Cutting Performance Analysis of Surface Textured Tools in Dry Turning: Optimisation of process parameters Rima Singha Roy, Sushmita Dash, Trupti Ranjan Mahapatra, Debadutta Mishra, Sanjib Jaypuria E3s Web of Conferences, 2021 Owing to minimum quantity or no use of toxic coolants, the dry machining technique has been evidenced to be a versatile sustainable method. However, during dry machining of ductile alloys, the severe tool wear and metal adhesion on the rake face of the cutting tool has been a matter of great concern. In the present work, an attempt has been made to assess the improvement in the tribological conditions in dry cutting by providing surface texturing on the rake face of High-Speed Steel (HSS) cutting tool. Dimples were produced on the rake surface of the HSS tool using pulsed Nd: YAG Laser and dry turning of pure aluminium is performed using the textured tool based on Taguchi’s L9 orthogonal array (OA) experimental design. The dry cutting of pure aluminium was also performed using the conventional/un-textured tool and the obtained results are used for comparison purpose. Improved turning performance in terms of material removal rate and surface roughness is found from the conformation tests using optimum process parameter determined by the Taguchi analysis. The ANOVA results suggests the effectiveness of using the textured tools during dry machining is significantly affected by feed and speed.
Electron beam welding: Current trends and future scopes Handbook of Welding Processes Control and Simulation, 2021
Role of numerical simulations in weld analysis Handbook of Welding Processes Control and Simulation, 2021
Corrosion analysis of welded Nb-1% Zr-0.1% C alloy in lead-bismuth eutectic solution SK Gupta, S Jaypuria, DK Pratihar, P Saha Journal of Alloys and Compounds 968, 172273 , 2023 2023 Citations: 2
Effects of thermal ageing time and temperature during heat-treatment on the mechanical properties of fiber laser welded Nb-1% Zr-0.1% C alloy in continuous wave mode SK Gupta, S Jaypuria, DK Pratihar, P Saha Materials Characterization 206, 113448 , 2023 2023 Citations: 5
Study on pulsed wave mode laser welding of Nb-Zr-C alloy and many-objective optimization using meta-heuristic techniques SK Gupta, S Jaypuria, AK Das, DK Pratihar, P Saha Welding in the World 67 (11), 2535-2555 , 2023 2023 Citations: 4
Optimization of static response of laminated composite plate using nonlinear FEM and ANOVA Taguchi method TRMDM Pratyush Kumar Sahu, Sanjib Jaypuria Steel and Composite Structures 48 (6), 625-639 , 2023 2023 Citations: 1
Swarm intelligence-based modeling and multi-objective optimization of welding defect in electron beam welding S Jaypuria, AK Das, PKC Kanigalpula, D Das, DK Pratihar, D Chakrabarti, ... Arabian Journal for Science and Engineering 48 (2), 1807-1827 , 2023 2023 Citations: 7
Expert Systems With Applications kkS S Jaypuria, V Bondada, SK Gupta, DK Pratihar, D Chakrabarti, MN Jha Expert Systems With Applications 211, 118677 , 2023 2023
Prediction of electron beam weld quality from weld bead surface using clustering and support vector regression S Jaypuria, V Bondada, SK Gupta, DK Pratihar, D Chakrabarti, MN Jha Expert Systems with Applications 211, 118677 , 2023 2023 Citations: 29
Experimental Investigations and Defect Characterization of Electron Beam Welded ETP Copper and CuCrZr Alloy Using Machine Learning Approaches SK Jaypuria IIT Kharagpur , 2022 2022
Experimental investigation on microstructure and mechanical properties of laser-welded Nb-1% Zr-0.1% C alloy SK Gupta, S Jaypuria, DK Pratihar, P Saha Journal of Materials Engineering and Performance 30 (11), 8412-8425 , 2021 2021 Citations: 13
Cutting performance analysis of surface textured tools in dry turning: optimisation of process parameters R Singha Roy, S Dash, TR Mahapatra, D Mishra, S Jaypuria E3S Web of Conferences 309, 01164 , 2021 2021 Citations: 5
Role of numerical simulations in weld analysis D Das, S Jaypuria, S Gupta, A Kundu, DK Pratihar, GG Roy Handbook of Welding: Processes, Control and Simulation, 351 - 368 , 2021 2021
Meta-Heuristic Algorithms-Tuned Elman vs. Jordan Recurrent Neural Networks for Modeling of Electron Beam Welding Process. D Das, AK Das, AR Pal, S Jaypuria, DK Pratihar, GG Roy Neural Process. Lett. 53 (2), 1647-1663 , 2021 2021 Citations: 16
Input–output modeling and multi-objective optimization of weld attributes in EBW AK Das, D Das, S Jaypuria, DK Pratihar, GG Roy Arabian Journal for Science and Engineering 46 (4), 4087-4101 , 2021 2021 Citations: 11
Weld optimisation D Das, S Jaypuria, DK Pratihar, GG Roy Science and technology of welding and joining 26 (3), 181-195 , 2021 2021 Citations: 25
Computational intelligence based prediction of joint penetration in laser fabrication S Jaypuria, TR Mahapatra, S Sahoo, O Jaypuria Materials Today: Proceedings 46, 4854-4858 , 2021 2021 Citations: 2
Study on mechanical and metallurgical properties of fiber laser welded Nb-1% Zr-0.1% C alloy SK Gupta, S Jaypuria, DK Pratihar, P Saha Optics & Laser Technology 127, 106153 , 2020 2020 Citations: 19
A critical study of bead-on-plate laser welding of niobium alloy PWC-11 SK Gupta, S Datta, S Jaypuria, DK Pratihar, P Saha Advances in Materials and Manufacturing Engineering: Proceedings of ICAMME … , 2020 2020 Citations: 5
Effect of amplitude oscillation on spiking in electron beam welding of copper plate S Jaypuria, SK Gupta, DK Pratihar, D Chakrabarti, MN Jha Advances in Materials and Manufacturing Engineering: Proceedings of ICAMME … , 2020 2020 Citations: 3
Fuzzy C-means clustering-based ANFIS regression modeling of hybrid laser-TIG fabrication S Jaypuria, TR Mahapatra, S Tripathy, S Nakhale, SK Gupta Advances in Materials and Manufacturing Engineering: Proceedings of ICAMME … , 2020 2020 Citations: 7
Influence of water binder ratio on strength and acid resistance of concrete made up of mineral admixture as supplementary cementitious material S Sahoo, TR Mahapatra, N Priyadarshini, S Mahapatra, S Naik, ... Materials Today: Proceedings 26, 796-803 , 2020 2020 Citations: 30
MOST CITED SCHOLAR PUBLICATIONS
Experimental investigations, input-output modeling, and optimization of spiking phenomenon in electron beam welding of ETP copper plates PKC Kanigalpula, S Jaypuria, DK Pratihar, MN Jha Measurement 129, 302-318 , 2018 2018 Citations: 46
Influence of water binder ratio on strength and acid resistance of concrete made up of mineral admixture as supplementary cementitious material S Sahoo, TR Mahapatra, N Priyadarshini, S Mahapatra, S Naik, ... Materials Today: Proceedings 26, 796-803 , 2020 2020 Citations: 30
Prediction of electron beam weld quality from weld bead surface using clustering and support vector regression S Jaypuria, V Bondada, SK Gupta, DK Pratihar, D Chakrabarti, MN Jha Expert Systems with Applications 211, 118677 , 2023 2023 Citations: 29
Weld optimisation D Das, S Jaypuria, DK Pratihar, GG Roy Science and technology of welding and joining 26 (3), 181-195 , 2021 2021 Citations: 25
Metaheuristic tuned ANFIS model for input-output modeling of friction stir welding S Jaypuria, TR Mahapatra, O Jaypuria Materials Today: Proceedings 18, 3922-3930 , 2019 2019 Citations: 24
Study on mechanical and metallurgical properties of fiber laser welded Nb-1% Zr-0.1% C alloy SK Gupta, S Jaypuria, DK Pratihar, P Saha Optics & Laser Technology 127, 106153 , 2020 2020 Citations: 19
Electron beam butt welding of Cu-Cr-Zr alloy plates: experimental investigations, studies on metallurgical and mechanical properties S Jaypuria, J Meher, PKC Kanigalpula, DK Pratihar Fusion Engineering and Design 137, 209-220 , 2018 2018 Citations: 18
Meta-Heuristic Algorithms-Tuned Elman vs. Jordan Recurrent Neural Networks for Modeling of Electron Beam Welding Process. D Das, AK Das, AR Pal, S Jaypuria, DK Pratihar, GG Roy Neural Process. Lett. 53 (2), 1647-1663 , 2021 2021 Citations: 16
Heat treatment of low carbon steel S Jaypuria 2009 Citations: 15
Experimental investigation on microstructure and mechanical properties of laser-welded Nb-1% Zr-0.1% C alloy SK Gupta, S Jaypuria, DK Pratihar, P Saha Journal of Materials Engineering and Performance 30 (11), 8412-8425 , 2021 2021 Citations: 13
Effect of arc length trim and adaptive pulsed-MIG process parameters on bead profile of stainless steel with synergic power source S Jaypuria, TR Mahapatra, S Sahoo, O Jaypuria Materials Today: Proceedings 26, 787-795 , 2020 2020 Citations: 13
Input–output modeling and multi-objective optimization of weld attributes in EBW AK Das, D Das, S Jaypuria, DK Pratihar, GG Roy Arabian Journal for Science and Engineering 46 (4), 4087-4101 , 2021 2021 Citations: 11
Development of activated flux for deep penetration in GTAW S Jaypuria, S Khandai, TR Mahapatra, A Singh Materials Today: Proceedings 18, 4703-4710 , 2019 2019 Citations: 10
Effects of welding parameters on mechanical properties in electron beam welded CuCrZr alloy plates S Jaypuria, N Doshi, DK Pratihar IOP Conference Series: Materials Science and Engineering 338 (1), 012013 , 2018 2018 Citations: 10
Swarm-intelligence-based computation for parametric optimization of electron beam fabrication S Jaypuria, AK Das, DK Pratihar Advances in Computational Methods in Manufacturing: Select Papers from ICCMM … , 2019 2019 Citations: 8
Comparative study of feed-forward and recurrent neural networks in modeling of electron beam welding S Jaypuria, SK Gupta, DK Pratihar Advances in Additive Manufacturing and Joining: Proceedings of AIMTDR 2018 … , 2019 2019 Citations: 8
Swarm intelligence-based modeling and multi-objective optimization of welding defect in electron beam welding S Jaypuria, AK Das, PKC Kanigalpula, D Das, DK Pratihar, D Chakrabarti, ... Arabian Journal for Science and Engineering 48 (2), 1807-1827 , 2023 2023 Citations: 7
Fuzzy C-means clustering-based ANFIS regression modeling of hybrid laser-TIG fabrication S Jaypuria, TR Mahapatra, S Tripathy, S Nakhale, SK Gupta Advances in Materials and Manufacturing Engineering: Proceedings of ICAMME … , 2020 2020 Citations: 7
Fuzzy inference system-based neuro-fuzzy modeling of electron-beam welding S Jaypuria, DK Pratihar Advances in Computational Methods in Manufacturing: Select Papers from ICCMM … , 2019 2019 Citations: 7
Effects of thermal ageing time and temperature during heat-treatment on the mechanical properties of fiber laser welded Nb-1% Zr-0.1% C alloy in continuous wave mode SK Gupta, S Jaypuria, DK Pratihar, P Saha Materials Characterization 206, 113448 , 2023 2023 Citations: 5
