S. Madhankumar

Scopus Publications

Drying kinetics modelling of bitter gourd in a phase change material-integrated indirect solar dryer
S. Madhankumar, Geetha Narayanan Kannaiyan, T. Vignesh, S. Balamurugan, Akhilesh Kumar Singh, Vinod G. Surange
Solar Energy, 2026
Exergy and sustainability analysis of solar dryer with sinusoidal absorber plate and thermal energy storage
Shaik Abdulla, V.R. Lenin, U.R. Prasad Varma, S. Madhankumar, Nalla Bhanu Teja, Vinod G. Surange
Solar Energy, 2026
A practical duct design to improve the performance of Darrieus hydrokinetic turbine kept in river flows
S. Madhankumar, Atul Kumar Soti
Ocean Engineering, 2026
Thermal and environmental assessment of a solar dryer with phase change material and enhanced absorber plates
S. Madhankumar, M. Lava Kumar, Mohammad Saleh Barghi Jahromi, K. Durga Hemanth Kumar, Akhilesh Kumar Singh, Vikash Kumar
Journal of Energy Storage, 2026
Performance and drying kinetics of solar dryer with sinusoidal absorber plate and thermal energy storage
S. Madhankumar, V. Suresh Kannan, Gobikrishnan Udhayakumar, Anita Kumari, Akhilesh Kumar Singh, M.N.V.S.A. Sivaram Kotha
Solar Energy, 2026
Drying kinetics, energy, exergy, and economic aspects of indirect solar dryer with phase change material
S. Rajesh, S. Madhankumar, P.M. Arunkumar, T. Vignesh, S.D. Sekar
Solar Energy, 2026
Thermal energy storage-centric solar drying with phase change materials: Intelligent optimization via neural and evolutionary regression models
Mohammad Saleh Barghi Jahromi, Ayla Sayedolasgari, S. Madhankumar, Hadi Samimi Akhijahani, Payman Salami
Journal of Energy Storage, 2026
Comparative energy, environmental and economic analysis of solar air heaters with corrugated and sinusoidal absorber plates with thermal energy storage
S. Madhankumar, Ramesh Babu Bejjam, Vikash Kumar, Shantanu Debnath, Akhilesh Kumar Singh, S. Rajesh
Applied Thermal Engineering, 2025
Energy, economic and mathematical modelling of a solar drying system with Lauric acid based latent heat storage unit: an experimental study
D. Arunkumar, T.J. Prasanna Kumar, D. Moses Raja Cecil, S. Madhankumar, Akhilesh Kumar Singh, M.N.V.S.A. Sivaram Kotha
Applied Thermal Engineering, 2025
Analysis of thermal performance and drying kinetics of indirect solar drying under natural and forced convection
S. Madhankumar, Veera Reddy Aduru, V.R. Lenin, V. Suresh Kannan, Akhilesh Kumar Singh, et al.
Solar Energy, 2025
Exergy and environmental impact assessment of forced convection indirect solar drying system with Lauric acid thermal energy storage
S. Madhankumar, V.R. Lenin, V. Suresh Kannan, Abhay Khalatkar, Akhilesh Kumar Singh, N.V.S. Swamy Chinamilli
Journal of Energy Storage, 2025
Experimental investigation of indirect solar dryer with integration of copper thin fins and paraffin wax as thermal energy storage
S. Madhankumar, Karthickeyan Viswanathan, Muhammad Ikhsan Taipabu
Applied Thermal Engineering, 2025
Thermal behaviour analysis of a solar air heater with thermal energy storage: experimental study and Takagi-Sugeno Neuro fuzzy model prediction
S. Madhankumar, Ramesh Babu Bejjam, Gobikrishnan Udhayakumar, Vikash Kumar, Akhilesh Kumar Singh, Gottumukkala Santhi
Thermal Science and Engineering Progress, 2025
Drying Kinetics, Statistical and Nutritional Analysis of a Drip Lock Sheet Greenhouse Dryer for Cucumis sativus Drying
Madhankumar Seenivasan, Velusamy Kolandasamy, Senthilkumar Kandhampalayam Muthukrishnan, Selvan Thottiapalayam Arumugam, Viswanathan Arumuthu, Rajesh Suresh, Gottumukkala Santhi
Current Research in Nutrition and Food Science, 2025
Drying kinetics, mathematical modelling and colour analysis of an indirect solar dryer with latent heat storage unit for cucumber drying
S. Madhankumar, D. Arunkumar, Ch Mohan Sumanth, Akhilesh Kumar Singh, M.N.V.S.A. Sivaram Kotha, L. Feroz Ali
Solar Energy, 2025
Robust optimization-based energy management system for integrating renewable energy resources and smart grid technology
N. Loganathan, P.S. Mayurappriyan, K. Lakshmi, S. Madhankumar
Sustainable Energy Technologies and Assessments, 2025
Preface: International Conference on Innovations in Robotics, Intelligent Automation and Control (ICIRIAC 2024)
Aip Conference Proceedings, 2025
Environmental Challenges and Economic Assessment of Methanol Production Process
S. Madhankumar, Karthickeyan Viswanathan
Comprehensive Methanol Science Production Applications and Emerging Technologies First Edition Volume 1 4, 2025
EFFECT OF MICRO ECM TOOL MATERIAL ON THE SURFACE ROUGHNESS CHARACTERISTICS OF A 15-5 PH STAINLESS STEEL SPECIMEN
GOBIKRISHNAN UDHAYAKUMAR, PERIYAGOUNDER SURESH, K. VENKATESH RAJA, S. MADHANKUMAR
Surface Review and Letters, 2025
Co-production of Bi-methanol from Biomass
Muhammad Ikhsan Taipabu, Karthickeyan Viswanathan, Wei Wu, Muhammad Aziz, Po-Chih Kuo, S. Madhankumar
Comprehensive Methanol Science Production Applications and Emerging Technologies First Edition Volume 1 4, 2025
Optimization of Output Responses in Electrical Discharge Machining of Al6063 Alloy Composites with Silicon Carbide and Fly Ash
M. N. V. S. A. Sivaram Kotha, Anil Kumar Chinta, G.S. Guru Dattatreya, M. Lava Kumar, Vinod G. Surange, Madhankumar Seenivasan
SAE Technical Papers, 2025
Forecasting the Material Removal Rate of Inconel 718 Alloy in Electrochemical Machining through Machine Learning Approaches
Madhankumar Seenivasan, T. J. Prasanna Kumar, Gobikrishnan Udhayakumar, S. Rajesh, M. Bhuvaneswari, L. Feroz Ali
SAE Technical Papers, 2025
Drying kinetics, energy, statistical, economic, and proximate analysis of a greenhouse dryer using different glazing materials for Coccinia grandis drying
S. Rajesh, S. Sekar, S.D. Sekar, S. Madhankumar
Solar Energy, 2024
Drying kinetics, energy, colour and FTIR spectroscopy analysis on indirect solar dryer with paraffin wax and glass pieces as thermal storage material
T. Vignesh, D. Selvakumar, S. Madhankumar
Solar Energy, 2024
Prediction of red chilli drying performance in solar dryer with natural energy storage element using machine learning models
P.M. Arunkumar, N. Balaji, S. Madhankumar, T. Mohanraj
Journal of Energy Storage, 2024
Integrating computational models and machine learning for corrugated absorber plate solar collector thermal predictions
Madhankumar S., Devi Ilangovan, Karthickeyan Viswanathan
Process Safety and Environmental Protection, 2024
Energy and environmental analysis in an indirect solar dryer with flat coil inserted phase change material
S. Rajesh, S. Sekar, S. Madhankumar
Sustainable Energy Technologies and Assessments, 2024
Performance analysis of indirect solar dryer with natural heat energy retention substances for drying red chilli
P.M. Arunkumar, N. Balaji, S. Madhankumar
Sustainable Energy Technologies and Assessments, 2024
Solar Radiation Forecast Utilizing an Artificial Neural Network Model with Three Distinct Learning Algorithms
M. Bhuvaneswari, T. J. Prasanna Kumar, U. Gobikrishnan, S. Rajesh, D. Antony Prabu, Madhankumar Seenivasan
SAE Technical Papers, 2024
A review of the utilization of biomass-based materials in food packaging
S. Madhankumar, Karthickeyan Viswanathan
Plant Biomass Applications Materials Modification and Characterization, 2024
Automatic Hose Cutting Machine for Small Scale Industries
L. Feroz Ali, R. Manikandan, S. Madhankumar, P. Sri Hari, T. Suriya Prakash, G. Vishnu Doss
SAE Technical Papers, 2024
Autonomous Mobile Robot for Gas Leak Localization
L. Feroz Ali, S. Madhankumar, V.C. Hariush, R. Jahath Pranav, J. Jayadeep, S. Jeffrey
SAE Technical Papers, 2024
Preface: International Conference on Innovations in Robotics, Intelligent Automation and Control (ICIRIAC 2022)
Aip Conference Proceedings, 2023
A review on the latest developments in solar dryer technologies for food drying process
S. Madhankumar, Karthickeyan Viswanathan, Muhammad Ikhsan Taipabu, Wei Wu
Sustainable Energy Technologies and Assessments, 2023
Analysis of indirect solar dryer with PCM energy storage material: Energy, economic, drying and optimization
S. Madhankumar, Karthickeyan Viswanathan, Wei Wu, Muhammad Ikhsan Taipabu
Solar Energy, 2023
Electrical discharge Machining process variable assessment on Al 7075 mixed composite materials utilizing multi-criteria optimization method
M.N.V.S.A. Sivaram Kotha, T.J. Prasanna Kumar, U. Gobikrishnan, TA. Selvan, S. Rajesh, S. Madhankumar
Materials Today Proceedings, 2023
Design of Automatic Headlamp Control Using Light-Dependent Resistor Sensors and Night Vision Camera
S. Madhankumar, K. Abhinav Kumaar, S. Arunachalam, R. Bavan Kalyan, K. Hrithik, S. Rajesh, Mohan Rao Thokala
Lecture Notes in Networks and Systems, 2023
An empirical study of the impacts of parameters in micro electrochemical drilling of Al 7075 alloy composites with SiC and fly-ash
N.V.S. Swamy Chinamilli, P. Azhagarsamy, D. Antony Prabhu, S. Rajesh, P.J. Lokesh Kumar, T.A. Selvan, A. Viswanathan, S. Madhankumar
Materials Today Proceedings, 2023
Computational and experimental study of a novel corrugated-type absorber plate solar collector with thermal energy storage moisture removal device
S. Madhankumar, Karthickeyan Viswanathan
Applied Energy, 2022
Multi-objective Optimization on Processing Parameters for Micro ECM of Inconel Alloy Using Taguchi Based Grey Relation Analysis
Selvan T. A., A. Viswanathan, S. Madhankumar, K. M. Senthilkumar
Functional Composite Materials Manufacturing Technology and Experimental Application, 2022
Surface roughness assessments and comparative study of Inconel 625 and Inconel 718 alloys after micro electrochemical machining
S. Rajesh, D. Antony Prabu, U. Gobikrishnan, P.J. Lokesh Kumar, T.A. Selvan, Adithyaa Ramesh, S. Madhankumar
Materials Today Proceedings, 2022
Electrochemical machining of aluminium 7075 alloy, silicon carbide, and fly ash composites: An experimental investigation of the effects of variables on material removal rate
S. Rajesh, U. Gobikrishnan, N. Krishnarjuna Rao, R. Balamurugan, K.M. Senthilkumar, T.A. Selvan, S. Madhankumar
Materials Today Proceedings, 2022
Taguchi-based grey relational study for multiple criterion optimization on process variables for micro Electro-chemical Machining of Inconel Super-alloy
T.A. Selvan, M.N.V.S.A. Sivaram Kotha, N.V.S. Swamy Chinamilli, G.S. Guru Dattatreya, S. Rajesh, P.B. Akshey, S. Madhankumar
Materials Today Proceedings, 2022
Energy, exergy and environmental impact analysis on the novel indirect solar dryer with fins inserted phase change material
S. Madhankumar, Karthickeyan Viswanathan, Wei Wu
Renewable Energy, 2021
Design and Modelling of Automated Hot Oven Food Dehydrator
S. Madhankumar, K.S.R. Muthukkhumaran, R.A. Navaneeth, M. Padmanabhan, K.M. Shriram
2021 7th International Conference on Advanced Computing and Communication Systems Icaccs 2021, 2021
Automated Moisture Remover for Drying Agricultural Products
S. Madhankumar, V. Harish, C.P. Jayanth, R. Manikandan, N. Aswin
2021 7th International Conference on Advanced Computing and Communication Systems Icaccs 2021, 2021
Design and Modelling of Autonomous Mobile Robot for Material Handling
S. Madhankumar, P. Anandraj, Anirudh Varadarajan, R. Aravind Kumar, K. Kaleeswaran
2021 7th International Conference on Advanced Computing and Communication Systems Icaccs 2021, 2021
Design and Development of an Automatic Unmanned Railway Level Crossing Gate
T. A. Selvan, A. Viswanathan, S. Madhankumar, R. Dhanush Kumar
Iop Conference Series Materials Science and Engineering, 2021
Fabrication of Pineapple Peeling Machine Using Pneumatic Solenoid Valve
S Madhankumar, H Suryakumar, R Sabarish, M Suresh, A Ummer Farook
Iop Conference Series Materials Science and Engineering, 2021
Optimization of Material Removal Rate and Surface Roughness for Micro ECM of Inconel 718 alloy utilizing Grey Relational Technique
S Madhankumar, S Rajesh, R Balamurugan, N Tharun Sri Ram, S Venuprasath, S Tazmeel Ahamed
Iop Conference Series Materials Science and Engineering, 2021
Investigation on design and analysis of passenger car body crash-worthiness in frontal impact using radioss
R. Balamurugan, S. Vijayakumar, T. Raja, S. Madhankumar
SAE Technical Papers, 2020
Fabrication of Al6063 alloy, silicon carbide and boron glass powder metal matrix composites in stir casting process and analysis the impact of process variables on mechanical properties
S. Madhankumar, R. Balamurugan, S. Rajesh, K.M. Senthilkumar
Materials Today Proceedings, 2020
Multi-objective optimization on output responses for micro ECM of Al6063 alloy, silicon carbide and boron glass powder metal matrix composites
T.A. Selvan, S. Madhankumar, A. Viswanathan, K.M. Senthilkumar
Materials Today Proceedings, 2020
Gyro-stabilized Platform in Ambulance
T. Vignesh, S. Madhankumar, P. Anand Raj, Anirudh Varadarajan, T. Arul Praveen
Lecture Notes in Electrical Engineering, 2020
Mechanical characterization of glass fiber resin reinforced with sugarcane
S. Rajesh, S. Madhankumar, B. Mathivanan, R. Magesh, N. Arunkumar
Materials Today Proceedings, 2020
Study of the mechanical properties of Al7075 alloy, silicon carbide and fly ash composites manufactured by stir casting technique
S. Rajesh, R. Suresh Kumar, S. Madhankumar, M. Sheshan, M. Vignesh, R. Sanjay Kumar
Materials Today Proceedings, 2020
Design and Modelling of L-type Bi-directional Roller Conveyers for Glass Hauling
S. Madhankumar, T. Vignesh, P. Anand Raj, Anirudh Varadarajan, T. Arul Praveen, S. Rajesh
Lecture Notes in Electrical Engineering, 2020
Design and modelling of self balancing electric two-wheeler using gyroscope
Journal of Critical Reviews, 2020
Experimental investigation on ultimate tensile strength of laser butt welded inconel 718 alloy and 2205 duplex stainless steel
S. Madhankumar, S. Ashwin, J. Ajai Robert, J. Clifford Francis, R. Bavan Kalyan, A. Krithik Raj, W. Joel Anton
Materials Today Proceedings, 2020
Study and selection of hot forging die materials and hardness
S. Madhankumar, K.R. Hari Narayanan, V. Harini, K.V. Gokulraj, S. Selvakumar, R. Dharshini, K. Dharshini, T.R. Harikrishnan
Materials Today Proceedings, 2020
Assessments and comparison of Inconel 625 and Inconel 718 alloys from overcut in micro ECM
S. Madhankumar, K. Abhinav Kumaar, S. Arunachalam, J. Blesswin Suhirtharaj, K. Anek Anil, P. Aadhavan, K.R. Hari Narayanan, P.B. Akshey
Materials Today Proceedings, 2020
Mathematical analysis and mechanical modeling of an inoculation system on feeder control for pouring unit in a foundry station
P. Gomathi, S. Gowri, A. Viswanathan, T. A. Selvan, S. Madhankumar
International Journal of Innovative Technology and Exploring Engineering, 2019
Investigations on austenitic nickel-chromium based super alloys - Inconel 625 and Inconel 718 from material removal rate in micro electrochemical machining
S. Madhankumar, R. Balamurugan, S. Rajesh
Aip Conference Proceedings, 2019
Design and fabrication of automatic spring type chip conveyor
T. A. Selvan, A. Viswanathan, S. Madhankumar, S. Sneha
International Journal of Recent Technology and Engineering, 2019
Design and fabrication of automated powder coating system
International Journal of Engineering and Advanced Technology, 2019
Design and modelling of disaster relief vehicle using rocker bogie mechanism
International Journal of Innovative Technology and Exploring Engineering, 2019

S. Madhankumar

RESEARCH INTERESTS

Scopus Publications