KARTHI N

Scopus Publications

Hybridization in Hybridization in Metal Additive Manufacturing: Current Status and Future Prospectives
Ajithkumar Sitharaj, B. Arulmurugan, N. Karthi, M. S. Dhanushh, S. R. Deepak, M. Ajay
Lecture Notes in Mechanical Engineering, 2025
Analysis of Brake Performance of an All-Terrain Vehiclesby Simulation and Experimental Techniques
V. Amarnath, N. Karthi, Yogesh Kumar, Samson Akash, L. Rajeshkumar
Aip Conference Proceedings, 2023
Synthesis and Characterization of Jute and Banana Fiber Reinforced Polyester Composites
N. Karthi, S. Sathish, S. Gokulkumar, R. Gokulnath, T. Aravinth, G. Govindaraj
Nanoworld Journal, 2023
The superior inherent properties like low density, lower consumption of energy and low cost, when compared with synthetic fibers, some of the widely used natural fibers utilized for manufacturing composites include banana, hemp, jute, sisal, coir
Development and Characterization of Glycine Max Seed Powder Blended with Unidirectional Agave Fourcroydes Reinforced Epoxy Nanocomposite
S. Gokulkumar, T. Kannan, N. Karthi, S. Sathish, L. Prabhu, M. Aravindh, J. Alex
Springer Proceedings in Materials, 2023
Acoustical behavior of camellia sinensis/ananas comosus fiber based uni-directional corrugated panel for sound damping application
N Karthi, S Gokulkumar, S Sathish, U S Rajkumar
Materials Research Express, 2022
To achieve a durable, rigid, and lightweight construction material, a new class of Camellia sinensis/Ananas comosus fiber-enhanced corrugated sandwich panel was designed and produced. The crushed core layer comprises sinusoidal corrugation and is manufactured by a method of mould pressing in an attempt to assess this material’s sound absorption ability. In addition, the influence of airgap and micro perforation on sound absorption properties was investigated. The samples with a greater perforation ratio and air gap are found to have a noise reduction coefficient (NRC) of 0.745, which can be used to attenuate mid- and high-range frequencies in industrial environments.
Tribological and Thermo-Mechanical Performance of Chemically Modified Musa Acuminata / Corchorus Capsularis Reinforced Hybrid Composites
N Karthi, K Kumaresan, G Rajeshkumar, S Gokulkumar, S Sathish
Journal of Natural Fibers, 2022
This paper explores the tribological efficiency of Musa acuminata (B – Banana)/Corchorus capsularis (J – Jute) fibers reinforced epoxy-based tribo-composites which was fabricated by varying the content of these fibers (MC1 – 15 wt.% of Banana and 15 wt.% of Jute, MC2 – 20 wt.% of Banana and 20 wt.% of Jute and MC3 – 25 wt.% of Banana and 25 wt.% of Jute) by means of the compression molding method. The pin-on-disk dry wear check was carried out by varying the load conditions (20, 40 and 60 N) and sliding distance (602.88, 1205.76 and 1808.64 m). The experimental outcomes disclosed that the hybrid composites have superior properties than the single fiber-reinforced composites. Moreover, the Scanning Electron Microscopy (SEM) was used to analyze the damaged surfaces of the samples.
Design of Control Mechanisms for Electrical Groups based on IoT Technology, for Monitoring Operating Parameters
Raghul. K. S, Boopathiraja. K. P, Sudarvannan. V, Sowndharya S, Karthi N, Dhiyaneswaran J
Proceedings of the International Conference on Electronics and Renewable Systems Icears 2022, 2022
In the development of technologies, over time, the industry has adopted new paradigms, the IoT is not the exception, and thanks to the development of electronic components, sensors and actuators with the ability to measure multiple physical parameters can be found. Mechanics, among others, in this work a methodology is developed to be able to evaluate the work and operation of the most well-known power generators such as power generation sub stations, in the methodology a mechanism is presented to control the operating parameters of the sub-stations based on the PIC24FJ128GA705 microcontroller, which works with the MQTT protocols for data capture, web services based on the HTTP protocol as an application server and client, the results of the methodology allow evaluating remotely and in time actual operating parameters such as operating time, temperature, fuel level, c output current, output voltage among others.
Extraction, Treatment and Applications of Bio Fiber Composites A Critical Review
S. Sathish, L. Prabhu, S. Gokulkumar, N. Karthi, D. Balaji, N. Vigneshkumar
Composite and Composite Coatings Mechanical and Tribology Aspects, 2022
Sustainable and eco-friendly products are gaining more attention in various engineering industries owing to their considerable strength-to-weight ratio, abundant availability and recyclability. The properties of bio fibers depend on the cultivation method, environmental conditions and extraction method. Bio fibers are extracted by dew retting, water retting and mechanical decortication. The properties of natural fiber–reinforced composites can be enhanced by proper chemical treatments. The intent of this assessment is to propose a complete evaluation of the different extraction methods, methods of treating fiber using chemicals and industrial applications of natural fiber–reinforced composites. Key findings from various existing data and the chemical treatment consequences of the bio fiber–reinforced composite properties are specifically highlighted with critical assessment.
Physical and Mechanical Properties of Randomly Oriented Natural Fiber Hybrid Composites for Exterior Applications
N. Karthi, D. Balaji, N. Vignesh Kumar, L. Feroz Ali, D. Abilash, S. Akash, G. Gajendran
Materials Science Forum, 2022
Researchers are envisaging in the replacement of the metal and its alloys with natural materials for its superior availability and inferior cost. Although the natural fibers are available in abundant, the issue is their strength and thermal property which are considerably lower than conventional materials. This inferior property lieu put aside of using it for many applications. In order to overcome that the natural materials are hybridized to obtain the combined properties of individual materials. In the current work, natural fibers like hemp, banana and bamboo fibers were reinforced in epoxy resin and their mechanical and water absorption properties were evaluated. Main application considered now are in external casing for many devices like motors, generators and so on wherein the material should capable to work with the moisture along with mechanical strength. The material is developed specifically for this external application with relevant test like absorption of moisture and mechanical tests. It could be noted from the results that a tensile strength, flexural strength, impact strength and inter-laminar shear strength of 35.51 MPa, 96.99 MPa, 4.86 J and 3.6 MPa respectively has been obtained for sample with 30 % hemp fibers. Alongside, minimum voids and water absorption were obtained for the same composite configuration. These test reveals that these variants could effectively replaces the external metal casing in harsh environment
Retraction: Vehicle Speed Control and Accident Prevention System in Smog Zone
M Kathirvelu, A C Nithia shree, M Manasa, L Naveen, N Karthi
Journal of Physics Conference Series, 2021
The air quality index (AQI) is a proportion of what air contamination means for one’s wellbeing inside a brief timeframe. The higher the AQI esteem, the more noteworthy the degree of air contamination. In a smog zone, the air pollutants can be detected with an air quality detector that will provide information about invisible toxic pollutant matters present in the air. This paper is concentrated on vehicle collision avoidance in smog places. For instance in the road, the driver suffers from unclear vision because PM (Particulate Matter) enters his/her eyes which leads to vehicle collision. A vehicle collision avoidance system with a microcontroller and onboard sensors in the smog zone is developed. It mainly focuses on the digital driver-vehicle interface implementation by using CAN protocol. The framework of CAN lessens wiring by and large. In this system, information like humidity, temperature, and distance is obtained. The humidity module measures both the temperature and humidity content and an the ultrasonic sensor is adjusted to gauge the distance between the object and vehicle, if a hindrance is identified inside 300cm from the vehicle, the alarm gives a signal to the driver. Once an individual vehicle enters the smog zone, it lowers the speed.
Extraction, Treatment and Applications of Natural Fibers for Bio-Composites - A Critical Review
S. Sathish, L. Prabhu, S. Gokulkumar, N. Karthi, D. Balaji, N. Vigneshkumar
International Polymer Processing, 2021
Acoustical Analysis and Drilling Process Optimization of Camellia Sinensis / Ananas Comosus / GFRP / Epoxy Composites by TOPSIS for Indoor Applications
S. Gokulkumar, P.R. Thyla, R. ArunRamnath, N. Karthi
Journal of Natural Fibers, 2021
A review of natural fiber composites: Extraction methods, chemical treatments and applications
S. Sathish, N. Karthi, L. Prabhu, S. Gokulkumar, D. Balaji, N. Vigneshkumar, T.S. Ajeem Farhan, A. AkilKumar, V.P. Dinesh
Materials Today Proceedings, 2021
A review on natural fiber reinforced hybrid composites: Chemical treatments, manufacturing methods and potential applications
L. Prabhu, V. Krishnaraj, S. Sathish, S. Gokulkumar, N. Karthi, L. Rajeshkumar, D. Balaji, N. Vigneshkumar, K.S. Elango
Materials Today Proceedings, 2021
Acoustical and mechanical optimization of Camellia Sinensis/Ananas Comosus/GFRP/Epoxy composites by TOPSIS & Weighted Aggregates Sum Product Assessment method
S. Gokulkumar, P.R. Thyla, S. Sathish, N. Karthi, L. Prabhu, P. Vignesh, R. Vishnu, K. Srikanth, S. Vishnu Prasath
Materials Today Proceedings, 2021
Effect of weight fraction on the mechanical properties of flax and jute fibers reinforced epoxy hybrid composites
N. Karthi, K. Kumaresan, S. Sathish, L. Prabhu, S. Gokulkumar, D. Balaji, N. Vigneshkumar, S. Rohinth, S. Rafiq, S. Muniyaraj, S. Pavithran
Materials Today Proceedings, 2021
Experimental investigation on mechanical properties of flax/banana/ industrial waste tea leaf fiber reinforced hybrid polymer composites
L. Prabhu, V. Krishnaraj, S. Sathish, S. Gokulkumar, N. Karthi, L. Rajeshkumar, D. Balaji, N. Vigneshkumar, K.S. Elango, J. Karpagam, V.J. Vijayalakshmi, E.R. Gowarthan, Harry Jayakumar
Materials Today Proceedings, 2021
Wear performance and Mechanical properties of Unidirectional Sisal/Carbon/Flax Hybrid Reinforced Epoxy Composites
R Anand Kumar, S SS Sindhu, M Kumaresan, S Sathish, N Karthi, J Vignesh, S P Sidharth, K V Shreedhar, P Subash Rajasekar
Iop Conference Series Materials Science and Engineering, 2020
Study of mechanical and morphological properties of jute-tea leaf fiber reinforced hybrid composites: Effect of glass fiber hybridization
L. Prabhu, V. Krishnaraj, S. Sathish, S. GokulKumar, N. Karthi
Materials Today Proceedings, 2019
A comparative study on epoxy based composites filled with pineapple/areca/ramie hybridized with industrial tea leaf wastes/GFRP
S. Gokulkumar, P.R. Thyla, L. Prabhu, S. Sathish, N. Karthi
Materials Today Proceedings, 2019
An overview: Natural fiber reinforced hybrid composites, chemical treatments and application areas
N. Karthi, K. Kumaresan, S. Sathish, S. Gokulkumar, L. Prabhu, N. Vigneshkumar
Materials Today Proceedings, 2019
Experimental investigation of mechanical and morphological properties of flax fiber reinforced epoxy composites incorporating SiC and Al2O3
S. Sathish, K. Kumaresan, L. Prabhu, S. Gokulkumar, N. Karthi, N. Vigneshkumar
Materials Today Proceedings, 2019
Effect of fiber orientation on mechanical properties of sisal fiber reinforced epoxy composites
M. Kumaresan, S. Sathish, N. Karthi
Journal of Applied Science and Engineering, 2015

RECENT SCHOLAR PUBLICATIONS

Hybridization in Metal Additive Manufacturing: Current Status and Future Prospectives
A Sitharaj, B Arulmurugan, N Karthi, MS Dhanushh, SR Deepak, M Ajay
International Conference on Additive Manufacturing, 467-482 , 2024
2024
Citations: 2
Correction to: Hybridization in Metal Additive Manufacturing: Current Status and Future Prospectives
A Sitharaj, B Arulmurugan, N Karthi, MS Dhanushh, SR Deepak, M Ajay
International Conference on Additive Manufacturing, C1-C1 , 2024
2024
Analysis of brake performance of an all-terrain vehicles by simulation and experimental techniques
V Amarnath, N Karthi, Y Kumar, S Akash, L Rajeshkumar
AIP Conference Proceedings 2901 (1), 100034 , 2023
2023
Coating of natural fiber composite envisaging through the patent landscape: An overview
K Natarajan, K Krishnasamy, B Devarajan
Journal of Applied Polymer Science 140 (17), e53783 , 2023
2023
Citations: 11
Development and Characterization of Glycine Max Seed Powder Blended with Unidirectional Agave Fourcroydes Reinforced Epoxy Nanocomposite
S Gokulkumar, T Kannan, N Karthi, S Sathish, L Prabhu, M Aravindh, ...
International Symposium on Lightweight and Sustainable Polymeric Materials … , 2023
2023
Tribological and thermo-mechanical performance of chemically modified musa acuminata/corchorus capsularis reinforced hybrid composites
N Karthi, K Kumaresan, G Rajeshkumar, S Gokulkumar, S Sathish
Journal of Natural Fibers 19 (12), 4640-4653 , 2022
2022
Citations: 31
Acoustical behavior of camellia sinensis/ananas comosus fiber based uni-directional corrugated panel for sound damping application
N Karthi, S Gokulkumar, S Sathish, US Rajkumar
Materials Research Express 9 (12), 125309 , 2022
2022
Citations: 3
Physical and Mechanical Properties of Randomly Oriented Natural Fiber Hybrid Composites for Exterior Applications
N Karthi, D Balaji, N Vignesh Kumar, L Feroz Ali, D Abilash, S Akash, ...
Materials Science Forum 1070, 89-102 , 2022
2022
1 Extraction, and Applications Treatment of Bio Fiber Composites
S Sathish, L Prabhu, S Gokulkumar, N Karthi, D Balaji, N Vigneshkumar
Composite and Composite Coatings: Mechanical and Tribology Aspects, 1 , 2022
2022
Extraction, Treatment and Applications of Bio Fiber CompositesA Critical Review
S Sathish, L Prabhu, S Gokulkumar, N Karthi, D Balaji, N Vigneshkumar
Composite and Composite Coatings, 1-22 , 2022
2022
Citations: 3
Acoustical analysis and drilling process optimization of camellia sinensis/ananas comosus/GFRP/epoxy composites by TOPSIS for indoor applications
S Gokulkumar, PR Thyla, R ArunRamnath, N Karthi
Journal of Natural Fibers 18 (12), 2284-2301 , 2021
2021
Citations: 61
Extraction, treatment and applications of natural fibers for bio-composites–a critical review
S Sathish, L Prabhu, S Gokulkumar, N Karthi, D Balaji, N Vigneshkumar
International Polymer Processing 36 (2), 114-130 , 2021
2021
Citations: 59
Experimental investigation on mechanical properties of flax/banana/industrial waste tea leaf fiber reinforced hybrid polymer composites
L Prabhu, V Krishnaraj, S Sathish, S Gokulkumar, N Karthi, ...
Materials Today: Proceedings 45, 8136-8143 , 2021
2021
Citations: 28
A review on natural fiber reinforced hybrid composites: chemical treatments, manufacturing methods and potential applications
L Prabhu, V Krishnaraj, S Sathish, S Gokulkumar, N Karthi, ...
Materials Today: Proceedings 45, 8080-8085 , 2021
2021
Citations: 99
Effect of weight fraction on the mechanical properties of flax and jute fibers reinforced epoxy hybrid composites
N Karthi, K Kumaresan, S Sathish, L Prabhu, S Gokulkumar, D Balaji, ...
Materials Today: Proceedings 45, 8006-8010 , 2021
2021
Citations: 41
Acoustical and mechanical optimization of camellia sinensis/ananas comosus/GFRP/epoxy composites by TOPSIS & weighted aggregates sum product assessment method
S Gokulkumar, PR Thyla, S Sathish, N Karthi, L Prabhu, P Vignesh, ...
Materials Today: Proceedings 45, 7980-7985 , 2021
2021
Citations: 11
A review of natural fiber composites: Extraction methods, chemical treatments and applications
S Sathish, N Karthi, L Prabhu, S Gokulkumar, D Balaji, N Vigneshkumar, ...
Materials Today: Proceedings 45, 8017-8023 , 2021
2021
Citations: 177
Wear performance and mechanical properties of unidirectional sisal/carbon/flax hybrid reinforced epoxy composites
R Anand Kumar, SSS Sindhu, M Kumaresan, S Sathish, N Karthi, ...
IOP conference series: materials science and engineering 988 (1), 012010 , 2020
2020
Citations: 7
An overview: Natural fiber reinforced hybrid composites, chemical treatments and application areas
N Karthi, K Kumaresan, S Sathish, S Gokulkumar, L Prabhu, ...
Materials today: proceedings 27, 2828-2834 , 2020
2020
Citations: 322
A comparative study on epoxy based composites filled with pineapple/areca/ramie hybridized with industrial tea leaf wastes/GFRP
S Gokulkumar, PR Thyla, L Prabhu, S Sathish, N Karthi
Materials Today: Proceedings 27, 2474-2476 , 2020
2020
Citations: 39

MOST CITED SCHOLAR PUBLICATIONS

An overview: Natural fiber reinforced hybrid composites, chemical treatments and application areas
N Karthi, K Kumaresan, S Sathish, S Gokulkumar, L Prabhu, ...
Materials today: proceedings 27, 2828-2834 , 2020
2020
Citations: 322
A review of natural fiber composites: Extraction methods, chemical treatments and applications
S Sathish, N Karthi, L Prabhu, S Gokulkumar, D Balaji, N Vigneshkumar, ...
Materials Today: Proceedings 45, 8017-8023 , 2021
2021
Citations: 177
Effect of fiber orientation on mechanical properties of sisal fiber reinforced epoxy composites
M Kumaresan, S Sathish, N Karthi
Journal of Applied Science and Engineering 18 (3), 289-294 , 2015
2015
Citations: 121
A review on natural fiber reinforced hybrid composites: chemical treatments, manufacturing methods and potential applications
L Prabhu, V Krishnaraj, S Sathish, S Gokulkumar, N Karthi, ...
Materials Today: Proceedings 45, 8080-8085 , 2021
2021
Citations: 99
Study of mechanical and morphological properties of jute-tea leaf fiber reinforced hybrid composites: effect of glass fiber hybridization
L Prabhu, V Krishnaraj, S Sathish, S GokulKumar, N Karthi
Materials Today: Proceedings 27, 2372-2375 , 2020
2020
Citations: 73
Acoustical analysis and drilling process optimization of camellia sinensis/ananas comosus/GFRP/epoxy composites by TOPSIS for indoor applications
S Gokulkumar, PR Thyla, R ArunRamnath, N Karthi
Journal of Natural Fibers 18 (12), 2284-2301 , 2021
2021
Citations: 61
Experimental investigation of mechanical and morphological properties of flax fiber reinforced epoxy composites incorporating SiC and Al2O3
S Sathish, K Kumaresan, L Prabhu, S Gokulkumar, N Karthi, ...
Materials Today: Proceedings 27, 2249-2253 , 2020
2020
Citations: 60
Extraction, treatment and applications of natural fibers for bio-composites–a critical review
S Sathish, L Prabhu, S Gokulkumar, N Karthi, D Balaji, N Vigneshkumar
International Polymer Processing 36 (2), 114-130 , 2021
2021
Citations: 59
Effect of weight fraction on the mechanical properties of flax and jute fibers reinforced epoxy hybrid composites
N Karthi, K Kumaresan, S Sathish, L Prabhu, S Gokulkumar, D Balaji, ...
Materials Today: Proceedings 45, 8006-8010 , 2021
2021
Citations: 41
A comparative study on epoxy based composites filled with pineapple/areca/ramie hybridized with industrial tea leaf wastes/GFRP
S Gokulkumar, PR Thyla, L Prabhu, S Sathish, N Karthi
Materials Today: Proceedings 27, 2474-2476 , 2020
2020
Citations: 39
EXPERIMENTAL TESTING ON MECHANICAL PROPERTIES OF VARIOUS NATURAL FIBERS REINFORCED EPOXY HYBRID COMPOSITES
NK S.Sathish, K.Kumaresan, L.Prabhu, S.Gokulkumar, S.Dinesh
Indian Journal of Science and Technology 11 (25), 1-6 , 2018
2018
Citations: 34
Tribological and thermo-mechanical performance of chemically modified musa acuminata/corchorus capsularis reinforced hybrid composites
N Karthi, K Kumaresan, G Rajeshkumar, S Gokulkumar, S Sathish
Journal of Natural Fibers 19 (12), 4640-4653 , 2022
2022
Citations: 31
Experimental investigation on mechanical properties of flax/banana/industrial waste tea leaf fiber reinforced hybrid polymer composites
L Prabhu, V Krishnaraj, S Sathish, S Gokulkumar, N Karthi, ...
Materials Today: Proceedings 45, 8136-8143 , 2021
2021
Citations: 28
Tensile and impact properties of natural fiber hybrid composite materials
S Sathish, M Kumaresan, N Karthi, TD Kumar
International Journal of Modern Engineering Research 4 (9), 9-12 , 2014
2014
Citations: 15
Coating of natural fiber composite envisaging through the patent landscape: An overview
K Natarajan, K Krishnasamy, B Devarajan
Journal of Applied Polymer Science 140 (17), e53783 , 2023
2023
Citations: 11
Acoustical and mechanical optimization of camellia sinensis/ananas comosus/GFRP/epoxy composites by TOPSIS & weighted aggregates sum product assessment method
S Gokulkumar, PR Thyla, S Sathish, N Karthi, L Prabhu, P Vignesh, ...
Materials Today: Proceedings 45, 7980-7985 , 2021
2021
Citations: 11
Wear performance and mechanical properties of unidirectional sisal/carbon/flax hybrid reinforced epoxy composites
R Anand Kumar, SSS Sindhu, M Kumaresan, S Sathish, N Karthi, ...
IOP conference series: materials science and engineering 988 (1), 012010 , 2020
2020
Citations: 7
Acoustical behavior of camellia sinensis/ananas comosus fiber based uni-directional corrugated panel for sound damping application
N Karthi, S Gokulkumar, S Sathish, US Rajkumar
Materials Research Express 9 (12), 125309 , 2022
2022
Citations: 3
Extraction, Treatment and Applications of Bio Fiber CompositesA Critical Review
S Sathish, L Prabhu, S Gokulkumar, N Karthi, D Balaji, N Vigneshkumar
Composite and Composite Coatings, 1-22 , 2022
2022
Citations: 3
Hybridization in Metal Additive Manufacturing: Current Status and Future Prospectives
A Sitharaj, B Arulmurugan, N Karthi, MS Dhanushh, SR Deepak, M Ajay
International Conference on Additive Manufacturing, 467-482 , 2024
2024
Citations: 2

KARTHI N

RESEARCH, TEACHING, or OTHER INTERESTS

Scopus Publications

RECENT SCHOLAR PUBLICATIONS

MOST CITED SCHOLAR PUBLICATIONS