Control and Systems Engineering, Renewable Energy, Sustainability and the Environment, Energy Engineering and Power Technology, Industrial and Manufacturing Engineering
69
Scopus Publications
Scopus Publications
Globally optimal basic design of multiple-unit heat exchangers Miguel J. Bagajewicz, Andre L. M. Nahes, Eduardo M. Queiroz, Diego G. Oliva, Javier A. Francesconi, André L. H. Costa Aiche Journal, 2025 A novel approach (Complete Set Trimming) to address the globally optimal design of multiple‐unit heat exchangers (Shell and Tube, Double Pipe, Plate, etc.) is presented. Three arrangements: Series, Parallel, Series–Parallel, and Parallel–Series, for minimizing area, CAPEX, or total annualized cost are considered. The geometry of all (equal) units is determined together with the number of units and the fluid allocation. The article illustrates the need to minimize CAPEX explicitly instead of using the minimization of Area as its proxy objective function. In addition, the influence of available pressure drop in the final optimal design is also discussed. Finally, the article shows that solutions obtained by minimizing the Total Annualized Cost (TAC) render different solutions than those obtained by minimizing CAPEX, indicating that pumping costs matter, depending on the balance between operational and capital costs.
A Framework for Developing Semiquantitative Chemical Methods for Offshore Environments Using Smartphones H. V. P. Vieira, R. M.M. Barcellos, M. L. A. Gonçalves, R. Mesquita, M. A. G. Teixeira, A. Mehl, E. M. Queiroz SPE Journal, 2025 Summary In oil and gas (O&G) offshore production units, specialized equipment and qualified analysts are not available. Therefore, simple and easy-to-implement chemical analysis methodologies are essential, making the digital image-based analytical methodology (DIBAM) a promising technique. However, in order for DIBAM to achieve satisfactory results, certain preliminary steps must be followed. In this paper, we share our knowledge on the key aspects required for the development of DIBAMs, including the selection of chemical methodologies, type of sample holder, image acquisition chamber, and, finally, image processing. We present a DIBAM developed following the proposed guidelines, demonstrating that a semiquantitative method can be achieved with a maximum error of 10%—a reasonable margin for the rapid resolution of offshore issues.
Globally optimal design of kettle vaporizers Guilherme de M. Sales, Eduardo M. Queiroz, André L.M. Nahes, Miguel J. Bagajewicz, André L.H. Costa Thermal Science and Engineering Progress, 2021
Cooling water sources diagram Flávio S. Francisco, Fernando L.P. Pessoa, Eduardo M. Queiroz Applied Thermal Engineering, 2021
Water sources diagram and its applications Ewerton Emmanuel da Silva Calixto, Fernando Luiz Pellegrini Pessoa, Reinaldo Coelho Mirre, Flávio da Silva Francisco, Eduardo Mach Queiroz Processes, 2020 Water Sources Diagram (WSD) has proved to be one of the most efficient methods to reduce industrial freshwater consumption and to provide a minimum amount of wastewater to be treated. Different types of industry have been benefited from the use of this technique, which resulted in great savings in the design of the effluent treatment systems. Among the successful case studies, we mention herein applications in systems with wastewater treatment, thermal and water plants’ integration, oil refineries, petrochemicals, batch processes, pulp and paper plants, and textile plants. The degree of WSD maturity motivated researchers to not only improve WSD algorithms, but also extend the concept of the Sources Diagram to Source/Sink types of process. This paper presents a background of WSD progress as well as insights into future perspectives using the Sources Diagrams’ concept.
Application of the Cooling Water Sources Diagram method compared to the mathematical optimization method 23rd International Congress of Chemical and Process Engineering Chisa 2018 and 21st Conference on Process Integration Modelling and Optimisation for Energy Saving and Pollution Reduction Pres 2018, 2018
Carbon sources diagram -A tool for carbon-constrained energy sector planning 21st International Congress of Chemical and Process Engineering Chisa 2014 and 17th Conference on Process Integration Modelling and Optimisation for Energy Saving and Pollution Reduction Pres 2014, 2014
Synthesis of distributed wastewater treatment networks in a petroleum refinery using wastewater source diagram (WWSD) 21st International Congress of Chemical and Process Engineering Chisa 2014 and 17th Conference on Process Integration Modelling and Optimisation for Energy Saving and Pollution Reduction Pres 2014, 2014
Management of water consumption in pulp and paper industry -A case study using water sources diagram 21st International Congress of Chemical and Process Engineering Chisa 2014 and 17th Conference on Process Integration Modelling and Optimisation for Energy Saving and Pollution Reduction Pres 2014, 2014
Thermohydraulic optimization of crude preheat trains 19th International Congress of Chemical and Process Engineering Chisa 2010 and 7th European Congress of Chemical Engineering Ecce 7, 2010
Extraction and Distillation Fernando L. P. Pessoa, Marisa F. Mendes, Eduardo M. Queiroz, Silvio A. B. Vieira De Melo Handbook of Fruit and Vegetable Flavors, 2010
Fouling mitigation through optimization of heat exchanger cleaning schedules ECOS 2009 22nd International Conference on Efficiency Cost Optimization Simulation and Environmental Impact of Energy Systems, 2009
Water source diagram procedure: Wastewater reduction for single contaminant Chisa 2006 17th International Congress of Chemical and Process Engineering, 2006
Application of Water Source Diagram (WSD) procedure in the pulp and paper industry Chisa 2006 17th International Congress of Chemical and Process Engineering, 2006
