@vmkvec.ac.in
Professor/Electronics and Communication Engineering
Vinayaka Missions Kirupananda Variyar Engineering College
B.E.,MTech,PhD
VLSI Design
Scopus Publications
Scholar Citations
Scholar h-index
Scholar i10-index
S. Venkatachalam, P. Kavitha, Pradnya Kirankumar Ingle, G. Ramachandran, R. Sasikala, and T. Muthumanickam
IEEE
Crops require irrigation in order to grow, and irrigation promotes economic growth gradually. The time required for an effective water flow to the crop fields will be determined by the combinations of these parameters. An essential component of the production of agricultural products is irrigation. Moreover, the current sky circumstances are specified by earlier study, which yields results that are 95 percent accurate. The agronomic design, which determines the quantity of water required for each crop, is an additional task. An irrigation system based on fuzzy rules has been devised for the other research. However, the proposed model has an additional feature: a rain sensor. It makes use of to get around the problem of irregular irrigation activation. The other feature that activates the spray on the region when the farmer flips on the fertilizer button is fertilizer control.
M. P. Varghese and T. Muthumanickam
AIP Publishing
Varghese M P and Muthumanickam T
Seventh Sense Research Group Journals
Chandrashekhar Kumar and T. Muthumanickam
Auricle Technologies, Pvt., Ltd.
In this research paperwork, thereis the design and implementation of aBot with the ability to work in four directions of movement forward, backward, left, and right using aself-governingstability system. The bot's resultingbe in command of objective is to follow a path at the required speed, while its primary control purpose is to maintain equilibrium whenever the balance position is unstable owing to a change in the center of gravity. We report our surveys into the concertevaluation of a highly linear four-wheeledmatchingmachine using a PID regulator and a PI-PD regulator. Here I have added advantages with the AI evaluation feedback linearization technique to detect and process with auto error time solutions. The key benefits include cogency in the actual application; switchdevice, enhanced performance, and capacity to overcome uncertainties. Simulated and experimental findings are used to compare and support a performance evaluation of the system. Numerous automatic systems for detecting traffic accidents have been developed by researchers. These techniques frequently make use of many applications such as smartphones, infrared sensors, and mobile applications.All of these techniques fall short when it comes to the instinctiverecognition of traffic accidents. The sifters used in smartphones may make it difficult to detect low-speed collisions. The suggested system does not specify the threshold distances at which an IR sensor will react. It is suggested to use a revolutionary method based on ultrasonic sensors.Using an ultrasonic sensor to identify accidents allows for the ability to do so not only in different street contexts but also in industrial settings, busy intersections, and weather circumstances like clouds, fog weather, rain, and heavy traffic.
K Aravinda, L. Manjunath, S. Elango, S. Krishnaveni, G. Ramachandran, PM Murali, and T. Muthumanickam
IEEE
The patients and older people with serious conditions, the failure to take medications as prescribed can be quite dangerous to their health. Using IoT A medical caretakers is suggested as a solution to that issue. The purpose of this pillbox is to assist patients in taking the right medications at the proper dosage at the appropriate times while also helping to record the patient's medical history. The pillbox can be configured using an app, and once the patient presses. Additionally, it will maintain the pill count and provide an alert when the quantity is low. Thus, the purpose of this clever pillbox is to make patients' lives easier while maintaining their health. The need for healthcare is increasing due to the growing world population, increasing expectations for effective treatment, and a general rise in life satisfaction. As a result, the development of new and more advanced scientific and technology therapies is required because healthcare continues to be one of the biggest social and economic challenges in the world.
A. Celina, Vijilius Helena Raj, V.K. Ajay, G. Ramachandran, Chandrashekhar Kumar, and T. Muthumanickam
IEEE
The use of artificial intelligence (AI) technology in computers has increased recently, as evidenced by the numerous research electronics goods. Many of these researchers have specialists who link and mix artificial intelligence (AI) in computers with electronic design. As a result, it makes it possible for a lot of researchers to continue researching the more advanced growth path of computer AI technology. It explores the features and value of computer AI technology in the design of electronic products in more detail and suggests that applying computer AI to the creation of electronic products is challenging. Additionally, this essay highlights the pertinent techniques and approaches for using AI in the creation of electronic products. Additionally, this can broaden the applications of computer AI technology, which is now the cornerstone of study into the design of electronic products.
Muhammed Shafi, S.Sheik Mohammed, T. Sheela, T. Muthumanickam, and G.Suresh Kumar
IEEE
Today, technology is rapidly advancing to meet the growing needs of humanity, with a particular focus on robots. Robotics refers to the creation of machines that can perform tasks or actions typically done by humans, either autonomously or via remote control. One of the major advantages of robots is their ability to operate in hazardous environments that are unsafe for humans. As a result, scientists are continually seeking to improve robots by developing new controllers and designs to make them more efficient and reliable. Our mini project centers around categorizing home robots based on the specific task they are designed to perform. The categorization is based on the object of operation. Our system features a semi-humanoid robot prepared with Google Assistant to interact with humans and carry out tasks according to our commands. The robot has the ability to move in different directions, halt, grip and release objects, and move its arms vertically. Furthermore, it includes a built-in vacuum cleaner feature that permits the robot to tidy floors.
Thiagarajan Kittappa, C. Sandhya, V. Krishnan, Shilpa Sharma, Deepti Khubalkar, G. Ramachandran, and T. Muthumanickam
IEEE
Science and technology are in a rapid development stage as a result of the advancement and progress of the times, and it is clear that the contemporary civilization has entered the era of Artificial Intelligence (AI). This research focuses on AI applications in the context of Industry 4.0 concept. This current work discusses AI acceptance in the manufacturing industry and its promotion in intelligence optimization. The Virtual model concept is presented to improve the rationale of various interfaces. The communication and information intelligence AI algorithms are examined in depth. The concept of a smart city and AI applications, as well as how AI plays a role in its implementation have been discussed.
Chandrashekhar Kumar and T. Muthumanickam
IEEE
Over the years, the Indian pharmaceutical business has been the most awaited around the world. It is the world's largest supplier of medical facilities and a leader in pharmaceutical manufacture. The Internet of Things offers the pharmaceutical business a variety of new individualised market prospects, a more controlled environment for pharma manufacturing, the ability to avoid equipment maintenance, and a more varied supply chain management system. Pharmaceutical manufacturing may be unable to provide benign and safe medicinal production and circulation due to transparency issues. Adoption of the internet of things could give pharma companies using pharma IoT a new competitive advantage. This is a conceptual exploratory investigation that shows the future of Indian pharmaceuticals, which is on the point of being self-sufficient. Customers wearing internet-connected digital devices and sensors implanted in wearable's could be tracked using the internet of things, artificial intelligence, big data analytics, and tracking of customers carrying internet-connected digital devices and sensors implanted in wear ables. This would also serve as a warning to both clinical makers and consumers, allowing for the development of tailored products and a brighter future for the Indian pharmaceutical industry. Future Pharma would transform production by employing better, more reliable vast volumes of data to link paraphernalia throughout development and distribution.
Sheik Mohammed. S, T. Sheela, and T. Muthumanickam
IEEE
In the present scenario almost the entire crop cultivation in farmlands are mostly likely to be damaged by intrusion of animals like wild boars, elephants, buffaloes, birds, etc. However this may cause huge loss to the farmers but it is quite impossible to stay alert in the farm field for 24/7 hours to protect the crops. To surmount the above problem, a prototype for animal intrusion detection has been designed using a modified CNN algorithm to efficiently detect the existence of animal intrusion in the crop field. It provides an alert signal to indicate while averting the animal with no injuries. This paper proposes a system that includes a PIR sensor, Thermal Imaging camera, GSM module and hologram connected with the Raspberry Pi module. A Modified CNN algorithm is used to validate the captured animal image and later alert the user. Absolute crop protection is guaranteed from animal trespass thereby protecting the farmer's from huge loss.
Nilamani Ganesan and T. Muthumanickam
IEEE
This research study focuses on finding solutions to the emerging challenges in the embedded systems' power consumption optimization. First, the challenges in physical CMOS power consumption are analyzed and further various real-time limitationsand load characteristics are explored. Further, various power consumption techniques are considered by including DMP, DVS/DFS, AVS, and ABB. Issues with organising a feedback and determining adaptability for various embedded systems are investigated.
J Thilagavathi, K Lavanya, S. Elango, M. Santhoshi, T. Muthumanickam, and G. Ramachandran
IEEE
Medical engineering research has recently advanced significantly. The ability to accurately record a significant amount of medical data has increased because to advancements in measuring device technology, which has caused medical data to rise rapidly. A significant amount of data has been encountered and it is crucial to use this enormous amount of data sensibly. By using an Artificial Intelligence (AI) based reasoning engine to scan medical data, it is possible to compile user-generated keywords and instantly suggest relevant content to users. The decision tree algorithm is emphasized as one of the main technologies to implement data mining in this research, and it also explores how data mining technology is used in clinical medical diagnosis mining and analysis.
Sheik Mohammed. S, T. Sheela, and T. Muthumanickam
IEEE
Now-a-davs Internet of Things (IoT) is used in various real-time applications, Including smart health monitoring. The existing health monitoring system can only collect the basic information about heat. heartbeat. and BP (Blood Pressure). This research study proposes an effective examination of patient's brain signals and detect the health status of the patient in real time. The main objective of the proposed study is to provide a proper optimized value about the mentally challenged patients by collecting the data information from brain signals with 24 channels and study the body parameters through each EEG (Electroencephalography) signal channel. Here, the collected data is pre-processed by using Machine Learninz (ML) tools and Neural Networks (NN) with Python programming language, By collecting the data information from brain signals with EEG sensors, an optimized value and solution can be provided to the patients suffering from Cerebral Palsy (CP). The collected data is then stored in a cloud storage platform and it can be accessed from any remote location. The stored data is then collected and filtered by using PCA techniques and further the Artifact siznals (Noise) are removed to diagnose seizures by Identifying brain signal parameters (Alpha, Beta, Delta and Theta). Further, a novel model has been designed by using python programming languaze for training the machine with a maximum number of datasets in order to check accuracy and predict the seizure levels of any CP patient. Neural Network (NN) algorithms were applied here by using python programming language in order to check the percentage error in the data processing mechanism. Once the data is analyzed with the proposed model it suggests the CP patient for Tentative Treatment.
M P Varghese and T. Muthumanickam
IEEE
Due to the vast amount of data collected and the very high level of complexity in VLSI design and manufacturing, the implementation using machine learning can be used in physical design has increased significantly. ML can be used to increase the abstraction level that is obtained from complex simulations based on physics models and provide results that represent a significant level of quality. Computer science techniques such as pattern matching and machine learning can reduce the design time of VLSI circuits by working with large datasets.
Kaustubh Kumar Shukla, T. Muthumanickam, and T. Sheela
IEEE
Enhancement of reliability and sensitivity plays a vital role in Micro-Electro-Mechanical Systems (MEMS) technology, and it can be done very effectively by reducing the failures (through minimization) of such kind of systems. As it is a much known fact that using micro fabrication technique product development is not so easy because of its high cost and such facilities are not available everywhere. In this research work the primary focus is to know about the trust-worthiness of MEMS based devices by designing and performance analysis through simulation in multiphysics environment. The main outcome of this work is to model a novel device with high reliability as well as sensitivity which are very useful for healthcare monitoring and related applications in different environments. Through literature survey several reliability problems like stiction, fractural defects, immobilization, structural instability and many more has been noticed and possible solutions has been investigated which has been tested and analyzed in multiphysics environment. In this paper several micro-shapes and micro- structures has been designed and tested using different sensing materials but end of the result it has been found that microcantilever arrays are more useful and simple. Apart from this it has been also noticed that microcantilever has high reliability and sensitivity, it has been compared by applying some pressure to achieve maximum displacement. So, this research work is recommending microcantilever array sensor for different health care applications because of its high sensitivity, selectivity, high reliability, simplicity and versatility with different medium.
Kaustubh Kumar Shukla and T. Muthumanickam
Elsevier BV
Kaustubh Kumar Shukla and T. Muthumanickam
IEEE
Presently engineering science plays a critical part in the environmental monitoring and healthcare. Through this research effort an array of micro cantilever is designed and analyzed with the help of Micro-Electro-Mechanical -Systems (MEMS) technology. Aim of this study is device should be easy to design, consume less energy, be simple to model, and be cost-effective and efficient. As a result, micro cantilevers are the perfect platform to explore for such issues because they can be employed as a very sensitive element in a variety of applications and different environment. Instead of a micro cantilever, a micro cantilever array has been modeled to improve the sensitivity. Because the device's output should be high, several types of studies have been carried out, including the use of nine unlike materials and accordingly the improvement in the sensitivity, as a conclusion SiO2 is the best choices for maximum displacement. Aside from that, several geometrical shapes built and analyzed for improved sensitivity in the form of maximum displacement. During the analysis process, a few facts emerged, such as how to make micro cantilever arrays simple and cost-effective. Instead of utilising three micro cantilevers as arrays, two micro cantilevers with the same efficiency can be utilized by adjusting the forces on the arrays' surfaces. Improved sensitivity and utmost displacement can be achieved by reducing effective areas across fixed end utilizing different geometrical variations. This inquiry report could be relevant in the development of a micro cantilever biosensor for the detection of various diseases.
Kaustubh Kumar Shukla and T. Muthumanickam
IEEE
A huge popularity of biosensors is because of its detection capability of bio molecules. Micro cantilevers are adding some additional features in this detection technique with the help of MEMS (Micro-Electro-Mechanical-Systems) technology. In this paper single, double and 3-strip microcantilevr has been designed and analyzed. The primary principle of this paper is to identify the bio molecule using the deflection of beam. Due to colliding of targeted molecules with sensing layer at free end of the microcantiliver enhancement of weight occurs as a result micro cantilever get bends. This bending provides a very important result that is how to detect the presence of cancer in the blood cells. It may be analyzed either in dynamic or static mode of micro cantilever. This research work is not providing a solution of how to be get cured from this disease but it is providing a suitable solution of how the cancer can be detected at its initial stage using a small amount of blood samples. Since, DNA (Deoxyribonucleic acid) and image based cancer detection techniques are very expensive and complicated; it is why this Micro-Electro-Mechanical Systems based micro cantilever technique has been suggested in this work. Additional advantage is since these devices are micro scale devices, thus very small amount of blood sample is required to test and identify the target molecules. Selection of a suitable sensing material is further additional benefits for this research and it has a huge scope.
Kaustubh Kumar Shukla and T. Muthumanickam
The Electrochemical Society
This research work is addressing the goal of achieving good health and well-being of human being by attempting the detection of a target analyte (HIV or other bimolecular analyte) using microcantilever. It is helpful to detect the bio-analytes because of its high sensitivity, selectivity, and structural simplicity. Depending on deflection of microcantilever by achieving maximum displacement, the device can be made extremely sensitive. The reason of making the device more sensitive is to detect even a single molecule also. Design has been done in three different stages. In the first stage it was estimated of the more suitable and sensitive sensing material. A second stage investigation has been done for the suitable construction of different shapes by introducing different holes in structure. At third stage research has been done about the multilayer to make the device more sensitive. Finally, concentration is to produce a high sensitive structure to detect the analyte quickly.
Kaustubh Kumar Shukla, T. Muthumanickam, and T. Sheela
Springer Nature Singapore
P. Mohana, M. Muthuvinayagam, P. Umasankar, and T. Muthumanickam
IEEE
In this proposed work, necessary design and optimized parameters are transmitted for the essential information exchange. This research study focuses on integrating WSN architecture. In actuality, many automated systems still require extensive human engagement; for example, a patient may need to visit multiple pharmacies in order to locate a specific sort of drug. A smart inventory system integrating Wireless Sensor Networks (WSN), Quick Response Codes (QR), and cloud services (Web) would solve numerous difficulties while also saving money for both patients and stakeholders. With all these chores, a speedier and more reliable system is required to manage operational and repeatable processes. Recent advancements in the field of portable devices have been substantial, particularly in the area of audio/music information delivery systems such as headphones that link to mobile/portable devices via wired or wireless communication. Usage of headphones connected with mobile devices by all age group people is getting higher practically every day, for doing multiple businesses like navigation, automation, bill payment, contest participation, news and events social media. This paper suggests the usage of four typical home appliances: a fan, a light, a coffee machine, and door alarms, using a single remote. Natural Language processing is used by the mobile device to interpret the user's voice command. To communicate with the Wi-Fi signals provided by these appliances, the project uses a smartphone application. The application gives commands to the Arduino devices and also responds to their responses. While a command is delivered from a remote location. As a result, the integrity and confidentiality of conveyed data, as well as the authentication of the services that provide that data are critical. As a result, security is a vital IoT feature. As a result, it includes a username and password-based authentication mechanism in the mobile application. To assist computers in understanding and responding to commands delivered in natural (human) language. NLP falls under the umbrella of human-computer interaction.
Garry Thomson. P, T. Muthumanickam, T. Sheela, and G. SureshKumar
IEEE
Technologies involved CMOS, are reaching the nano processing realm by resulting in several scaling challenges in the case of complementary MoSFETs, which have a short level of channel in their effect. The process of variation influences the design performance and different parameters of the device. FinFET makes a new outstanding effort, which incorporates better level of control in the conditional channel. Also, its lower performance makes a change in 6T Static process Random Access Memory through circuit function design. It reduces the bit line with loading effect, which in turn improves Static Random-Access Memory and their performance level. 6T SRAM with conventional level of cell suffers very serious conditional stability level of degradation problems. It processes their disturbance in the low-level power type mode. 6T SRAM faces major problem in the output level voltage with a highly reduced level of threshold type voltage conditional transistor, which will destroy whole of the read operation in the 6T type SRAM cell. Noises make it very easy to destroy the stored level data to nodes with 6T Static Random Access Memory cell. It makes the direct as the path in between storage nodes and their bit lines. This paper needs to overcome the 8T level SRAM as cell in their proposed read where the whole stability is expected to improve. Level of this makes in simulation of evaluating the performance level of the FinFET-level based 6T conditional SRAM, 8T level SRAM and 10T type SRAM as cells and need to compare the results by micro wind tool.
T. Muthumanickam and D. Vinod Kumar
IEEE
Cyber-attack is an attempt made from an individual or cybercriminals to hack a particular computer or network through internet. This leads to loss of information stored in the connected system and in certain cases it leads to denial of service. The traditional methods on addressing cyber-attacks are not efficient to the complex and high sophisticated attacks. Hence the deep learning based techniques are generated in recent years for estimating the attacks presence in a communication network. However, the deep learning networks are complex in nature as they are handled with a huge range of features during its operation. Therefore a bottleneck layer was developed to reduce the parameters count and feature formulations from a given data. The residual blocks are deeper than the traditional network architectures and it is achieved by enabling a 1x1 convolution block in the design flow. The performance of the bottleneck layer on the ANN and DNN algorithm is verified in the proposed work with an openly available CIDDS-001 dataset dataset. The CIDDS dataset is one of the recent dataset consists of server traffic data on OpenStack and external severs.
R. Sethupathi, Chandra Kumar Dixit, V. V. Hari Babu, G. Ramachandran, A. Arunraja, and T. Muthumanickam
AIP Publishing