • Enhancing airless tire performance for military vehicles: natural rubber compound with carbon black Fillers N220 and N550 with dynamic mechanical analysis approach
    R Murniati, AF Gunawan, AS Hidayat, L Roza, DK Arti, Indriasari, A Amry, ...
    Journal of Polymer Research 31 (5), 137 , 2024
    2024
    Citations: 9
  • Effect of Ribbed Smoked Sheet/Ethylene Propylene Diene Monomer Ratio on Mechanical Properties of Compounds for Pneumatic Fender Applications
    R Fidyaningsih, S Husin, H Susanto, I Idvan, I Indriasari, AS Hidayat, ...
    Advances in Science and Technology 141, 39-45 , 2024
    2024
  • The Effect of Oligomeric Resins on Tire Traction of SBR/BR-Based Rubber Blends
    I Indriasari, S Sattayanurak, R Fidyaningsih, AS Hidayat, M Anggaravidya, ...
    Advances in Science and Technology 141, 47-53 , 2024
    2024
    Citations: 1
  • Epoxy–glass microballoon syntactic foam: Study the effect of composition and microballoon type on density, porosity, and compressive strength
    Jayatin, Suryadi, DK Arti, AS Hidayat, R Fidyaningsih
    AIP Conference Proceedings 3003 (1), 020036 , 2024
    2024
  • Influence of NR/EPDM Ratios on the Performance of Pneumatic Fenders in Seawater
    LA Wisojodharmo, I Indriasari, A Amry, G Taqwatomo, R Fidyaningsih, ...
    E3S Web of Conferences 503, 06001 , 2024
    2024
    Citations: 1
  • Utilization of Rubber Waste for Manufacture of Rubber Conical Bonded
    A Amry, M Anggaravidya, V Rahmawati, R Ayumustiko, AS Hidayat, ...
    E3S Web of Conferences 503, 08007 , 2024
    2024
  • Synthesis of NMC111 Cathode from Spent Lithium-Ion Batteries (LIBs) using Acetic Acid as a Leaching Agent and Flame Assisted Spray Pyrolysis
    DA Saputra, S Rahayu, MD Gumelar, OP Arjasa, S Husin, G Taqwatomo, ...
    2023
  • Rheological behavior on various mixing times for natural rubber/nano carbon black composites
    DA Winarto, R Wulandari, N Jamilah, DK Arti, C Liza, MI Fathurrohman, ...
    AIP Conference Proceedings 2902 (1), 070006 , 2023
    2023
  • Dynamic mechanical analysis of Standard Indonesian Rubber/ Chloroprene Rubber for seismic base isolator application
    DK Arti, AS Hidayat, DA Saputra, MD Gumelar, A Amry, M Anggaravidya, ...
    KGK-KAUTSCHUK GUMMI KUNSTSTOFFE 2023 (4), 53-57 , 2023
    2023
  • PENGARUH JENIS KARET TERHADAP KETAHANAN SODIUM HIDROKSIDA UNTUK APLIKASI RUBBER LINING
    WT Utami, DK Arti, I Indriasari, R Fidyaningsih, AS Hidayat, A Amry, ...
    Warta Perkaretan 42 (1), 59-66 , 2023
    2023

MOST CITED SCHOLAR PUBLICATIONS

  • The influence of natural rubber–butadiene rubber and carbon black type on the mechanical properties of tread compound
    LA Wisojodharmo, R Fidyaningsih, DA Fitriani, DK Arti, Indriasari, ...
    IOP Conference Series: Materials Science and Engineering 223 (1), 012013 , 2017
    2017
    Citations: 28
  • Properties of natural rubber/chloroprene rubber blend for rubber fender application: Effects of blend ratio
    M Anggaravidya, A Amry, DK Arti, E Kalembang, H Susanto, AS Hidayat, ...
    Macromolecular Symposia 391 (1), 1900150 , 2020
    2020
    Citations: 18
  • Karakterisasi dan Uji Kinerja SPEEK, cSMM dan Nafion untuk Aplikasi Direct Methanol Fuel Cell (DMFC)
    A Dhuhita, D Kusuma Arti
    Jurusan Teknik Kimia Fak. Teknik UNDIP , 2010
    2010
    Citations: 11
  • Enhancing airless tire performance for military vehicles: natural rubber compound with carbon black Fillers N220 and N550 with dynamic mechanical analysis approach
    R Murniati, AF Gunawan, AS Hidayat, L Roza, DK Arti, Indriasari, A Amry, ...
    Journal of Polymer Research 31 (5), 137 , 2024
    2024
    Citations: 9
  • Effect of tackifier addition on cushion compound formulation for tire retreading application
    LA Wisojodharmo, DK Arti, RD Pravitasari, AS Hidayat, AI Nisa, ...
    Jurnal Kimia Terapan Indonesia 21 (2), 81-90 , 2020
    2020
    Citations: 9
  • Mastication process of natural rubber/butadiene rubber blending: Validation method on influence of peptizer
    DK Arti, AS Hidayat, IM Ulfah, H Susanto, LA Wisojodharmo, A Dandi
    Macromolecular Symposia 391 (1), 1900175 , 2020
    2020
    Citations: 7
  • Effect of peptizer in mastication process of natural rubber/butadiene rubber blending: Rheological and mechanical properties
    AS Hidayat, DK Arti, LA Wisojodharmo, ME Harahap, H Susanto
    International Journal of Engineering & Scientific Research 7 (7), 16-22 , 2019
    2019
    Citations: 7
  • Influence of processing oil content on rubber-filler interactions in silica/carbon black-filled natural rubber compounding
    D Kusuma Arti, W Donwang
    E3S Web of Conferences 481, 06007 , 2024
    2024
    Citations: 6
  • Effect of bonding agent ratio on mechanical and physical properties of natural rubber compounds for rubber to textile adhesion applications
    AS Hidayat, DK Arti, WT Utami, SA Azahra, M Anggaravidya, DA Saputra, ...
    Engineering and Applied Science Research 50 (1), 82-91 , 2023
    2023
    Citations: 6
  • Simultaneous quantification of volatile fatty acids and nonvolatile organic acids in Hevea brasiliensis latex
    DK Arti, W Cheewasedtham, T Rujiralai
    Journal of Separation Science 45 (18), 3491-3500 , 2022
    2022
    Citations: 6
  • Comparative study of commercial glass fiber-reinforced polyester composite beams: Thermal behavior and durability to QUV exposure
    R Wulandari, FA Radini, M Yunus, DK Arti, Harianingsih, D Rusmana, ...
    Journal of The Institution of Engineers (India): Series D 105 (3), 1331-1340 , 2024
    2024
    Citations: 4
  • Optimization of Standard Indonesian Rubber 20 and Ethylene Propylene Diene Monomer Blending for Ship Launcher Application
    AS Hidayat, Jayatin, DK Arti, MD Gumilar, H Susanto, A Larasati, U Pratiwi
    Macromolecular Symposia 391 (1), 1900135 , 2020
    2020
    Citations: 4
  • Mechanical properties of recycling mixed waste plastic predicted on pallet application using finite element analysis
    G Taqwatomo, D Novriadi, B Marsaputra Panjaitan, H Prasetyo, ...
    E3S Web of Conferences 483, 03019 , 2024
    2024
    Citations: 3
  • Comparative analysis of NR/EPDM ratio and carbon black selection on mechanical properties of vulcanized pneumatic fenders
    M Anggaravidya, DA Saputra, MD Gumelar, G Taqwatomo, S Husin, ...
    Transdisciplinary Research and Education Center for Green Technologies … , 2023
    2023
    Citations: 3
  • Pengaruh variasi komposisi bahan pengisi carbon black dan silika pada sifat viskoelastis kompon karet untuk tread ban
    DK Arti, R Fidyaningsih, A Rohmah, LA Wisojodharmo, H Purwati
    Majalah Kulit, Karet, dan Plastik 34 (1), 1-8 , 2018
    2018
    Citations: 3
  • Preparation of Poly Eter Eter Keton as Alternative Membrane for Direct Methanol Fuel Cell (DMFC)
    TD Kusworo, EL Dewi, DK Arti, A Dhuhita, AF Ismail, MNA MohdNorddin
    Middle-East Journal of Scientific Research 18 (9), 1240-1252 , 2013
    2013
    Citations: 3
  • Pengaruh Rasio Paraffinic Oil terhadap Aromatic Oil terhadap Sifat Mekanis Kompon Karet Alam
    DA Saputra, DK Arti, M Riastuti Fidyaningsih, LAW Anggaravidya, ...
    Majalah Polimer Indonesia 21 (1), 69-80 , 2018
    2018
    Citations: 2
  • KARAKTERISASI GRAFIT MATRIKS POLISTIREN SEBAGAI MATERIAL UNTUK SEPARATOR PROTON EXCHANGE MEMBRANE FUEL CELL
    LA Wisojodharmo, DK Arti, EL Dewi
    Jurnal Sains Materi Indonesia 14 (2) , 2013
    2013
    Citations: 2
  • Integrating Fuel Cell Technology in Microgrid Systems for Lower Carbon Emission
    A Darmawan, K Fauziah, T Zaky, Y Astriani, A Kurniasari, Kurniawan, ...
    Decarbonizing Power Generation Sectors Using Biomass and Hydrogen-Based … , 2025
    2025
    Citations: 1
  • Unrevealing the Impact of Annealing Condition on Catalytic Activity of PtNi Alloy Electrode Towards Oxygen Reduction Reaction
    AP Wardhani, S Tanaya, RD Pravitasari, D Damisih, DK Arti, S Rahayu, ...
    Indonesian Journal of Chemistry 25 (2), 444-457 , 2025
    2025
    Citations: 1