RECENT SCHOLAR PUBLICATIONS
- A biomechanical evaluation on Cubic, Octet, and TPMS gyroid Ti6Al4V lattice structures fabricated by selective laser melting and the effects of their debris on human osteoblastN Wang, GK Meenashisundaram, D Kandilya, JYH Fuh, ST Dheen, ...Biomaterials Advances 137, 212829 2022
- A comparative investigation on the mechanical properties and cytotoxicity of Cubic, Octet, and TPMS gyroid structures fabricated by selective laser melting of stainless steel 316LN Wang, GK Meenashisundaram, S Chang, JYH Fuh, ST Dheen, ...Journal of the Mechanical Behavior of Biomedical Materials 129, 105151 2022
- High-density WC–45Cr–18Ni cemented hard metal fabricated with binder jetting additive manufacturingZ Xu, GK Meenashisundaram, FL NgVirtual and Physical Prototyping 17 (1), 92-104 2022
- Detailed assessments of tribological properties of binder jetting printed stainless steel and tungsten carbide infiltrated with bronzeS Cui, S Lu, K Tieu, GK Meenashisundaram, L Wang, X Li, J Wei, W LiWear 477, 203788 2021
- Damage detection in glass/epoxy laminated composite plates using modal curvature for structural health monitoring applicationsM Govindasamy, G Kamalakannan, C Kesavan, GK MeenashisundaramJournal of Composites Science 4 (4), 185 2020
- A study of Titanium and Magnesium particle-induced oxidative stress and toxicity to human osteoblastsN Wang, S Maskomani, GK Meenashisundaram, JYH Fuh, ST Dheen, ...Materials Science and Engineering: C 117, 111285 2020
- Fabrication of porous CoCrFeMnNi high entropy alloy using binder jetting additive manufacturingZ Xu, Z Zhu, P Wang, GK Meenashisundaram, SML Nai, J WeiAdditive Manufacturing 35, 101441 2020
- Binder jetting additive manufacturing of high porosity 316L stainless steel metal foamsGK Meenashisundaram, Z Xu, MLS Nai, S Lu, JS Ten, J WeiMaterials 13 (17), 3744 2020
- The combined influence of elevated pre-sintering and subsequent bronze infiltration on the microstructures and mechanical properties of 420 stainless steel additivelySL Lu, GK Meenashisundaram, P Wang, SML Nai, J WeiAdditive Manufacturing 34, 101266 2020
- Fabrication of Ti+ Mg composites by three-dimensional printing of porous Ti and subsequent pressureless infiltration of biodegradable MgGK Meenashisundaram, N Wang, S Maskomani, S Lu, SK Anantharajan, ...Materials Science and Engineering: C 108, 110478 2020
- A new approach to synthesize nano-yttrium boride particle through metallothermic reduction processM Sadhasivam, LJ Berchmans, GK Meenashisundaram, ...Journal of Mining and Metallurgy, Section B: Metallurgy 56 (1), 77-87 2020
- Additive manufacturing of magnesium–zinc–zirconium (ZK) alloys via capillary-mediated binderless three-dimensional printingM Salehi, S Maleksaeedi, MAB Sapari, MLS Nai, GK Meenashisundaram, ...Materials & Design 169, 107683 2019
- A paradigm shift towards compositionally zero-sum binderless 3D printing of magnesium alloys via capillary-mediated bridgingM Salehi, S Maleksaeedi, SML Nai, GK Meenashisundaram, MH Goh, ...Acta Materialia 165, 294-306 2019
- An investigation into interaction between magnesium powder and Ar gas: Implications for selective laser melting of magnesiumM Salehi, S Maleksaeedi, H Farnoush, MLS Nai, GK Meenashisundaram, ...Powder technology 333, 252-261 2018
- Hybrid Binder to Mitigate Feed Powder Segregation in the Inkjet 3D Printing of Titanium Metal PartsS Maleksaeedi, GK Meenashisundaram, S Lu, M Salehi, W JunMetals, MDPI 8 (5), 322 2018
- Insight into cytotoxicity of Mg nanocomposites using MTT assay techniqueTHD Ong, N Yu, GK Meenashisundaram, B Schaller, M GuptaMaterials Science and Engineering: C 78, 647-652 2017
- Using lanthanum to enhance the overall ignition, hardness, tensile and compressive strengths of Mg-0.5 Zr alloyGK Meenashisundaram, THD Ong, G Parande, V Manakari, S Xiang, ...Journal of Rare Earths 35 (7), 723-732 2017
- Enhancing the tensile and ignition response of monolithic magnesium by reinforcing with silica nanoparticulatesG Parande, V Manakari, GK Meenashisundaram, M GuptaJournal of Materials Research 32 (11), 2169-2178 2017
- Lanthanum effect on improving CTE, damping, hardness and tensile response of Mg-3Al alloyA Kumar, GK Meenashisundaram, V Manakari, G Parande, M GuptaJournal of Alloys and Compounds 695, 3612-3620 2017
- Enhancing significantly the damping response of Mg using hollow glass microspheres while simultaneously reducing weightV Manakari, G Parande, M Doddamani, GK Meenashisundaram, M Gupta 2017