Dr. Manidipto Mukherjee

RESEARCH INTERESTS

Additive manufacturing; Welding Technology, Material Characterization; Advanced Manufacturing

RECENT SCHOLAR PUBLICATIONS

25 A Critical Review on
D Mukherjee, YK Tiwari, M Mukherjee, H Roy
Advances in Solid-State Welding and Processing of Metallic Materials, 351 2025



Unravelling crack tip damage mechanisms: In-situ tensile assessment of Al-6Zn-2.1 Mg-2Cu alloy strengthened by Ti, Zr, and Sc micro-alloying
D Mukherjee, Y Tiwari, N Mandal, D Qiu, M Mukherjee, MA Easton, H Roy
Engineering Fracture Mechanics 312, 110663 2024



Influence of in-situ hammering on microstructural, mechanical and residual stress behaviour of inconel 718 during wire arc additive manufacturing
M Maity, Y Tiwari, R Manivannan, M Mukherjee
Progress in Additive Manufacturing, 1-13 2024



Investigating the layer-wise arc and melt-pool characteristics of near-substrate wire arc-directed energy deposited NiCrMo-3 alloy using image processing
A Banerjee, Y Tiwari, S Dutta, M Mukherjee, S Das
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of 2024



Grain refinement and morphological control of intermetallic compounds: A comprehensive review
AR Paul, J Dumbre, D Qiu, M Easton, M Mazur, M Mukherjee
Current Opinion in Solid State and Materials Science 33, 101200 2024



Investigating the wear resistance of AISI 410/AISI 2205 hybrid weld cladding on annealed EN 8 medium carbon steel
M Mukherjee, P Sarkar, S Barman, PK Mallisetty, V Paleu, S Bhaumik
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of 2024



Enhanced prediction and optimization of WEDM for titanium alloy (grade 5) with hybrid artificial neural network based meta-heuristics
S Biswas, AR Paul, Y Singh, M Mukherjee
International Journal on Interactive Design and Manufacturing (IJIDeM), 1-21 2024



Investigating the influence of post-deposition heat treatment (PDHT) on the characteristic changes in wire arc additively manufactured 410 martensitic stainless steel thin-wall
A Sil, Y Tiwari, D Mukherjee, S Nandi, M Mukherjee
Materials Today Communications 40, 110039 2024



Influence of heat input on bead geometry, microstructure and hardness characteristics of dissimilar 410 martensitic stainless steel weld deposits on 304L substrate
A Sil, Y Tiwari, S Mandal, M Mukherjee, A Samanta, R Porwal
Advances in Materials and Processing Technologies, 1-23 2024



Review of current challenges in the implementation of WAAM for Ti-6Al-4 V alloys
S Yadav, M Mukherjee, D Singh
The International Journal of Advanced Manufacturing Technology 133 (5), 2103 2024



Numerical analysis of stress and distortion in bulk deposited structures of Inconel 625 alloy: Influence of deposition strategies
Y Tiwari, A Datta, E Chandrasekar, M Mukherjee, S Das, D Chatterjee
CIRP Journal of Manufacturing Science and Technology 51, 293-312 2024



Influence of deposition mode on microstructural and mechanical properties of wire arc additive manufactured 308L stainless steel structures
AR Paul, M Mukherjee, D Singh, M Raja, MK Mondal
Journal of Materials Engineering and Performance 33 (14), 7345-7367 2024



Effect of Heat Treatment on the Material Property and Cell Viability of Wire Arc Additively Manufactured Ti6Al4 V
AR Paul, S Singh, J Hirwani, S Yadav, C Dekiwadia, M Mukherjee, ...
ACS Applied Bio Materials 7 (5), 3096-3109 2024



Development of water recycling based mechanical drain cleaning system
AR Paul, SA Babalola, AK Yadav, M Mukherjee, D Singh
Water Practice & Technology 19 (5), 2045-2059 2024



Unified supervised learning and optimization technique for wire electrical discharge machining of various grades of alloys: stochastic algorithm combined neural network approach
S Biswas, Y Singh, M Mukherjee
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of 2024



Evaluation of Ca-alloyed and HAp-reinforced magnesium matrix surface composite properties developed by friction stir processing
M Mukherjee, R Mukherjee, A Rahul, D Das, S Datta
Materials and Manufacturing Processes 39 (6), 778-786 2024



Hybrid Welding Technologies
AR Paul, M Mukherjee
Advanced Joining Technologies, 152-168 2024



Nanomechanical analysis of friction welded similar PEEK/aluminum nanocomposites: Effect of metal particle reinforcement
S Senkathir, S Pramanik, M Mukherjee
Polymer Composites 45 (4), 3839-3852 2024



Friction welding joint analysis of dissimilar nanocomposites: PEEK/aluminum to PEEK/titanium
S Senkathir, S Pramanik, M Mukherjee
Journal of Applied Polymer Science 141 (10), e55046 2024



Investigating the influence of various tool path trajectories on the anisotropic behaviour of bulk NiCrMo-3 alloy fabrication by WADED process
Y Tiwari, S Nandi, R Manivannan, D Chatterjee, M Mukherjee, ...
Materials Characterization 209, 113742 2024

MOST CITED SCHOLAR PUBLICATIONS

Comparative study of pulsed Nd: YAG laser welding of AISI 304 and AISI 316 stainless steels
N Kumar, M Mukherjee, A Bandyopadhyay
Optics & Laser Technology 88, 24-39 2017
Citations: 125



Influence of Heat Input on Martensite Formation and Impact Property of Ferritic-Austenitic Dissimilar Weld Metals
M Mukherjee, K Pal, Tapan
Journal of Materials Science & Technology 28 (4), 343-352 2012
Citations: 73



Microstructure, Texture, and Mechanical Property Analysis of Gas Metal Arc Welded AISI 304 Austenitic Stainless Steel
S Saha, M Mukherjee, TK Pal
Journal of Materials Engineering and Performance 24 (3), 1125-1139 2015
Citations: 66



Study on laser welding of austenitic stainless steel by varying incident angle of pulsed laser beam
N Kumar, M Mukherjee, A Bandyopadhyay
Optics & Laser Technology 94, 296-309 2017
Citations: 65



Effect of Double-Pulsed Gas Metal Arc Welding (DP-GMAW) Process Variables on Microstructural Constituents and Hardness of Low Carbon Steel Weld Deposits
M Sen, M Mukherjee, SK Singh, TK Pal
Journal of Manufacturing Processes 31, 424–439 2018
Citations: 64



Evaluation of Correlations between DP-GMAW Process Parameters and Bead Geometry
Mainak Sen, Manidipto Mukherjee, Tapan Kumar Pal
Welding Journal 94 (8), 265s-279s 2015
Citations: 62



A critical review on the properties of intermetallic compounds and their application in the modern manufacturing
AR Paul, M Mukherjee, D Singh
Crystal research and technology 57 (3), 2100159 2022
Citations: 56



Influence of curing condition on thermo-mechanical properties of fly ash reinforced epoxy composite
A Pattanaik, M Mukherjee, SB Mishra
Composites Part B: Engineering 176, 107301 2019
Citations: 48



Development of a Direct Correlation of Bead Geometry, Grain Size and HAZ Width with the GMAW Process Parameters on Bead-on-plate Welds of Mild Steel
DK Adak, M Mukherjee, TK Pal
Transactions of the Indian Institute of Metals 68 (5), 839–849 2015
Citations: 46



Evaluation of microstructural and mechanical properties of Fe-16Cr-1Ni-9Mn-0.12 N austenitic stainless steel welded joints
M Mukherjee, TK Pal
Materials Characterization 131, 406-424 2017
Citations: 32



Influence of modes of metal transfer on grain structure and direction of grain growth in low nickel austenitic stainless steel weld metals
M Mukherjee, S Saha, TK Pal, P Kanjilal
Materials Characterization 102, 9-18 2015
Citations: 29



Effect of bidirectional and switchback deposition strategies on microstructure and mechanical properties of wire arc additive manufactured Inconel 625
M Raja, Y Tiwari, M Mukherjee, B Maji, A Chatterjee
The International Journal of Advanced Manufacturing Technology, 1-17 2022
Citations: 28



Role of Microstructural Constituents on Surface Crack Formation During Hot Rolling of Standard and Low Nickel Austenitic Stainless Steels
M Mukherjee, TK Pal
Acta Metallurgica Sinica (English Letters) 26 (2), 206-216 2013
Citations: 28



Effect of Grain Boundary Precipitation and δ-ferrite formation on Surface Defect of Low Nickel Austenitic Stainless Steels
S Das, M Mukherjee, TK Pal
Engineering Failure Analysis 54 (4), 90-102 2015
Citations: 24



Forecasting of process parameters using machine learning techniques for wire arc additive manufacturing process
R Sharma, AR Paul, M Mukherjee, SRK Vadali, RK Singh, AK Sharma
Materials Today: Proceedings 80, 248-253 2023
Citations: 23



A comparative evaluation of the microstructural characteristics of L-DED and W-DED processed 316L stainless steel
T Das, M Mukherjee, D Chatterjee, SK Samanta, AK Lohar
CIRP Journal of Manufacturing Science and Technology 40, 114-128 2023
Citations: 22



Influence of Mode of Metal Transfer on Microstructure and Mechanical Properties of Gas Metal Arc-Welded Modified Ferritic Stainless Steel
M Mukherjee, TK Pal
Metallurgical and Materials Transactions A 43 (6), 1791-1808 2012
Citations: 22



Distribution of turbulent energy in combined wave current flow
PK Raushan, SK Singh, K Debnath, M Mukherjee, BS Mazumder
Ocean Engineering 167, 310-316 2018
Citations: 17



Influence of inter-layer rotation in parallel deposition strategies on the microstructure, texture, and mechanical behaviour of Inconel-625 during directed energy deposition
Y Tiwari, M Mukherjee, D Chatterjee, R Manivannan
Materials Characterization 197, 112711 2023
Citations: 16



Effect of micro-alloying on the characteristics of as-cast Al-Zn-Cu-Mg-X alloy with varying Cu and Zn
D Mukherjee, M Mukherjee, N Mandal, SK Samanta, A Maiti
Materials Today Communications 34, 105445 2023
Citations: 16