Dr. Abdul Kuddus is a Senior Researcher at Ritsumeikan Global Innovation Research Organization (R-GIRO), Ritsumeikan University, Japan. He received his Ph.D. in Functional Materials Science from Saitama University, Japan, in 2022, and his B.Sc. and M.Sc. in Applied Physics and Electronic Engineering from the University of Rajshahi, Bangladesh.
His research focuses on 2D semiconductors, high-k dielectrics, thin-film growth, and advanced electronic and photonic devices, including MOSFETs, solar cells, photodetectors, and sensors. He also has expertise in photovoltaic and semiconductor device modeling using SCAPS-1D, AFORS-HET, AMPS-1D, wxAMPS, and DFT-based simulation tools.
Dr. Kuddus has authored over 50 scholarly publications and presented his research at numerous international conferences across Asia, Europe, and North America.
EDUCATION
2022-Ph.D. in Functional Materials Science, Graduate School of Science and Engineering, Saitama University, Japan
2018-M.Sc. Engineering in applied physics and electronic engineering, University of Rajshahi, Bangladesh.
2016-B.Sc. Engineering in applied physics and electronic engineering, University of Rajshahi, Bangladesh.
RESEARCH, TEACHING, or OTHER INTERESTS
Electrical and Electronic Engineering, Industrial and Manufacturing Engineering
53
Scopus Publications
2682
Scholar Citations
25
Scholar h-index
32
Scholar i10-index
Scopus Publications
Conformal deposition of amorphous TiOx in high-aspect-ratio trenches by atmospheric-pressure mist chemical vapor deposition Abdul Kuddus, Hajime Shirai Journal of Vacuum Science and Technology A Vacuum Surfaces and Films, 2026 We demonstrate conformal deposition of amorphous TiOx films into high-aspect-ratio Si trenches by tubular furnace type atmospheric-pressure mist chemical vapor deposition (mist-CVD) using titanium diisopropoxide bis(acetylacetonate) [Ti(acac)2(OiPr)2] precursor dissolved in methanol solvent. Intermittent mist feeding, substrate positioning, and mesh electrode biasing yielded >90% step coverage in aspect ratio = 10–25 trenches at 200–300 °C. The resulting films were smooth (refractive index n ≈ 2.2 at 550 nm, RMS <0.61 nm). Thus, mist-CVD combines high uniformity and low cost with excellent conformality governed by droplet infiltration and electrostatic guidance, establishing it as a scalable technique for conformal metal oxide thin film deposition in high-aspect-ratio structures relevant to microelectronics and energy storage devices.
Machine learning-aided modeling and absorption optimization in stacked-absorber heterojunction solar cells Kazi Abrar Shafin, Md Alamin Hossain Pappu, Ahnaf Tahmid Abir, Abdul Kuddus, Shinichiro Mouri, Jaker Hossain Journal of Physics D Applied Physics, 2026 Achieving superior light harvesting in stacked-absorber heterojunction solar cells requires precise electronic and optical alignment between adjacent absorber layers. This necessity stems from the complex, non-linear interdependence among key material parameters including bandgap ( E g ), electron affinity ( E a ), and effective density of states ( N C , N V ) that collectively dictate carrier generation, transport, and absorptive efficiency. In this work, we integrate machine-learning (ML) models with conventional SCAPS-1D simulations to identify optimal absorber-layer properties and guide the rational design of stacked architecture. Five ML algorithms are trained for thousands of data combinations followed by parameter optimization for high- E g top absorbers (L1) and low- E g bottom absorbers (L2). Explainable AI (SHAP; SHapley additive explanations) analysis reveals critical design rules, highlighting the roles of density of states, free-carrier concentration, and favorable band offsets, specifically, lower N C and higher N a for L2, and the opposite for L1, with minimal VBM/CBM discontinuity (∼±0.02 eV). Using these ML-derived criteria, we propose high-absorption stacks incorporating ZnSnN 2 (ZTN), CdTe and Cu 3 PSe 4 (CPSe) as L1 and MoTe 2 as L2, with CdS and WSe 2 as window and hole-transport layers. The optimized device structures achieve power-conversion efficiencies, power conversion efficiency of 39.77%, 39.49%, and 39.65% with V OC ≈ 1.15 V, J SC ≈ 39 mA cm −2 , and FF ≈ 86% under ideal interface conditions. We further discuss the physical origins of the enhanced photocurrent and voltage, along with possible key challenges and practical considerations for experimental realization. Thus, this study demonstrates a data-driven hybrid design framework that advances the development of next-generation high-efficiency stacked-absorber solar cells by identifying optimized material properties and device configurations that surpasses single-junction performance limits.
Synergistic role of salt-precursor-derived Cu-doping in solution-processed α-Fe₂O₃ films for enhanced charge separation and photocatalytic efficiency Sanjida Ferdous, Abdul Kuddus, Abu Bakar Md. Ismail Discover Applied Sciences, 2025 Photoelectrochemical (PEC) water splitting exhibited a sustainable route for hydrogen (H₂) production, whereas Iron oxides (α-Fe₂O₃) found one of the most emerging materials as a photoanode owing to its intrinsic narrow bandgap of ~ 2.0 eV and high chemical stability. However, constraints such as poor conductivity and charges transport relative to required hinder its performance. However, substantial doping in α-Fe₂O₃ is the potential strategy to meet these challenges. This study demonstrates the simple growth of α-Fe₂O₃, and Cu-doped thin films from salt-precursors through a sequential steps of chemical mixing, precise spin coating, and subsequent post-heating treatment. This multi-step process ensures uniform film deposition and facilitates the incorporation of Cu into the α-Fe₂O₃ lattice with enhanced structural and functional properties. The systematic Cu incorporation into the α-Fe₂O₃ lattice was confirmed via both FT-IR and EDX analyses, while the enhanced conductivity, and improved charge transport behavior by electrical measurements. Experimental outcomes exhibited tunable wide band gaps, E g of 1.87–1.50 eV, improved visible light absorption with increased density of active sites on the film surface revealed by Cu doping. The PEC performance highlights significant photocurrent boosting with low onset potential, attributed to the catalytic role of Cu in accelerating oxygen evolution reaction (OER) kinetics. These findings reveal solution-processed salt-precursors-derived Cu-doped α-Fe₂O₃ has strong potential as a cost-effective and scalable solution for PEC hydrogen production highlighting the importance of material design and doping strategies in advancing renewable energy technologies.
Microwave-assisted, surfactant-free synthesis of high-purity mesoporous silica from sugarcane bagasse ash for rapid and reusable textile dye removal Md. Suman Islam, Md. Sakib Ahmed, Md. Abdul Kuddus, Samia Tabassum, Abu Bakar Md. Ismail Next Materials, 2025 Nano-sized mesoporous silica is an efficient adsorbent for textile wastewater treatment, yet conventional synthesis methods often rely on surfactants and costly precursors. This study introduces a surfactant-free, microwave-assisted alkali fusion method to synthesize high-purity silica nanoparticles (92.44 wt%) from sugarcane bagasse ash (SCBA), a sustainable agricultural waste source. The synthesized silica exhibits exceptional adsorption performance, achieving maximum Methylene Blue (MB) dye removal efficiencies of 88.33 % in the dark and 92.91 % under UV light, within 30 min at room temperature, outperforming many conventional adsorbents in speed and efficiency. Comprehensive characterization confirmed the material’s partially crystalline structure with a crystallinity index (CI) of 57.83 %, an average crystallite size of 27.12 nm, high surface area (365.93 m²/g), mesoporous structure (pore diameter: 71.95 Å, pore volume: 0.6582 cm³/g), and favorable Si:O stoichiometry (0.50). The nanoparticles retained consistent dye removal efficiency after three reuse cycles, demonstrating excellent durability for wastewater remediation. This work establishes a cost-effective and scalable approach to repurposing agricultural waste into functional silica adsorbents, offering a viable alternative to synthetic mesoporous silica for environmental applications. The synthesis method eliminates surfactant dependency, reduces material-processing complexity, and enhances sustainability, making it a promising route for large-scale industrial wastewater treatment and eco-friendly material development.
Cu2FeSnS4-based heterojunction solar cells with MxOy (M=Cu, Ni)-back surface field layers: Impact of defect density states and recombination Md Shafayet-Ul-Islam, Abdul Kuddus, Md Kabiruzzaman, Syed Farid Uddin Farhad, Abu Kowsar Next Energy, 2025 Copper-based chalcogenide quaternary semiconductors have emerged as promising candidates for next-generation photovoltaic (PV) devices, owing to their unique electronic and photonic properties coupled with environmentally friendly compositions. This study explores the potential of copper-based absorber materials , specifically Cu 2 FeSnS 4 (CFTS), as an absorber in heterojunction solar cells with Cu-/Ni-metal oxides back surface field (BSF) and SnS 2 buffer layers using the SCAPS-1D Simulator. Initially, we assess the performance of CFTS-absorber solar cells and compare the key photovoltaic metrics with those of other Cu-based semiconductors including CuIn x Ga (1- x ) Se 2 (CIGS), Cu 2 ZnSnS 4 (CZTS), Cu 2 CoSnS 4 (CCTS), Cu 2 NiSnS 4 (CNTS), Cu 2 BaSnS 4 (CBTS), Cu 2 MnSnS 4 (CMTS), to identify the most promising absorber. Subsequently, we optimize the layer properties, including active layer thickness, free-carrier concentration, bulk and interface defect density , and carrier recombination in potential CFTS. Further, we examine the impact of defects, and carrier recombination, including radiative, Shockley-Read-Hall (SRH), and Auger recombination . These detailed studies yield improved and competitive photoconversion efficiency, ( PCE ) of 27.31% (compared to 24.68%, without BSF) with open circuit voltage, ( V OC ) of 1.36 V, short-circuit current density, ( J SC ) of 22.28 mA/cm² and fill factor, ( FF ) of 90.47% for Cu 2 O, whereas the PCE of 26.97% with V OC of 1.07 V, J SC of 28.82 mA/cm² and FF of 86.91% for NiO x BSF layer in Au/Mo/BSF(Cu 2 O and NiO x )/CFTS/SnS 2 /ZnMgO/ZnO:Al/Pt configurations under optimized conditions. The enhanced charge separation and carrier collection efficiencies reveal the strong potential of CFTS absorber heterostructures with Cu 2 O/NiO x , SnS 2, and bi-layer ZnMgO/ZnO:Al as BSF, buffer, and window layers, repectively, providing insights and resources for developing high-efficiency CFTS-based photovoltaic devices .
Spatial and Size Distributions of Ti(C5H7O2)2[(CH3)2CHO]2 Mist Particles in a Tubular Furnace for Conformal and Uniform Deposition of Amorphous TiO2 Thin Films Abdul Kuddus, Tomomasa Sato, Kojun Yokoyama, Hajime Shirai Physica Status Solidi A Applications and Materials Science, 2024 The spatial and size distributions of titanium diisopropoxide bisacetylacetonate [(C5H7O2)2[(CH3)2CHO]2, also known as Ti(acac)2(OiPr)2] mist, diluted in CH3OH, are investigated in a tubular furnace using atmospheric‐pressure mist chemical vapor deposition (mist CVD). The focus is on the deposition of amorphous (a)‐TiO2 films with tubular furnace temperature and mesh bias as variables. When the furnace temperature reaches 350 °C, the number density of mist particles increases without significant changes in their size distribution, leading to a higher film deposition rate. Further, the deposition rate and average size of the mist particles with lower adhesion coefficient decrease with increasing spatial distance from the furnace inlet. Furthermore, applying a mesh bias results in an increase in the maximum number density of mist particles with a narrower size distribution; however, the overall film deposition rate decreases. These variations are attributed to the chemical reactivity of the mist precursors produced by pyrolysis and mesh bias. The fine mist precursors, which are strongly charged, coordinate with CH3OH and CHO groups through solvation, enhancing their chemical stability and lifetime. This process yields a dense and rigid a‐TiO2 network, improving the junction properties at the a‐TiO2/c‐Si interface.
Design and Optimization of High-Performance Novel RbPbBr3-Based Solar Cells with Wide-Band-Gap S-Chalcogenide Electron Transport Layers (ETLs) Md. Selim Reza, Md. Ferdous Rahman, Abdul Kuddus, Mustafa K. A. Mohammed, Debashish Pal, Avijit Ghosh, Md. Rasidul Islam, Sagar Bhattarai, Ibrahim A. Shaaban, Mongi Amami ACS Omega, 2024 Inorganic cubic rubidium–lead-halide perovskites have attracted considerable attention owing to their structural, electronic, and unique optical properties. In this study, novel rubidium–lead-bromide (RbPbBr3)-based hybrid perovskite solar cells (HPSCs) with several high-band-gap chalcogenide electron transport layers (ETLs) of In2S3, WS2, and SnS2 were studied by density functional theory (DFT) and using the SCAPS-1D simulator. Initially, the band gap and optical performance were computed using DFT, and these results were utilized for the first time in the SCAPS-1D simulator. Furthermore, the impact of different major influencing parameters, that is, the thickness of the layer, bulk defect density, doping concentration, and defect density of interfaces, including the working temperature, were also investigated and unveiled. Further, a study on an optimized device with the most potential ETL (SnS2) layer was performed systematically. Finally, a comparative study of different reported heterostructures was performed to explore the benchmark of the most recent efficient RbPbBr3-based photovoltaics. The highest power conversion efficiency (PCE) was 29.75% for the SnS2 ETL with Voc of 0.9789 V, Jsc of 34.57863 mA cm–2, and fill factor (FF) of 87.91%, while the PCEs of 21.15 and 24.57% were obtained for In2S3 and WS2 ETLs, respectively. The electron–hole generation, recombination rates, and quantum efficiency (QE) characteristics were also investigated in detail. Thus, the SnS2 ETL shows strong potential for use in RbPbBr3-based hybrid perovskite high-performance photovoltaic devices.
Solution-processed photodetectors Shaikh Khaled Mostaque, Abdul Kuddus, Md. Ferdous Rahman, Ghenadii Korotcenkov, Jaker Hossain Handbook of II Vi Semiconductor Based Sensors and Radiation Detectors Volume 2 Photodetectors, 2023
The effect of aging on the performance of open-air spin coated ZnO-CuO bulk heterojunction thin film solar cells Journal of Optoelectronics and Advanced Materials, 2021
Conformal deposition of amorphous TiOx in high-aspect-ratio trenches by atmospheric-pressure mist chemical vapor deposition A Kuddus, H Shirai Journal of Vacuum Science & Technology A 44 (3) , 2026 2026
III–V compound-based solar cell technologies BK Mondal, A Kuddus, J Hossain Advanced Materials and Technologies for Photovoltaics, 229-261 , 2026 2026
Microwave-assisted, surfactant-free synthesis of high-purity mesoporous silica from sugarcane bagasse ash for rapid and reusable textile dye removal MS Islam, MS Ahmed, MA Kuddus, S Tabassum, ABM Ismail Next Materials 9, 101165 , 2025 2025 Citations: 5
Synergistic role of salt-precursor-derived Cu-doping in solution-processed α-Fe₂O₃ films for enhanced charge separation and photocatalytic efficiency S Ferdous, A Kuddus, AB Md. Ismail Discover Applied Sciences 7 (10), 1075 , 2025 2025 Citations: 1
Cu2FeSnS4-based heterojunction solar cells with MxOy (M= Cu, Ni)-back surface field layers: Impact of defect density states and recombination M Shafayet-Ul-Islam, A Kuddus, M Kabiruzzaman, SFU Farhad, A Kowsar Next Energy 6 (January 2025), 100196 , 2025 2025 Citations: 8
Design and analysis of inorganic tandem architecture with synergistically optimized BaSnS3 top and AgTaS3 bottom perovskite Sub-Cells T Ahmed, SN Shiddique, A Kuddus, M Hossain, S Mouri, J Hossain Solar Energy 284, 113111 , 2024 2024 Citations: 7
Spatial and Size Distributions of Ti (C5H7O2) 2 [(CH3) 2CHO] 2 Mist Particles in a Tubular Furnace for Conformal and Uniform Deposition of Amorphous TiO2 Thin Films A Kuddus, T Sato, K Yokoyama, H Shirai physica status solidi (a) – applications and materials science, 2400383 , 2024 2024 Citations: 3
Investigating of novel inorganic cubic perovskites of A3BX3 (A= Ca, Sr, BP, As, X= I, Br) and their photovoltaic performance with efficiency over 28% A Ghosh, MF Rahman, A Kuddus, MKA Mohammed, MR Islam, ... Journal of Alloys and Compounds 986, 174097 , 2024 2024 Citations: 126
Design and Optimization of High-Performance Novel RbPbBr 3 -Based Solar Cells with Wide-Band-Gap S-Chalcogenide Electron Transport Layers (ETLs) MS Reza, MF Rahman, A Kuddus, MKA Mohammed, D Pal, A Ghosh, ... ACS omega 9 (18), 19824-19836 , 2024 2024 Citations: 70
Unveiling the Structural, Electronic, Optical, Mechanical, and Photovoltaic Properties of Lead-Free Inorganic New Ba 3 MBr 3 (M = As, N, P, and Sb) Perovskites MF Rahman, MH Rahman, A Kuddus, AR Chaudhry, A Irfan Energy & Fuels 38 (8), 7260-7278 , 2024 2024 Citations: 45
Design and optimization of WS 2 based high performance double absorber solar cell JA Mahmud, MF Rahman, MD Haque, A Benami, A Kuddus, A Irfan Physica Scripta 99 (2), 025960 , 2024 2024 Citations: 15
Emerging II-VI wide bandgap semiconductor device technologies A Kuddus, SK Mostaque, S Mouri, J Hossain Physica Scripta 99 (2), 022001 , 2024 2024 Citations: 33
Boosting efficiency above 30% of novel inorganic Ba3SbI3 perovskite solar cells with potential ZnS electron transport layer (ETL) MF Rahman, MNH Toki, A Kuddus, MKA Mohammed, MR Islam, ... Materials Science and Engineering: B 300, 117073 , 2024 2024 Citations: 70
Improving the Efficiency of a New Perovskite Solar Cell Based on Sr 3 SbI 3 by Optimizing the Hole Transport Layer MS Reza, MF Rahman, A Kuddus, MS Reza, MA Monnaf, MR Islam, ... Energy & Fuels 38 (3), 2327-2342 , 2024 2024 Citations: 52
Cu 2 O-Enhanced Back Surface Field Empowers Selenium-Based TiO 2 /Sb 2 Se 3 Thin Film Solar Cells to Achieve Efficiency over 32% B Sultana, ATMS Islam, MD Haque, A Kuddus Applied Solar Energy 59 (6), 836-850 , 2023 2023 Citations: 3
Enhanced photoconversion efficiency of Cu2MnSnS4 solar cells by Sn-/Zn-based oxides and chalcogenides buffer and electron transport layers A Kowsar, M Shafayet-Ul-Islam, MAA Shaikh, ML Palash, A Kuddus, ... Solar Energy 265, 112096 , 2023 2023 Citations: 24
Optimization of the architecture of lead-free CsSnCl3-perovskite solar cells for enhancement of efficiency: a combination of SCAPS-1D and wxAMPS study MK Hossain, GFI Toki, A Kuddus, MKA Mohammed, R Pandey, J Madan, ... Materials Chemistry and Physics 308, 128281 , 2023 2023 Citations: 129
Numerical study of MoSe 2 -based dual-heterojunction with In 2 Te 3 BSF layer toward high-efficiency photovoltaics B Sultana, ATMS Islam, MD Haque, A Kuddus, MH Ali, MF Rahman Physica Scripta 98 (9), 095935 , 2023 2023 Citations: 30
High Efficiency Cu2MnSnS4 Thin Film Solar Cells with SnS BSF and CdS ETL Layers: A Numerical Simulation A Isha, A Kowsar, A Kuddus, DMK Hossain, M Ali, M Haque, M Rahman Heliyon 9 (5), e15716 , 2023 2023 Citations: 82
Design of n-CdS/p-CuInTe 2/p+-MoS 2 thin film solar cell with a power conversion efficiency of 34.32% MDAH Pappu, A Kuddus, BK Mondal, AT Abir, J Hossain Optics Continuum 2 (4), 942-955 , 2023 2023 Citations: 51
MOST CITED SCHOLAR PUBLICATIONS
An extensive study on multiple ETL and HTL layers to design and simulation of high-performance lead-free CsSnCl 3 -based perovskite solar cells MK Hossain, GFI Toki, A Kuddus, MHK Rubel, MM Hossain, H Bencherif, ... Scientific Reports 13 (1), 2521 , 2023 2023 Citations: 625
Concurrent investigation of antimony chalcogenide (Sb2Se3 and Sb2S3)-based solar cells with a potential WS2 electron transport layer MF Rahman, MMA Moon, MK Hossain, MH Ali, MD Haque, A Kuddus, ... Heliyon 8 (12) , 2022 2022 Citations: 167
Role of facile synthesized V2O5 as hole transport layer for CdS/CdTe heterojunction solar cell: validation of simulation using experimental data A Kuddus, MF Rahman, S Ahmmed, J Hossain, ABM Ismail Micro and Nanostructures 132, 106168 , 2019 2019 Citations: 144
Optimization of the architecture of lead-free CsSnCl3-perovskite solar cells for enhancement of efficiency: a combination of SCAPS-1D and wxAMPS study MK Hossain, GFI Toki, A Kuddus, MKA Mohammed, R Pandey, J Madan, ... Materials Chemistry and Physics 308, 128281 , 2023 2023 Citations: 129
Investigating of novel inorganic cubic perovskites of A3BX3 (A= Ca, Sr, BP, As, X= I, Br) and their photovoltaic performance with efficiency over 28% A Ghosh, MF Rahman, A Kuddus, MKA Mohammed, MR Islam, ... Journal of Alloys and Compounds 986, 174097 , 2024 2024 Citations: 126
Boosting efficiency above 28% using effective charge transport layer with Sr 3 SbI 3 based novel inorganic perovskite MS Reza, MF Rahman, A Kuddus, MKA Mohammed, AK Al-Mousoi, ... RSC advances 13 (45), 31330-31345 , 2023 2023 Citations: 114
Design of a highly efficient CdTe-based dual-heterojunction solar cell with 44% predicted efficiency A Kuddus, ABM Ismail, J Hossain Solar Energy 221, 488-501 , 2021 2021 Citations: 113
Investigation of thin-film p -BaSi 2 / n -CdS heterostructure towards semiconducting silicide based high efficiency solar cell MMA Moon, MH Ali, MF Rahman, A Kuddus, J Hossain, ABM Ismail Physica Scripta 95 (3), 035506 , 2020 2020 Citations: 105
Design and numerical analysis of CIGS-based solar cell with V2O5 as the BSF layer to enhance photovoltaic performance MF Rahman, N Mahmud, I Alam, MH Ali, MMA Moon, A Kuddus, GF Toki, ... AIP Advances 13 (4) , 2023 2023 Citations: 84
A novel synthesis and characterization of transparent CdS thin films for CdTe/CdS solar cells MF Rahman, J Hossain, A Kuddus, S Tabassum, MHK Rubel, H Shirai, ... Applied Physics A 126 (2), 145 , 2020 2020 Citations: 83
High Efficiency Cu2MnSnS4 Thin Film Solar Cells with SnS BSF and CdS ETL Layers: A Numerical Simulation A Isha, A Kowsar, A Kuddus, DMK Hossain, M Ali, M Haque, M Rahman Heliyon 9 (5), e15716 , 2023 2023 Citations: 82
A novel CdTe ink-assisted direct synthesis of CdTe thin films for the solution-processed CdTe solar cells MF Rahman, J Hossain, A Kuddus, S Tabassum, MHK Rubel, ... Journal of materials science 55 (18), 7715-7730 , 2020 2020 Citations: 80
Effect of CdS and In3Se4 BSF layers on the photovoltaic performance of PEDOT: PSS/n-Si solar cells: Simulation based on experimental data BK Mondal, SK Mostaque, MA Rashid, A Kuddus, H Shirai, J Hossain Micro and Nanostructures 152, 106853 , 2021 2021 Citations: 72
Design and Optimization of High-Performance Novel RbPbBr 3 -Based Solar Cells with Wide-Band-Gap S-Chalcogenide Electron Transport Layers (ETLs) MS Reza, MF Rahman, A Kuddus, MKA Mohammed, D Pal, A Ghosh, ... ACS omega 9 (18), 19824-19836 , 2024 2024 Citations: 70
Boosting efficiency above 30% of novel inorganic Ba3SbI3 perovskite solar cells with potential ZnS electron transport layer (ETL) MF Rahman, MNH Toki, A Kuddus, MKA Mohammed, MR Islam, ... Materials Science and Engineering: B 300, 117073 , 2024 2024 Citations: 70
Simulating the performance of a high-efficiency SnS-based dual-heterojunction thin film solar cell A Kuddus, SK Mostaque, J Hossain Optical Materials Express 11 (11), 3812-3826 , 2021 2021 Citations: 63
Improving the Efficiency of a New Perovskite Solar Cell Based on Sr 3 SbI 3 by Optimizing the Hole Transport Layer MS Reza, MF Rahman, A Kuddus, MS Reza, MA Monnaf, MR Islam, ... Energy & Fuels 38 (3), 2327-2342 , 2024 2024 Citations: 52
Design of n-CdS/p-CuInTe 2/p+-MoS 2 thin film solar cell with a power conversion efficiency of 34.32% MDAH Pappu, A Kuddus, BK Mondal, AT Abir, J Hossain Optics Continuum 2 (4), 942-955 , 2023 2023 Citations: 51
Design and analysis of a SnS 2/WS 2/V 2 O 5 double-heterojunction toward high-performance photovoltaics J Al Mahmud, MF Rahman, A Kuddus, MH Ali, ATMS Islam, MD Haque, ... Energy Advances 2 (11), 1843-1858 , 2023 2023 Citations: 51
Unveiling the Structural, Electronic, Optical, Mechanical, and Photovoltaic Properties of Lead-Free Inorganic New Ba 3 MBr 3 (M = As, N, P, and Sb) Perovskites MF Rahman, MH Rahman, A Kuddus, AR Chaudhry, A Irfan Energy & Fuels 38 (8), 7260-7278 , 2024 2024 Citations: 45
