Aravindhan Alagarsamy

@kluniversity.in

Associate Dean - Academics & Associate Professor, Department of ECE
Koneru Lakshmaiah Education Foundation

Aravindhan Alagarsamy
Dr. Aravindhan Alagarsamy is currently working as an Associate Professor with the Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation. He brought three years of industrial experience as a Design Engineer in the Electronic Design Automation (EDA) Industry, along with fourteen years of teaching experience at higher education institutions.
He is presently the Group Head of the Microelectronics Research Group (MERG) and concurrently holds the position of Associate Dean (Academics). He obtained his Doctor of Philosophy in Networks-on-Chip from the National Institute of Technology, Tiruchirappalli. He has achieved significant academic and intellectual contributions, including 26 publications indexed in both the Science Citation Index (SCI) and Scopus databases, five patent publications (with one granted internationally), and four book chapters published by esteemed academic presses such as CRC Press, Springer, and Wiley. As a co-principal investig

EDUCATION

Ph. D.,

RESEARCH, TEACHING, or OTHER INTERESTS

Electrical and Electronic Engineering, Computer Networks and Communications, Modeling and Simulation
40

Scopus Publications

267

Scholar Citations

8

Scholar h-index

8

Scholar i10-index

Scopus Publications

RECENT SCHOLAR PUBLICATIONS

  • Performance evaluation of eco-friendly water hyacinth fiber-reinforced epoxy composites for lightweight protective helmet shell applications
    Y Subagyo, S Palanisamy, SA Albab, DF Fitriyana, Harianingsih, ...
    Scientific Reports , 2026
    2026
  • Experimental investigation of turning parameters of AISI 304 stainless steel optimized using Taguchi and ANFIS models based on CSR
    C Subramaniam, M Velusamy, SP Kumarasamy, S Palanismy, ...
    The International Journal of Advanced Manufacturing Technology, 1-35 , 2026
    2026
  • Error-Resilient Quantum Circuit Design of Hybrid Approximate-Exact 5: 2 Compressors for Arithmetic Applications
    SV Manda, A Alagarsamy, E Ravindran, YC Hu, GC Cardarilli, SB Ko
    2026
  • Novel method to correlate acoustic emission and cutting force during machining of aluminium-5052Through ceramic (ZTA) inserts
    BK Singh, G Selvaraj, R Thirumalaisamy, M Karuppusamy, S Palanisamy, ...
    The International Journal of Advanced Manufacturing Technology, 1-13 , 2026
    2026
  • Hardware Acceleration with LWECC Approach on Memory and Router Optimization in Communication Applications
    R Goli, A Alagarsamy, G Carlo Cardarilli
    Chips 5 (1), 7 , 2026
    2026
  • Experimental study and optimization of EDM process parameters for cryogenically treated aluminum metal matrix composites using RSM, GRA, and ANFIS modeling
    V Mohankumar, SP Kumarasamy, S Palanisamy, M Jayamani, ...
    The International Journal of Advanced Manufacturing Technology, 1-29 , 2026
    2026
  • Mechanical, Morphological and Interfacial Characterization of Peanut Shell Powder Modified Milkweed-Aristida hystrix Hybrid Fiber Reinforced Epoxy Composites
    M Karuppusamy, S Palanisamy, S Balakrishnamoorthi, AR Rajendran, ...
    RSC Sustainability , 2026
    2026
  • Thermogravimetric and physicochemical characterization of waste tire–coconut shell blends as potential renewable energy feedstock
    S Anis, S Sukarni, A Azeez, AI Siswantara, S Maulana, DF Fitriyana, ...
    RSC Sustainability 4 (1), 537-550 , 2026
    2026
    Citations: 1
  • Advancing IoT edge device security: A novel approach integrating lightweight virtualization and trusted execution environments with performance optimization
    R Goli, A Alagarsamy, K Sureshkumar, S Mahilmaran, GC Cardarilli
    An International Journal of Optimization and Control: Theories … , 2025
    2025
  • Mechanical and Thermal Behavior Analysis of Chicken Feather/Sesbania grandiflora Fibers-based Hybrid Epoxy Composites.
    SK Paramasivam, M Marimuthu, A Sakthivel, J Rajasekar, S Palanisamy, ...
    BioResources 20 (4) , 2025
    2025
    Citations: 3
  • Impact of surface roughness and preheat temperature on fecrbmnsi coating properties prepared by the twin wire Arc spray method
    DF Fitriyana, WD Puspitasari, S Palanisamy, M Muhadzdzib, S Anis, ...
    Scientific Reports 15 (1), 24610 , 2025
    2025
    Citations: 5
  • A balanced computational approach for multilevel VLSI circuit partitioning strategy with bat algorithm.
    VP Kumar, A Alagarsamy
    AIMS Electronics & Electrical Engineering 9 (3) , 2025
    2025
  • Reliable Synchronous and Asynchronous Counter Design in QCA
    YSSGS Saketha, A Alagarsamy, M Raj, GC Cardarilli, SB Ko
    Journal of Circuits, Systems and Computers 34 (04), 2550087 , 2025
    2025
    Citations: 1
  • A Constructive High-Speed Crypto-mining Approach with Dual SHA-256 on an FPGA
    VP Kumar, A Alagarsamy
    2025 38th International Conference on VLSI Design and 2024 23rd … , 2025
    2025
  • Textile Waste–Based Eco‐Friendly Composite Materials for Drone Frame Applications: A Review
    J Manalu, KAA Manalu, DF Fitriyana, N Alamsyah, S Palanisamy, ...
    International Journal of Polymer Science 2025 (1), 9925047 , 2025
    2025
  • Eco-friendly synthesis of ZnO nanoparticles using Delonix elata extract with enhanced antibacterial activity
    J Nanthakumar, Y Palanisamy, S Palanisamy, M Karuppusamy, R Raja, ...
    RSC Advances 15 (46), 39305-39313 , 2025
    2025
    Citations: 7
  • Mechanical performance analysis of a 3D printing-based transtibial prosthetic socket against the gait cycle using the finite element method
    DF Fitriyana, S Palanisamy, YS Wicaksana, S Anis, JP Siregar, T Cionita, ...
    RSC advances 15 (30), 24150-24166 , 2025
    2025
    Citations: 2
  • Investigation of Toxicity in Textile Materials from Natural and Synthetic-based Polymers Utilizing Bioassay Performances.
    E Pekhtasheva, E Mastalygina, I Leonova, S Palanisamy, A Alagarsamy, ...
    BioResources 20 (1) , 2025
    2025
    Citations: 5
  • Economical aspects of agro-industrial waste for bio-filler production
    S Palanisamy, P Kumar, GS Deshmukh, A Alagarsamy, N Yadav
    Sustainable Fillers/Plasticizers for Polymer Composites, 461-478 , 2025
    2025
    Citations: 1
  • Antibacterial Performance of Biodegradable Polymer and Hazelnut Husk Flour Antibacterial Biofilm with Silver Nanoparticles.
    N Ayrilmis, E Yurttas, N Tetik, F Özdemir, S Palanisamy, A Alagarsamy, ...
    BioResources 19 (4) , 2024
    2024
    Citations: 8

MOST CITED SCHOLAR PUBLICATIONS

  • Design and analysis of text document clustering using salp swarm algorithm
    M Ponnusamy, P Bedi, T Suresh, A Alagarsamy, R Manikandan, ...
    The Journal of Supercomputing 78 (14), 16197-16213 , 2022
    2022
    Citations: 30
  • A self-adaptive mapping approach for network on chip with low power consumption
    A Alagarsamy, L Gopalakrishnan, S Mahilmaran, SB Ko
    IEEE Access 7, 84066-84081 , 2019
    2019
    Citations: 26
  • Traffic monitoring in smart cities using internet of things assisted robotics
    M Ponnusamy, A Alagarsamy
    Materials Today: Proceedings 81, 290-294 , 2023
    2023
    Citations: 25
  • Tunnel based intra network controller using NGROK framework for smart cities
    K Praghash, VDS Eswar, JY Roy, A Alagarsamy, S Arunmetha
    2021 5th international conference on electronics, communication and … , 2021
    2021
    Citations: 19
  • KBMA: A knowledge‐based multi‐objective application mapping approach for 3D NoC
    A Alagarsamy, L Gopalakrishnan, SB Ko
    IET Computers & Digital Techniques 13 (4), 324-334 , 2019
    2019
    Citations: 19
  • SAT: a new application mapping method for power optimization in 2D—NoC
    A Alagarsamy, L Gopalakrishnan
    2016 20th International Symposium on VLSI Design and Test (VDAT), 1-6 , 2016
    2016
    Citations: 18
  • Cluster based application mapping strategy for 2D NoC
    A Aravindhan, S Salini, G Lakshminarayanan
    Procedia Technology 25, 505-512 , 2016
    2016
    Citations: 11
  • SaHNoC: an optimal energy efficient hybrid networks-on-chip architecture: A. Alagarsamy et al.
    A Alagarsamy, S Mahilmaran, L Gopalakrishnan, SB Ko
    The Journal of Supercomputing 79 (6), 6538-6559 , 2023
    2023
    Citations: 10
  • Antibacterial Performance of Biodegradable Polymer and Hazelnut Husk Flour Antibacterial Biofilm with Silver Nanoparticles.
    N Ayrilmis, E Yurttas, N Tetik, F Özdemir, S Palanisamy, A Alagarsamy, ...
    BioResources 19 (4) , 2024
    2024
    Citations: 8
  • FRDS: An efficient unique on-Chip interconnection network architecture
    A Alagarsamy, S Mahilmaran, L Gopalakrishnan, SB Ko
    Integration 87, 90-103 , 2022
    2022
    Citations: 8
  • Eco-friendly synthesis of ZnO nanoparticles using Delonix elata extract with enhanced antibacterial activity
    J Nanthakumar, Y Palanisamy, S Palanisamy, M Karuppusamy, R Raja, ...
    RSC Advances 15 (46), 39305-39313 , 2025
    2025
    Citations: 7
  • Design and implementation of hybrid (radix-8 Booth and TRAM) approximate multiplier using 15-4 approximate compressors for image processing application
    S Immareddy, A Sundaramoorthy, A Alagarsamy
    Journal of Real-Time Image Processing 21 (2), 50 , 2024
    2024
    Citations: 7
  • Adaptive FIR filter design with approximate adder and hybridized multiplier for efficient noise eradication in sensor nodes
    S Immareddy, A Sundaramoorthy, A Alagarsamy
    ECS Journal of Solid State Science and Technology 12 (9), 097002 , 2023
    2023
    Citations: 7
  • Verification of SoC using advanced verification methodology
    P Pamula, DP Gorthy, PS Ngangbam, A Alagarsamy
    Engineering Proceedings 34 (1), 12 , 2023
    2023
    Citations: 6
  • MBA: A new cluster based bandwidth and power aware mapping for 2D NoC
    A Alagarsamy, L Gopalakrishnan
    2018 International Conference on Circuits and Systems in Digital Enterprise … , 2018
    2018
    Citations: 6
  • Impact of surface roughness and preheat temperature on fecrbmnsi coating properties prepared by the twin wire Arc spray method
    DF Fitriyana, WD Puspitasari, S Palanisamy, M Muhadzdzib, S Anis, ...
    Scientific Reports 15 (1), 24610 , 2025
    2025
    Citations: 5
  • Investigation of Toxicity in Textile Materials from Natural and Synthetic-based Polymers Utilizing Bioassay Performances.
    E Pekhtasheva, E Mastalygina, I Leonova, S Palanisamy, A Alagarsamy, ...
    BioResources 20 (1) , 2025
    2025
    Citations: 5
  • Outlier detection in additive manufacturing using novel machine learning algorithm
    C Dutta, N Nagarajan, ZA Adhoni, SK Dhandapany, A Alagarsamy, ...
    The International Journal of Advanced Manufacturing Technology, 1-11 , 2023
    2023
    Citations: 5
  • Deep learning-based sustainable subsurface anomaly detection in Barker-coded thermal wave imaging
    M Parvez, AB Mohammad, VSR Ghali, GCS Yadav, GT Vesala, ...
    The International Journal of Advanced Manufacturing Technology 127 (7), 3625 … , 2023
    2023
    Citations: 5
  • High Speed Approximate Carry Speculative Adder in Error Tolerance Applications.
    AK Gottem, A Sundaramoorthy, A Alagarsamy
    Int. J. Comput. 21 (3), 383-390 , 2022
    2022
    Citations: 5