BENMOHAMMED Brahim

@univ-batna2.dz

University Batna 2 - Mostefa Benboulaid, Faculty of Technology, Mechanicl Engineering Departement
University Batna 2 - Mostefa Benboulaid

BENMOHAMMED Brahim


                  Download Compact PDF  
https://researchid.co/chaima-2008

RESEARCH INTERESTS

Identification of cutting forces laws under dynamic behaviour
Stability lobes by simulation process in turning and milling processes
Dynamic behaviour of cutting processes
Dynamic simulation of ball machining process
Mechanistic approach simulation of ball end milling process
7

Scopus Publications

63

Scholar Citations

5

Scholar h-index

1

Scholar i10-index

Scopus Publications

  • Prediction and experimental validation of cutting forces in ball end milling of aluminum 7075-T6 alloy
    Mekentichi Sifeddine, Brahim Benmohammed, Daniel Schlegel, Sora Lee-Remond, Ahmed Benyoucef
    Advances in Science and Technology Research Journal, 2025
  • Stability lobes for 1DOF and 2DOF milling system
    Cherifa Azoui, Brahim Benmohammed
    Lecture Notes in Mechanical Engineering, 2015
  • Stability lobes for 1DOF and 2DOF milling system
    Cherifa Azoui, Brahim Benmohammed
    Lecture Notes in Control and Information Sciences, 2015
  • Cutting forces measurements during discontinuous machining process
    B. Benmohammed
    International Journal of Machining and Machinability of Materials, 2012
    He presents the various cases where the measurement of cutting forces in fast transitory mode is necessary. He exposes also a method of compensation of inertial effects which denatures the signals provided by the most used piezoelectric dynamometers. The possibilities of this method, based on the accelerations measurements of the upper part of the dynamometer, are exposed for the case of a discontinuous turning process. It is shown that the undesirable effects related to the resonance frequencies of the dynamometer and to its base movements are mainly eliminated.
  • CFRP drilling model: Fiber orientation influence on mechanical load and delamination
    Cedric Bonnet, Brahim Benmohammed, Gérard Poulachon, Joël Rech, Yannick Girard
    Advanced Materials Research, 2011
    This paper presents a combined experimental and theoretical investigation and proposes a mechanical load modeling of a multidirectional layer CFRP drilling to avoid fibers delamination by a better choice of their orientations. A first step consists in working with unidirectional CFRP to correlate cutting mode (opening, shear and bending) with force level depending on the angular tool position. The discretisation of the cutting edge is employed to know the exact contribution of each elementary part of the edge, resulting in a complete drill operation modeling (tip penetration, full engagement and exit). A second step consists in using this unidirectional approach to model a multidirectional layer CFRP drilling. In this case, layers are cut simultaneously which induce brutal mechanical load variation. A summation method is used to estimate the force level depending on fiber arrangement. Optimal orientation combinations are underlined by this approach, in order to improve the CFRP design, by considering the manufacturing concerns.
  • Determination of stability charts for tunrning (case of orthogonal cutting) and validation of a simulation method
    B. Benmohammed, F. Lapujoulade
    Materiaux Et Techniques, 2009
    On propose de determiner dans quelles conditions apparaissent des vibrations auto-entretenues (broutement). Pour cela, on utilise la simulation du comportement dynamique d'un systeme d'usinage et une loi de force de coupe est obtenue par une methode indirecte, en comparant les resultats de la simulation a ceux issus de l'experimentation.
  • Modelling of the Tool-Part contact in the case of complex surfaces milling by using an hemispherical milling tool
    A. Benyoucef, B. Benmohammed
    Materiaux Et Techniques, 2009
    L'usinage des formes complexes est une caracteristique de la fabrication des moules et des matrices. Du fait que les formes deviennent de plus en plus compliquees, les moules et les matrices ont des formes qui sont de plus en plus complexes et exigent des tolerances qui sont particulierement severes. L'un des principaux objectifs a atteindre est la precision de l'usinage et l'amelioration de l'etat micro-geometrique des surfaces usinees en finition, en vue de la minimisation des operations de polissage apres usinage qui sont encore necessaires pour l'obtention d'une piece finie exigee par le monde de l'industrie automobile ou aeronautique. Pour atteindre ces objectifs, il est important de choisir un outil qui repond aux exigences d'un usinage pouvant se realiser dans differentes orientations. Ceci va permettre d'usiner des pieces de formes complexes a l'aide d'une fraiseuse a plusieurs axes. Parmi les outils permettant la realisation de ce travail, il y a la fraise hemispherique. Le but de ce travail est donc d'etudier la geometrie de la partie spherique de la fraise, afin de determiner a chaque instant les zones de contact entre la piece de forme complexe et l'outil qui suit une trajectoire dans l'espace.

RECENT SCHOLAR PUBLICATIONS

  • Simulation of cutting forces in ball-end milling using mechanistic model: a comparative study of aluminum alloys from the: 2000, 5000, 6000, and 7000 series
    M Sifeddine, B Brahim
    2025
  • Prediction and experimental validation of cutting forces in ball end milling of aluminum 7075-T6 alloy
    M Sifeddine, B Benmohammed, D Schlegel, S Lee-Remond, A Benyoucef
    Advances in Science and Technology. Research Journal 19 (8) , 2025
    2025
    Citations: 2
  • Study of influence of feed rate and depth of cut on cutting forces in ball end milling of Aluminum alloy 7075-T6: using a mechanistic approach.
    M Sifeddine, B Brahim
    3 rd International Workshop on Structural Mechanics and Materials (IWSMM'24 … , 2024
    2024
  • Predicting Cutting Forces for Peripheral Milling Using Oxley Predictive Theory and Johnson-Cook Behavioral Law
    A Benali, B Brahim
    2nd International Conference on Scientific and Innovative Studies (ICSIS'24 … , 2024
    2024
  • Obtaining Stability Lobes in High Speed Milling by Using Simulation Methods
    A Cherifa, B Brahim
    2nd International Conference on Scientific and Innovative Studies (ICSIS'24 … , 2024
    2024
  • Analyzing the Effects of Cutting Speed on Cutting Forces in Ball End Milling of Aluminum Alloy 6061-T6: A Mechanistic Approach
    M Sifeddine, B Brahim
    2nd International Conference on Scientific and Innovative Studies (ICSIS'24 … , 2024
    2024
  • EFFECT OF CUTTING PARAMETRES ON CUTTING FORCES OBTAINED BY A MECHANISTIC APPROACH IN BALL END MILLING PROCESS
    SM B Benmohammed
    DR B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY JALANDHAR – 144011, PUNJAB … , 2023
    2023
  • Study the influence of feed per tooth on cutting forces in ball end milling of aluminum and titanium alloys using a mechanistic approach.
    M Sifeddine, B Brahim
    THE FIRST NATIONAL CONFERENCE ON MECHANICAL ENGINEERING (NCME'23), 1-6 , 2023
    2023
  • Influence des paramètres de coupe sur les forces de coupe pour le fraisage périphérique
    SM B Benmohammed
    2nd Edition of the international conference on innovative materials … , 2022
    2022
  • Modèlisation et simulation du fraisage en bout pour déterminer la hauteur de crête pour les fraises de forme : complexe, hèmisphèrique et torique
    SM B Benmohammed
    International Conference on Mechanical Sciences , 2021
    2021
  • STABILITY LOBES PREDICTION IN HIGH SPEED MILLING
    C AZOUI, B BENMOHAMMED
    International Journal of Modern Manufacturing Technologies 10 (No. 1), 37-42 , 2018
    2018
  • Evolutions des efforts de coupe en simulant la coupe orthogonale (S09)
    H Lynda
    CFM 2015-22ème Congrès Français de Mécanique , 2015
    2015
  • Design and Modeling of Mechanical Systems-II: Proceedings of the Sixth Conference on Design and Modeling of Mechanical Systems, CMSM'2015, March 23-25, Hammamet, Tunisia
    M Chouchane, T Fakhfakh, HB Daly, N Aifaoui, F Chaari
    Springer , 2015
    2015
    Citations: 9
  • Stability Lobes for 1DOF and 2DOF Milling System
    C Azoui, B Benmohammed
    Design and Modeling of Mechanical Systems-II: Proceedings of the Sixth … , 2015
    2015
    Citations: 1
  • Modélisation et simulation du broutement pour l’opération du fraisage en utilisant un modèle de force de coupe prédictive
    A Ben Ali
    Université de Batna 2 , 2012
    2012
  • Cutting forces measurements during discontinuous machining process
    B Benmohammed
    International Journal of Machining and Machinability of Materials 2 12 (1-2 … , 2012
    2012
    Citations: 2
  • CFRP drilling model: fiber orientation influence on mechanical load and delamination
    C Bonnet, B Benmohammed, G Poulachon, J Rech, Y Girard
    Advanced Materials Research 223, 111-121 , 2011
    2011
    Citations: 8
  • Modélisation et simulation/Modelling and simulation Modélisation du contact outil-pièce dans le cas du fraisage des surfaces complexes avec une fraise hémisphérique
    A Benyoucef, B Benmohammed
    Matériaux & Techniques 97, 209-217 , 2009
    2009
  • Etude de l’effet du couplage entre les déformations de l’outil de coupe et de la pièce usinée sur la stabilité de l’opération du tournage
    D Aouiche
    Université de Batna 2 , 2009
    2009
  • Modelisation et simulation du fraisage de profil en utilisant simulink
    F Dendouga
    Université de Batna 2 , 2009
    2009

MOST CITED SCHOLAR PUBLICATIONS

  • Identification des lois d'effort de coupe de tournage en régime dynamique
    B Benmohammed
    Paris, ENSAM , 1996
    1996.0
    Citations: 14
  • Design and Modeling of Mechanical Systems-II: Proceedings of the Sixth Conference on Design and Modeling of Mechanical Systems, CMSM'2015, March 23-25, Hammamet, Tunisia
    M Chouchane, T Fakhfakh, HB Daly, N Aifaoui, F Chaari
    Springer , 2015
    2015.0
    Citations: 9
  • Modélisation de l’effort de coupe dans le cas du fraisage hémisphérique par une approche mécanistique
    A Benyoucef
    Université de Batna 2 , 2007
    2007.0
    Citations: 9
  • CFRP drilling model: fiber orientation influence on mechanical load and delamination
    C Bonnet, B Benmohammed, G Poulachon, J Rech, Y Girard
    Advanced Materials Research 223, 111-121 , 2011
    2011.0
    Citations: 8
  • Évaluation des coefficients dynamiques de coupe
    B Benmohammed, F Lapujoulade
    Première Conférence Internationale Sur la Conception et la Fabrication … , 1996
    1996.0
    Citations: 5
  • Determination of the dynamic cutting force coefficients during orthogonal cutting
    B Benmohammed, F Lapujoulade, A Moisan
    ADVANCES IN MANUFACTURING TECHNOLOGY-CONFERENCE- 14, 303-308 , 2000
    2000.0
    Citations: 4
  • Evaluation of the dynamic cutting force coefficients under dynamic behaviour
    B Benmohammed, F Lapujoulade, A Moisan, H Mazouz, M Assas
    Matériaux & Techniques 93 (9-12), 369-373 , 2005
    2005.0
    Citations: 3
  • Prediction and experimental validation of cutting forces in ball end milling of aluminum 7075-T6 alloy
    M Sifeddine, B Benmohammed, D Schlegel, S Lee-Remond, A Benyoucef
    Advances in Science and Technology. Research Journal 19 (8) , 2025
    2025.0
    Citations: 2
  • Cutting forces measurements during discontinuous machining process
    B Benmohammed
    International Journal of Machining and Machinability of Materials 2 12 (1-2 … , 2012
    2012.0
    Citations: 2
  • Modélisation et simulation de la coupe orthogonale en utilisant un code de calcul par la méthode des éléments finis
    L HIMED
    Université de Batna 2 , 2009
    2009.0
    Citations: 2
  • Stability Lobes for 1DOF and 2DOF Milling System
    C Azoui, B Benmohammed
    Design and Modeling of Mechanical Systems-II: Proceedings of the Sixth … , 2015
    2015.0
    Citations: 1
  • Simulation des effets dynamiques de la coupe sur la stabilité de la coupe: application au fraisage de profil
    C AZOUI
    Université de Batna 2 , 2009
    2009.0
    Citations: 1
  • Modélisation du contact outil-pièce dans le cas du fraisage des surfaces complexes avec une fraise hémisphérique
    A Benyoucef, B Benmohammed
    Matériaux & Techniques 97 (3), 209-217 , 2009
    2009.0
    Citations: 1
  • Évaluation des lois de forces de coupe en régime dynamique en coupe orthogonale (cas du tournage)
    B Benmohammed, A Moisan, F Lapujoulade
    Matériaux & Techniques 94 (2), 171-179 , 2006
    2006.0
    Citations: 1
  • Evolutions des efforts de coupe en simulant la coupe orthogonale
    L HIMED, B BENMOHAMMED
    22ème Congrès Français de Mécanique, Lyon 24 , 0
    Citations: 1
  • Simulation of cutting forces in ball-end milling using mechanistic model: a comparative study of aluminum alloys from the: 2000, 5000, 6000, and 7000 series
    M Sifeddine, B Brahim
    2025.0
  • Study of influence of feed rate and depth of cut on cutting forces in ball end milling of Aluminum alloy 7075-T6: using a mechanistic approach.
    M Sifeddine, B Brahim
    3 rd International Workshop on Structural Mechanics and Materials (IWSMM'24 … , 2024
    2024.0
  • Predicting Cutting Forces for Peripheral Milling Using Oxley Predictive Theory and Johnson-Cook Behavioral Law
    A Benali, B Brahim
    2nd International Conference on Scientific and Innovative Studies (ICSIS'24 … , 2024
    2024.0
  • Obtaining Stability Lobes in High Speed Milling by Using Simulation Methods
    A Cherifa, B Brahim
    2nd International Conference on Scientific and Innovative Studies (ICSIS'24 … , 2024
    2024.0
  • Analyzing the Effects of Cutting Speed on Cutting Forces in Ball End Milling of Aluminum Alloy 6061-T6: A Mechanistic Approach
    M Sifeddine, B Brahim
    2nd International Conference on Scientific and Innovative Studies (ICSIS'24 … , 2024
    2024.0