MANCHALA MADHUSUDHANPRASAD

@vidwan.inflibnet.ac.in

Assistant Professor and Department of Mechanical Engineering, UCEK, JNTUK
University college of engineering kakinada

MANCHALA MADHUSUDHANPRASAD


                  Download Compact PDF  
https://researchid.co/msprasad

RESEARCH, TEACHING, or OTHER INTERESTS

Mechanical Engineering, Industrial and Manufacturing Engineering
2

Scopus Publications

3

Scholar Citations

1

Scholar h-index

Scopus Publications

  • Atenuarea impactului asupra mediului în motoarele diesel utilizând apă emulsionată în combustibil diesel amestecată cu nanoparticule de Al2O3
    Madusudanprasa Manchala, Abshalomu Yallamati, Dinesh Revu, Harish Babu Bachina, Bala Satya Sreekara Reddy Mule
    Problems of the Regional Energetics, 2026
    The primary objective of this work is to conduct an in-depth investigation into the performance, combustion, and emission characteristics of a diesel engine using Water-in-Diesel Emulsions (WiDE) with alumina oxide (Al2O3) nanoparticles to reduce harmful pollutants and enhance efficiency amid increasingly stringent environmental regulations. Emulsified fuels were prepared as containing 5%, 10%, and 15% water by volume. Furthermore, 100 ppm of Al2O3 nanoparticles were uniformly dispersed in the blends to enhance atomization and improve combustion characteristics. Engine testing was carried out from no load to full load to assess the performance, combustion behavior, and emission characteristics of the prepared fuel blends. The most important results obtained from this research show that the WiDE blends give higher brake thermal efficiency and significantly lower emissions with respect to diesel. Among all, the best behavior was shown by WiDE10, which showed a 7.14% increase in brake thermal efficiency and reductions in HC by 50.00%, CO by 16.67%, NOX by 66.67%, and smoke by 46.88%. In combustion analysis, it was observed that diesel shows a peak pressure of 62.74 bar at 366°CA, whereas WiDE blends produce smoother combustion with a lower heat release rate due to water-induced micro-explosions. The importance of the obtained results is to demonstrate that the synergistic effects of water emulsification and Al₂O₃ nanoparticles enhance the processes of atomization and reduce peak temperatures, thus allowing cleaner comb
  • Effect of Co-addition of Sn, Traces of RE and Ca on the Mechanical and Micro Structural Properties of As-cast AZ80 Alloy
    Madhusudhanprasad MANCHALA, Ramachandra Raju VEGESNA
    Medziagotyra, 2024
    In this study, the effect of co-addition of tin (0, 6 and 9 wt.%), cerium (0, 0.3 and 0.6 wt.%), gadolinium (0, 0.6 and 0.9 wt.%) and calcium (0, 0.6 and 0.9 wt.%) on the mechanical and microstructural properties of AZ80 magnesium alloy is investigated. The results indicate that the mechanical properties are improved for all the as-cast alloys when compared to base alloy except for one alloy which is due to the presence of Mg-Sn-Ca phase in high volume fraction. Also, it is found that the existence of Al2Ca, Mg2Ca, Al2RE, MgSnRE and Mg2Sn phases have a significant impact on the mechanical and microstructural characteristics of the as-cast AZ80 alloys. It is observed that without the addition of Sn content, the best room temperature tensile properties are obtained for the alloy containing 1.5 wt.% of RE and 0.9 wt.% of Ca. With the addition of Sn, it is found that the best room temperature tensile properties are obtained for the alloy containing 6 wt.% of Sn, 0.9 wt.% of RE and 0.5 wt.% of Ca.

RECENT SCHOLAR PUBLICATIONS

  • Environmental Impact Mitigation in Diesel Engines Using Emulsified Water-in-Diesel Fuel Blended with Al₂O₃ Nanoparticles
    D Dr M Madusudanprasad
    PROBLEMS of the REGIONAL ENERGETICS 69 (1), 1-9 , 2026
    2026
    Citations: 1
  • A Study on the influence of Sn and Heat treatment on the Mechanical and Micro structural properties of Magnesium Alloy
    DM Madusudanprasad
    International Conference on Advances in Materials, Design and Manufacturing , 2025
    2025
  • An experimental study on the influence of RE & Ca on the mechanical and microstructural properties of as cast Magnesium alloy
    DM Madusudanprasad
    International Conference on Advances in Materials, Design and Manufacturing , 2025
    2025
  • A Study on the effect of SiC and graphite on the mechanical properties of Stir cast Al alloy
    DM Madusudanprasad
    International Conference on Advances in Materials, Design and Manufacturing , 2025
    2025
  • Noise Cancellation in Speech Signa! Using Least Mean Square Algorithms
    DMM Dr B T Krishna
    International Conference on Green Energy, Computing and lntelligent … , 2025
    2025
  • Numerical Investigation on Thermohydraulic Performance of Semi Wavy Micro Channel Inserted With Different Fin Shapes Using Water, Ethylene Glycol-Based Nano Fluids
    DM Madusudanprasad
    Global Journal of Engineering Innovations & Interdisciplinary Research 5 (6 … , 2025
    2025
  • Novel fractional order sinusoidal oscillators using operational trans resistance amplifier
    BT Krishna, V Kakollu, MM Prasad
    TELKOMNIKA (Telecommunication Computing Electronics and Control) 23 (6 … , 2025
    2025
  • Investigating Optimal Laser cladding parameters for SS316L substrate with stellite6 and stellite21 powders
    RD Dr M Madusudanprasad, Dr B L Manasa, N Prathiba
    International conference on Advances in Aerospace and Navigation systems … , 2025
    2025
  • Optimization of Laser welding process parameters of SS316 & Inconel 625 dissimilar weld using taguchi method
    RD Dr M Madusudanprasad, Dr B L Manasa, G Hemanth
    International conference on Advances in Aerospace and Navigation systems … , 2025
    2025
  • Optimization of drilling process parameters to enhance MRR and Surface roughness of SS410 components using Taguchi, RSM and Ann-Ga
    BSR Dr M Madusudanprasad
    International Conference on Recent Advances in Engineering, Technology and … , 2025
    2025
  • An experimental investigation on free vibrational analysis of Natural fibre Hybrid composite plates and fibre metal laminate composite plate
    DM Madusudanprasad
    International journal of engineering research & technology 14, 1-10 , 2025
    2025
  • A Study on the Effect of Sic and Ticn Reinforcements on Mechanical and Microstructural Properties of Friction Stirred Al 6061 Alloy
    DM Madusudanprasad
    Tuijin Jishu/Journal of Propulsion Technology 46 (4), 1695-1709 , 2025
    2025
  • Optimization of process parameters to improve Surface finish, MRR and dimensional accuracy while drilling SS410
    DM Madusudanprasad
    Tuijin Jishu/Journal of Propulsion Technology 46 (4), 1363-1373 , 2025
    2025
  • Effect of co-addition of Sn, traces of RE and Ca on the mechanical and micro structural properties of As-cast AZ80 Alloy
    M Manchala, RR Vegesna
    Materials Science 30 (3), 303-309 , 2024
    2024
    Citations: 2
  • AN EXPERIMENTAL INVESTIGATION ON THE INFLUENCE OF Sn ADDITION AND AGING TIME ON THE MECHANICAL AND MICRO STRUCTURAL PROPERTIES OF AZ80-1.2 RE MAGNESIUM ALLOY
    DVRR Dr M Madhusudhanprasad
    I Manager's Journal on Material science , 2023
    2023
  • Optimization of Wear Parameters of AZ80-Sn-RE-Ca Alloy on Pin on Disk Tribometer Using Grey Relation Analysis and Taguchi MethodOptimization of Wear Parameters of AZ80-Sn-RE-Ca …
    DVRR Dr M Madhusudhanprasad
    Journal of Propulsion Technology 44 (4), 7484-7498 , 2023
    2023

MOST CITED SCHOLAR PUBLICATIONS

  • Effect of co-addition of Sn, traces of RE and Ca on the mechanical and micro structural properties of As-cast AZ80 Alloy
    M Manchala, RR Vegesna
    Materials Science 30 (3), 303-309 , 2024
    2024
    Citations: 2
  • Environmental Impact Mitigation in Diesel Engines Using Emulsified Water-in-Diesel Fuel Blended with Al₂O₃ Nanoparticles
    D Dr M Madusudanprasad
    PROBLEMS of the REGIONAL ENERGETICS 69 (1), 1-9 , 2026
    2026
    Citations: 1
  • A Study on the influence of Sn and Heat treatment on the Mechanical and Micro structural properties of Magnesium Alloy
    DM Madusudanprasad
    International Conference on Advances in Materials, Design and Manufacturing , 2025
    2025
  • An experimental study on the influence of RE & Ca on the mechanical and microstructural properties of as cast Magnesium alloy
    DM Madusudanprasad
    International Conference on Advances in Materials, Design and Manufacturing , 2025
    2025
  • A Study on the effect of SiC and graphite on the mechanical properties of Stir cast Al alloy
    DM Madusudanprasad
    International Conference on Advances in Materials, Design and Manufacturing , 2025
    2025
  • Noise Cancellation in Speech Signa! Using Least Mean Square Algorithms
    DMM Dr B T Krishna
    International Conference on Green Energy, Computing and lntelligent … , 2025
    2025
  • Numerical Investigation on Thermohydraulic Performance of Semi Wavy Micro Channel Inserted With Different Fin Shapes Using Water, Ethylene Glycol-Based Nano Fluids
    DM Madusudanprasad
    Global Journal of Engineering Innovations & Interdisciplinary Research 5 (6 … , 2025
    2025
  • Novel fractional order sinusoidal oscillators using operational trans resistance amplifier
    BT Krishna, V Kakollu, MM Prasad
    TELKOMNIKA (Telecommunication Computing Electronics and Control) 23 (6 … , 2025
    2025
  • Investigating Optimal Laser cladding parameters for SS316L substrate with stellite6 and stellite21 powders
    RD Dr M Madusudanprasad, Dr B L Manasa, N Prathiba
    International conference on Advances in Aerospace and Navigation systems … , 2025
    2025
  • Optimization of Laser welding process parameters of SS316 & Inconel 625 dissimilar weld using taguchi method
    RD Dr M Madusudanprasad, Dr B L Manasa, G Hemanth
    International conference on Advances in Aerospace and Navigation systems … , 2025
    2025
  • Optimization of drilling process parameters to enhance MRR and Surface roughness of SS410 components using Taguchi, RSM and Ann-Ga
    BSR Dr M Madusudanprasad
    International Conference on Recent Advances in Engineering, Technology and … , 2025
    2025
  • An experimental investigation on free vibrational analysis of Natural fibre Hybrid composite plates and fibre metal laminate composite plate
    DM Madusudanprasad
    International journal of engineering research & technology 14, 1-10 , 2025
    2025
  • A Study on the Effect of Sic and Ticn Reinforcements on Mechanical and Microstructural Properties of Friction Stirred Al 6061 Alloy
    DM Madusudanprasad
    Tuijin Jishu/Journal of Propulsion Technology 46 (4), 1695-1709 , 2025
    2025
  • Optimization of process parameters to improve Surface finish, MRR and dimensional accuracy while drilling SS410
    DM Madusudanprasad
    Tuijin Jishu/Journal of Propulsion Technology 46 (4), 1363-1373 , 2025
    2025
  • AN EXPERIMENTAL INVESTIGATION ON THE INFLUENCE OF Sn ADDITION AND AGING TIME ON THE MECHANICAL AND MICRO STRUCTURAL PROPERTIES OF AZ80-1.2 RE MAGNESIUM ALLOY
    DVRR Dr M Madhusudhanprasad
    I Manager's Journal on Material science , 2023
    2023
  • Optimization of Wear Parameters of AZ80-Sn-RE-Ca Alloy on Pin on Disk Tribometer Using Grey Relation Analysis and Taguchi MethodOptimization of Wear Parameters of AZ80-Sn-RE-Ca …
    DVRR Dr M Madhusudhanprasad
    Journal of Propulsion Technology 44 (4), 7484-7498 , 2023
    2023