Jose Julian Montes-Rodriguez

@cidesi.com

Project Engineer. Energy Department, Emerging Technologies Division
Centro de Ingenieria y Desarrollo Industrial

Jose Julian Montes-Rodriguez


                     Download Compact PDF  
https://researchid.co/julianiiim
Chemical Metallurgical Engineer with Master's and Doctoral degrees in Metallurgical Engineering. He holds certifications as an International Welding Engineer from the International Institute of Welding, a Certified Welding Inspector from the American Welding Society, and an API-570 Inspector from the American Petroleum Institute. He has directed and co-directed undergraduate, master's, and doctoral theses, published scientific articles in indexed journals, and presented papers at conferences in Mexico and abroad. He is a Level I member of the National System of Researchers (SNII) of the SECIHTI.

EDUCATION

Chemical Metallurgy Bachelor
M.Sc. in Metallurgical Engineering
Ph.D. in Metallurgical and Ceramic Engineering

RESEARCH, TEACHING, or OTHER INTERESTS

Fluid Flow and Transfer Processes, Metals and Alloys, Engineering, Materials Science
11

Scopus Publications

121

Scholar Citations

5

Scholar h-index

5

Scholar i10-index

Scopus Publications

  • Particulate filtration by cryogenic condensation using a high efficiency Stairmand cyclone separator
    O. Rubio-López, J.J. Montes-Rodríguez, E. Rodríguez-Morales, L.A. Montoya-Santiyanes
    Separation and Purification Technology, 2024
  • E ect of complexing/bu ering agent on the characteristics of a high phosphorous electroless nickel coating
    J.I. Ruiz-Vela, , E.E. Rodríguez-Vázquez, Y. Gudiño-Pérez, R. Sánchez-Ramírez, J.J. Montes-Rodríguez
    Revista Mexicana De Ingeniera Quimica, 2023
    Derivation and application of
  • Experimental study of influence of internal heat exchanger in a chest freezer using r-513a as replacement of r-134a
    V. Pérez-García, D. Méndez-Méndez, J.M. Belman-Flores, J.L. Rodríguez-Muñoz, J.J. Montes-Rodríguez, J.J. Ramírez-Minguela
    Applied Thermal Engineering, 2022
  • Study of fluid dynamics and sulfur mass transfer between steel and slag in a ladle furnace considering drag and non-drag forces
    Antonio Urióstegui Hernández, PEDRO GARNICA GONZALEZ, CONSTANTIN ALBERTO HERNANDEZ BOCANEGRA, JOSE ANGEL RAMOS BANDERAS, JOSE JULIAN MONTES RODRIGUEZ, JOSE RAUL ORTIZ CASTILLO
    Dyna Spain, 2022
    In this work fluid dynamics and a basic study of the sulfur transfer at the steel/slag interface in the ladle during argon gas agitation was developed. Mass transfer and chemical reaction models coupled with Computational Fluid Dynamics (CFD) were employed. The multiphasic simulation was solved using the Eulerian model considering drag and non-drag forces, and the flow pattern was validated through Particle Image Velocimetry (PIV) technique. The sulfur transfer rate was tracked by two approximations: (1) unidirectional constant rate Mass Transfer Model (MTM), and (2) unidirectional constant rate Mass Transfer Model coupled with Chemical Reaction Model (MTM+CRM) using Arrhenius equation. It was found that including the non-drag forces affects the fluid dynamics structure. Otherwise, the desulfurization rates increase as the argon gas flow rate increases, finding that the MTM model predicts ~15% less sulfur in the steel than the MTM+CRM, whose results were compared with plant measurements reports.
  • Analysis of Sloshing-Induced Stresses in the Baffles-Shell Joints in a Road Tanker Transporting LPG
    J. J. Hernández-Morales, E. Rodríguez-Morales, J. L. Bautista-Jacobo, J. J. Montes-Rodríguez
    Iranian Journal of Science and Technology Transactions of Mechanical Engineering, 2021
  • Effect of the location of tracer addition in a ladle on the mixing time through physical and numerical modeling
    Mario Herrera-Ortega, José Ángel Ramos-Banderas, Constantin Alberto Hernández-Bocanegra, José Julián Montes-Rodríguez
    ISIJ International, 2021
    In the present work, the release of tracer location on the global mixing time in an agitated ladle furnace by gas bottom injection was analyzed. Then, a numerical multiphasic steel-slag-argon-air system of a prototype with a capacity of 150 tons was carried out. The simulation was validated by using a physical model with a 1/6 geometric scale using colorant, KCl dispersion measurements techniques and open slag eye opening. Four different tracer addition locations were strategically established to study the influence of tracer releasing location on chemical homogenization. From the results, it was found that the measurement of mixing times varies according to the location of the tracer addition, which to a greater extent is conditioned by the convective currents that at some extent were related to turbulent viscosity.
  • Effect of cold metal transfer and gas tungsten arc welding processes on the metallurgical and mechanical properties of Inconel® 625 weldings
    J. I. Ruiz-Vela, J. J. Montes-Rodríguez, E. Rodríguez-Morales, J. A. Toscano-Giles
    Welding in the World, 2019
  • Numerical study of carburizing and quenching thermochemical treatment of a drive shaft employing experiment design
    Revista Mexicana De Ingeniera Quimica, 2015
  • Effect of Baffles on the Sloshing in Road Tankers Carrying LPG: A Comparative Numerical Study
    J. L. Bautista-Jacobo, E. Rodríguez-Morales, J. J. Montes-Rodríguez, H. Gámez-Cuatzín
    Mathematical Problems in Engineering, 2015
    This work presents a comparative numerical study of the effect of using baffles, and its design, on the behavior of sloshing in a partially filled road tanker carrying LPG. Navier-Stokes equations and standardk-εturbulence model are used to simulate fluid movement; the Volume of Fluid (VOF) method is used to track the liquid-gas interface. Velocity distributions, sloshing stabilization times, and contours of turbulent kinetic energy, which are of high importance in choosing the best design of baffles, are shown. The results show sloshing stabilization times of 22 and 21 s for road tankers with cross-shaped (Type I) and X-shaped (Type II) baffles, respectively, finding lower values of turbulent kinetic energy for Type II design, being, therefore, the best design of baffles for damping of sloshing and vehicle control among studied ones.
  • Effect of the operating conditions of air-mist nozzles on the thermal evolution of continuosly cast thin slabs
    J.J. MONTES R., A.H. CASTILLEJOS E., F.A. ACOSTA G., E.P. GUTIÉRREZ M., M.A. HERRERA G.
    Canadian Metallurgical Quarterly, 2008
    AbstractAbstractCommonly. the secondary cooling provided by air-mist nozzles is regulated by varying the water flow rate while maintaining constant air nozzle pressure. However, these cooling elements are more flexible since, as demonstrated in laboratory experiments, an increase in the air pressure, particularly from a typical value of 200 kPa to 250-400 kPa, causes a considerable increase in the boiling heat flux for a given impact water flux. Based on this finding, previous empirical correlations for the heat flux generated by air-mist nozzles impinging on hot surfaces were extended to include the effect of the air pressure. The correlations were then implemented into a transient 2-D heat conduction model to investigate the influence of new cooling conditions on the surface temperature and metallurgical length of the strand and ultimately on the possibility of increasing the casting speed, i.e., productivity. The model highlighted the potential of the new conditions and this was confirmed by plant results. Additional support to the usefulness of the correlations emerged from the accurate predictions that the model can achieve regarding the temperature evolution of the strand during transient operating conditions, such as during changes in casting speed, slab width, casting temperature and/or steel grade. The fact that the correlations did not need calibration emphasizes the importance of the appropriate characterization of spray and air-mist cooling to develop robust, flexible and accurate virtual casting machines for exploring and controlling the operation of real ones.Ordinairement le refroidissement secondaire avec pulvérisateur pneumatique est réglé en changeant le degré du flux d'eau mais en gardant l'atomiseur de pression d'air constant. Cependant ces refroidissements sont plus flexibles, comme démontrées dans les expériences de laboratoire, un accroissement dans la pression d'air, particulièrement de la valeur typique de 200 kPa a 250-400 kPa, produit un accroissement dans le flot de chaleur de l'ébullition pour un choc de flot d'eau donné. Basé dans ces découvertes, des corrélations empiriques pour le flux de chaleur généré par le pulvérisateur pneumatique qui entre en collision avec des surfaces chaudes étaient prolongées pour inclure l'effet de la pression d'air. Les corrélations étaient donc exécutées dans un model de conduction de chaleur transitoire 2-D pour étudier l'influence des conditions des nouveaux refroidissements sur la température de la surface et la longueur métallurgique du toron et finalement sur la possibilité d'augmenter la vitesse des brames coulées, i.e., productivité. Le modèle reflète le potentiel des nouvelles conditions et ceci a été confirmé dans les résultats sur l'industrie. Un appui additionnel de bonté pratique de corrélations surgit des prédictions exactes que le modèle peut exécuter de l'évolution de température du toron pendant les conditions transitoires d'opération ex. pendant le changement de la vitesse coulée, largeur des brames, la température des coulées et/ou le rang d'acier. Le fait que les corrélations n'ont pas eu besoin d'être calibrées, montre l'importance d'une caractérisation appropriée du refroidissement avec les atomiseurs d'eau pour développer des machines de coulée virtuelles, robustes, flexibles et précises. Ceci permettra explorer et contrôler l'opération en machines réelles.
  • Strontium effect on the solidification path of a 319-type aluminum alloy
    Institute of Cast Metals Engineers 67th World Foundry Congress Wfc06 Casting the Future, 2006

RECENT SCHOLAR PUBLICATIONS

  • Particulate filtration by cryogenic condensation using a high efficiency Stairmand cyclone separator
    O Rubio-López, JJ Montes-Rodríguez, E Rodríguez-Morales, ...
    Separation and Purification Technology 342, 126902 , 2024
    2024.0
    Citations: 4
  • Optimización de un intercambiador de calor tipo serpentín mediante un algoritmo genético
    RDC Tinajero, ER Morales, JJIIIM Rodríguez
    Investigación y Ciencia: de la Universidad Autónoma de Aguascalientes, 5 , 2024
    2024.0
  • Effect of complexing/buffering agent on the characteristics of a high phosphorous CO TD electroless nickel coating 32009/Vl8br 3
    JI Ruiz-Vela, EE Rodríguez-Vázquez, Y Gudiño-Pérez, ...
    Revista Mexicana de Ingeniería Química 22 (2) , 2023
    2023.0
    Citations: 2
  • Automated construction of aerodynamic profiles through evolutionary computing
    JLB Jacobo, HJ Hernandez, JJM Rodriguez, ER Morales, HG Cuatzin
    DYNA Ingenieria e Industria 97 (6), 578 , 2022
    2022.0
  • Experimental study of influence of internal heat exchanger in a chest freezer using r-513a as replacement of r-134a
    V Pérez-García, D Méndez-Méndez, JM Belman-Flores, ...
    Applied Thermal Engineering 204, 117969 , 2022
    2022.0
    Citations: 13
  • Estudio de la dinámica de fluidos y la transferencia másica de azufre entre el acero y la escoria en un hornocuchara considerando fuerzas de arrastre y no-arrastre.
    A Urióstegui-Hernández, P Garnica-González, CA Hernández-Bocanegra, ...
    DYNA-Ingeniería e Industria 97 (2) , 2022
    2022.0
  • Study of fluid dynamics and sulfar mass transfer between steel and slag in a ladle furnace considering drag and non-drag forces
    A Uriostegui-Hernandez, P Garnica-Gonzalez, CA Hernandez-Bocanegra, ...
    Dyna 97 (2), 176-183 , 2022
    2022.0
    Citations: 1
  • OPTIMUM ADJUSTMENT OF AIRFOILS TROUGH EVOLUTIONARY PROGRAMMING
    J Bautista-Jacobo, H Jiménez-Hernández, J Montes-Rodríguez, ...
    DYNA New Technologies Journal 9 (1) , 2022
    2022.0
  • Estudio de la dinámica de fluidos y la transferencia másica de azufre entre el acero y la escoria en un horno-cuchara considerando fuerzas de arrastre y no-arrastre
    AU Hernández, PG González, CAH Bocanegra, JAR Banderas, ...
    Revista DYNA 97 (2), 176-183 , 2022
    2022.0
  • Construcción automatizada de perfiles aerodinámicos mediante cómputo evolutivo
    J Bautista-Jacobo, H Jiménez-Hernández, J Montes-Rodríguez, ...
    DYNA 97 (6), 578-578 , 2022
    2022.0
  • Ajuste óptimo de perfiles aerodinámicos mediante programación evolutiva
    JLB JACOBO, HJ Hernández, JJM RODRIGUEZ, ER Morales, ...
    DYNA New Technologies 9 (1), [14P.]-[14P.] , 2022
    2022.0
    Citations: 1
  • Analysis of Sloshing-Induced Stresses in the Baffles-Shell Joints in a Road Tanker Transporting LPG
    JJ Hernández-Morales, E Rodríguez-Morales, JL Bautista-Jacobo, ...
    Iranian Journal of Science and Technology, Transactions of Mechanical … , 2021
    2021.0
  • Effect of the location of tracer addition in a ladle on the mixing time through physical and numerical modeling
    M Herrera-Ortega, JÁ Ramos-Banderas, CA Hernández-Bocanegra, ...
    ISIJ International 61 (8), 2185-2192 , 2021
    2021.0
    Citations: 24
  • Effect of cold metal transfer and gas tungsten arc welding processes on the metallurgical and mechanical properties of Inconel® 625 weldings
    JI Ruiz-Vela, JJ Montes-Rodríguez, E Rodríguez-Morales, ...
    Welding in the World 63 (2), 459-479 , 2019
    2019.0
    Citations: 31
  • Numerical study of carburizing and quenching thermochemical treatment of a drive shaft employing experiment design
    E Rodríguez-Morales, JJ Montes-Rodríguez, AG Luna-Bustamante, ...
    Revista mexicana de ingeniería química 14 (2), 405-413 , 2015
    2015.0
    Citations: 2
  • Estudio numérico del tratamiento termoquímico de carburizado y temple de una flecha de transmisión empleando diseño de experimentos
    E Rodríguez-Morales, JJ Montes-Rodríguez, AG Luna-Bustamante, ...
    Revista mexicana de ingeniería química 14 (2), 405-413 , 2015
    2015.0
  • Effect of baffles on the sloshing in road tankers carrying LPG: a comparative numerical study
    JL Bautista-Jacobo, E Rodríguez-Morales, JJ Montes-Rodríguez, ...
    Mathematical Problems in Engineering 2015 (1), 359470 , 2015
    2015.0
    Citations: 23
  • Effect of the operating conditions of air-mist nozzles on the thermal evolution of continuously cast thin slabs
    JJ Montes, AH Castillejos, FA Acosta, EP Gutiérrez, MA Herrera
    Canadian Metallurgical Quarterly 47 (2), 187-204 , 2008
    2008.0
    Citations: 19
  • Strontium Effect on the Solidification Path of a 319 Type Aluminum Alloy
    M Castro-Roman, JJ Montes-Rodriguez, M Herrera-Trejo
    World Foundry Congress, 4-7 , 2006
    2006.0
    Citations: 1
  • ESTUDIO DE LA DINÁMICA DE FLUIDOS Y LA TRANSFERENCIA MÁSICA DE AZUFRE ENTRE EL ACERO Y LA ESCORIA EN UN HORNO OLLA CONSIDERANDO FUERZAS DE ARRASTRE Y NO-ARRASTRE.
    JÁRB Hernández-Bocanegra, JJ Montes-Rodríguez, JR Ortiz-Castillo

MOST CITED SCHOLAR PUBLICATIONS

  • Effect of cold metal transfer and gas tungsten arc welding processes on the metallurgical and mechanical properties of Inconel® 625 weldings
    JI Ruiz-Vela, JJ Montes-Rodríguez, E Rodríguez-Morales, ...
    Welding in the World 63 (2), 459-479 , 2019
    2019.0
    Citations: 31
  • Effect of the location of tracer addition in a ladle on the mixing time through physical and numerical modeling
    M Herrera-Ortega, JÁ Ramos-Banderas, CA Hernández-Bocanegra, ...
    ISIJ International 61 (8), 2185-2192 , 2021
    2021.0
    Citations: 24
  • Effect of baffles on the sloshing in road tankers carrying LPG: a comparative numerical study
    JL Bautista-Jacobo, E Rodríguez-Morales, JJ Montes-Rodríguez, ...
    Mathematical Problems in Engineering 2015 (1), 359470 , 2015
    2015.0
    Citations: 23
  • Effect of the operating conditions of air-mist nozzles on the thermal evolution of continuously cast thin slabs
    JJ Montes, AH Castillejos, FA Acosta, EP Gutiérrez, MA Herrera
    Canadian Metallurgical Quarterly 47 (2), 187-204 , 2008
    2008.0
    Citations: 19
  • Experimental study of influence of internal heat exchanger in a chest freezer using r-513a as replacement of r-134a
    V Pérez-García, D Méndez-Méndez, JM Belman-Flores, ...
    Applied Thermal Engineering 204, 117969 , 2022
    2022.0
    Citations: 13
  • Particulate filtration by cryogenic condensation using a high efficiency Stairmand cyclone separator
    O Rubio-López, JJ Montes-Rodríguez, E Rodríguez-Morales, ...
    Separation and Purification Technology 342, 126902 , 2024
    2024.0
    Citations: 4
  • Effect of complexing/buffering agent on the characteristics of a high phosphorous CO TD electroless nickel coating 32009/Vl8br 3
    JI Ruiz-Vela, EE Rodríguez-Vázquez, Y Gudiño-Pérez, ...
    Revista Mexicana de Ingeniería Química 22 (2) , 2023
    2023.0
    Citations: 2
  • Numerical study of carburizing and quenching thermochemical treatment of a drive shaft employing experiment design
    E Rodríguez-Morales, JJ Montes-Rodríguez, AG Luna-Bustamante, ...
    Revista mexicana de ingeniería química 14 (2), 405-413 , 2015
    2015.0
    Citations: 2
  • Study of fluid dynamics and sulfar mass transfer between steel and slag in a ladle furnace considering drag and non-drag forces
    A Uriostegui-Hernandez, P Garnica-Gonzalez, CA Hernandez-Bocanegra, ...
    Dyna 97 (2), 176-183 , 2022
    2022.0
    Citations: 1
  • Ajuste óptimo de perfiles aerodinámicos mediante programación evolutiva
    JLB JACOBO, HJ Hernández, JJM RODRIGUEZ, ER Morales, ...
    DYNA New Technologies 9 (1), [14P.]-[14P.] , 2022
    2022.0
    Citations: 1
  • Strontium Effect on the Solidification Path of a 319 Type Aluminum Alloy
    M Castro-Roman, JJ Montes-Rodriguez, M Herrera-Trejo
    World Foundry Congress, 4-7 , 2006
    2006.0
    Citations: 1
  • Optimización de un intercambiador de calor tipo serpentín mediante un algoritmo genético
    RDC Tinajero, ER Morales, JJIIIM Rodríguez
    Investigación y Ciencia: de la Universidad Autónoma de Aguascalientes, 5 , 2024
    2024.0
  • Automated construction of aerodynamic profiles through evolutionary computing
    JLB Jacobo, HJ Hernandez, JJM Rodriguez, ER Morales, HG Cuatzin
    DYNA Ingenieria e Industria 97 (6), 578 , 2022
    2022.0
  • Estudio de la dinámica de fluidos y la transferencia másica de azufre entre el acero y la escoria en un hornocuchara considerando fuerzas de arrastre y no-arrastre.
    A Urióstegui-Hernández, P Garnica-González, CA Hernández-Bocanegra, ...
    DYNA-Ingeniería e Industria 97 (2) , 2022
    2022.0
  • OPTIMUM ADJUSTMENT OF AIRFOILS TROUGH EVOLUTIONARY PROGRAMMING
    J Bautista-Jacobo, H Jiménez-Hernández, J Montes-Rodríguez, ...
    DYNA New Technologies Journal 9 (1) , 2022
    2022.0
  • Estudio de la dinámica de fluidos y la transferencia másica de azufre entre el acero y la escoria en un horno-cuchara considerando fuerzas de arrastre y no-arrastre
    AU Hernández, PG González, CAH Bocanegra, JAR Banderas, ...
    Revista DYNA 97 (2), 176-183 , 2022
    2022.0
  • Construcción automatizada de perfiles aerodinámicos mediante cómputo evolutivo
    J Bautista-Jacobo, H Jiménez-Hernández, J Montes-Rodríguez, ...
    DYNA 97 (6), 578-578 , 2022
    2022.0
  • Analysis of Sloshing-Induced Stresses in the Baffles-Shell Joints in a Road Tanker Transporting LPG
    JJ Hernández-Morales, E Rodríguez-Morales, JL Bautista-Jacobo, ...
    Iranian Journal of Science and Technology, Transactions of Mechanical … , 2021
    2021.0
  • Estudio numérico del tratamiento termoquímico de carburizado y temple de una flecha de transmisión empleando diseño de experimentos
    E Rodríguez-Morales, JJ Montes-Rodríguez, AG Luna-Bustamante, ...
    Revista mexicana de ingeniería química 14 (2), 405-413 , 2015
    2015.0
  • ESTUDIO DE LA DINÁMICA DE FLUIDOS Y LA TRANSFERENCIA MÁSICA DE AZUFRE ENTRE EL ACERO Y LA ESCORIA EN UN HORNO OLLA CONSIDERANDO FUERZAS DE ARRASTRE Y NO-ARRASTRE.
    JÁRB Hernández-Bocanegra, JJ Montes-Rodríguez, JR Ortiz-Castillo