Vidyashree Nandini

@srmist.edu.in

Professor and Head, Department of Prosthodontics and Implantology
SRM Kattankulathur Dental College and Hospital

Vidyashree Nandini


               Download Compact PDF  
https://researchid.co/vidyashree

EDUCATION

MDS., DNB., MAMS

RESEARCH INTERESTS

Prosthodontics, Biomaterials, Implants
25

Scopus Publications

710

Scholar Citations

12

Scholar h-index

13

Scholar i10-index

Scopus Publications

  • Comparative evaluation of abutment screw loosening with two different thread lockers under cyclic loading: An in vitro study
    Lizy Teena Arul, Vidyashree Nandini Venugopal, Russia Marimuthu, Sarthak Ray Arindham, Manjula Gunasekeran
    Journal of Indian Prosthodontic Society, 2026
    Aim: To evaluate and compare the effects of different thread lockers on implant abutment screw loosening. Settings and Design: An in-vitro study. Materials and Methods: Thirty implant-abutment assemblies were divided into 3 groups: Control group (without threadlocker), dimethacrylate group, and methacrylate group. Each group was subdivided into static and dynamic groups. The specimens were torqued to 35 Ncm, and detorque values were measured after 1 month in static conditions and after cyclic loading. The cyclic loading protocol involved 240,000 cycles at a velocity of 16 mm/s over a 48-h period in a moist environment, simulating 1 year of clinical function. Statistical Analysis Used: Two-way ANOVA tests were applied to assess intergroup comparisons of detorque values (Ncm) under static and dynamic conditions. Results: Results were assessed using one-way, two-way ANOVA and multiple pairwise comparisons with a significance level of P ≤ 0.05. The methacrylate group demonstrated the highest detorque values (static: 36.46 ± 0.95 Ncm, dynamic: 33.22 ± 0.34 Ncm), followed by the dimethacrylate group (static: 32.84 ± 1.12 Ncm, dynamic: 29.98 ± 1.05 Ncm). The control group exhibited the lowest detorque values (static: 28.80 ± 0.96 Ncm, dynamic: 25.84 ± 0.63 Ncm). Detorque values were consistently higher in the static condition (32.40 ± 3.37 Ncm) compared to the dynamic condition across all groups (29.68 ± 3.20 Ncm), with statistically significant differences observed ( P = 0.000). Conclusion: Within the limitations of the study, application of threadlockers significantly improved abutment screw retention, with methacrylate exhibiting superior performance over dimethacrylate. The reduction in detorque values under cyclic loading highlights the need for enhanced retention strategies in implant prosthetics. Incorporating methacrylate-based threadlockers in clinical practice may mitigate screw loosening and enhance the long-term success of implant-supported prostheses.
  • Cissus quadrangularis mediated biogenic synthesis of silver-nanohydroxyapatite-mesoporous silica nanocomposite, characterization, and cytotoxicity evaluation on dental pulp stem cells
    Shobana Krishnakumar, V. Vidyashree Nandini, Kalaivani Thirunavukarasu, Udhayakeerthana Chinnathambi, K. Vijay Venkatesh
    Discover Nano, 2025
    This study focuses on tripartite synthesis of Silver (AgNPs), Mesoporous Silica (MSNs), and Hydroxyapatite (n-HAp) nanoparticles with aqueous extract of Cissus quadrangularis (Veldt grape plant; Indian name: Pirandai) as a reducing agent. The dried and powdered form of the plant was subjected to aqueous extraction. The phytochemicals analysis was qualitatively estimated which detected the presence of alkaloid, tannin, phenol, terpenoid, steroid and saponin. The total phenol content of the extract was quantitatively estimated which resulted in Gallic acid equivalent (GAE) of 88.9 mg/g. This aqueous extract was then used in the synthesis of AgNPs, followed by synthesis of MSNs and n-HAp. These three nanoparticles were again combined together and re-synthesized in a tripartite manner to create a novel nanocomposite material. This nanocomposite was characterized by using techniques such as UV–vis spectroscopy, X-ray Diffraction (XRD) and Fourier-Transfer Infrared Spectroscopy (FTIR) to detect the presence, size, stability and functional groups of the synthesized nanoparticles. The bioavailability of synthesized nanoparticles was evaluated by testing their cytotoxicity against dental pulp stem cells (DPSC), which resulted in IC 50 values of 49.004, 106.869, 113.711, 131.27 µg/ml for AgNP, n-HAp, MS and tripartite composite respectively. Following this, the proliferation rate of DPSC cells treated culture media diluted composites in the ratio 1:1, 1:2 and 1:4 was evaluated. From the results it was found that cells co-cultured with composite dilution has shown increased proliferation rate. These findings highlight the biocompatibility and the potential of tripartite synthesized nanocomposite, when incorporated in dental restorative materials may give promising results.
  • An in vitro evaluation of the efficacy of kaempferol as an antimicrobial agent on periodontal pathogens: An in vitro study
    S. Raja Rajeswari, V. Vidyashree Nandini, N. Rajendran, M.G. Triveni, P.L. Ravishankar, Divya Dhingra
    International Journal of Nutrition Pharmacology Neurological Diseases, 2024
    Aims: Kaempferol, a flavonoid found in many edible plants, has been attributed to having antimicrobial activity against microorganisms. The current work focused on ascertaining the minimum inhibitory concentration (MIC) and conducting time-kill analysis of pure kaempferol against periodontal pathogens, along with elucidation of the antiproteolytic effect of kaempferol against Porphyromonas gingivalis protease. Method: Kaempferol dissolved in dimethyl sulfoxide was tested against six standard periodontal pathogens, namely P. gingivalis, Prevotella intermedia, Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans, Tannerella forsythia, and Candida albicans, to determine the minimum bacterial concentration (MBC), MIC, and conduct time-kill analysis using serial dilution and plating method. The gelatin liquefaction test was conducted to determine the antiproteolytic activity against P. gingivalis. Results: Kaempferol was found to exhibit bactericidal activity against all analyzed periodontal pathogens. The MBC ranged from 6.25 to 100 µL/mL (P. gingivalis and P. intermedia—6.25 µL/mL; T. forsythia and C. albicans—12.5 µL/mL; F. nucleatum—50 µL/mL; A. actinomycetemcomitans—100 µL/mL). MIC ranged from 3.12 to 50 µL/mL. Time-kill analysis demonstrated that the C. albicans was inhibited by 90% within the first 2 hours of incubation and P. gingivalis and F. nucleatum by 80% within 6 hours. Complete inhibition of protease activity was established at 12.5 µL/mL concentration of kaempferol. Conclusion: The study results demonstrated kaempferol’s antimicrobial efficacy against periodontal pathogens and its ability to inhibit protease activity in P. gingivalis. Kaempferol holds promise as a safer alternative to conventional antibiotics in the treatment of periodontitis, thus expanding the therapeutic options in antimicrobial strategies.
  • Prediction of excess cement residues using a regression model to avoid peri-implant diseases: An in vitro study
    Febina Josephraj, Vidyashree Nandini Venugopal, Varshini Karthik
    Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, 2024
    Dental implant restorations attached to cement can potentially result in peri-implant mucositis and peri-implantitis if cement residues are present. Effectively predicting and eliminating such dental cement residues is crucial for preventing complications. This study focuses on creating a regression model using the pixel values to predict the Excess Cement Residues (ECR) by employing an octagonal surface imaging approach. A model featuring gingival imitation, ten abutments, and ten crowns was created, and the cemented implants underwent thorough photographic and analytical assessment. The ECR was determined through two distinct approaches: the Computerized Planimetric Method (CPM) and the weighing method. Across ten implants in this in vitro study, ECR varied from 0.3 to 21 mg, with an average of 5.69 mg. The findings reveal a higher amount of ECR on the distal, mesiobuccal, and mesial sides. Utilizing Pearson’s correlation, a coefficient value of r = 0.786 signifies a strong correlation between CPM and the weighing method. The regression model further aids in predicting ECR based on pixel values. The octagonal surface imaging approach not only vividly captures information about ECR in the implant cementation region but also emphasizes the feasibility of ImageJ as an effective tool for detecting ECR. The congruence between CPM and the weighing method results supports the application of the regression model for precise ECR prediction.
  • Performance evaluation of carbon quantum dots impregnated glass ionomer cement to avoid peri-implant disease
    Febina Josephraj, Ashwin Kumar N, Vidyashree Nandini V, Sujatha S, Varshini Karthik
    Biomedical Materials Bristol, 2024
    Dental cement residues exacerbate peri-implant tissue irritation and peri-implantitis. The present study aims to evaluate the cytotoxicity, physiochemical, optical, and rheological properties of carbon quantum dots (CQDs) impregnated glass ionomer cement (GIC). Surface passivated fluorescent CQDs were synthesized using citric acid via thermal decomposition and blended with GIC. Characterization studies and rheological measurements were made to evaluate their performance. 3D-printed dental implant models cemented with GIC and GIC-CQD were compared to analyze excess cement residues. MTT assay was performed with human dental pulp stem cells (hDPSCs) and statistically analyzed using ANOVA and Tukey’s test. CQDs with a particle dimension of ∼2 nm were synthesized. The amorphous property of GIC-CQD was confirmed through XRD. The fluorescence properties of GIC-CQD showed three times higher emission intensity than conventional GIC. GIC-CQD attained maturation with a setting time extended by 64 s than GIC. Cement residue of size 2 mm was detected with a UV light excitation at a distance between 5 to 10 cm. Biocompatibility at 0.125 mg ml−1 dilution concentrations of GIC-CQD showed viability greater than 80% to hDPSCs. For the first time, we report that CQDs-impregnated GIC is a unique and cost-effective strategy for in-situ detection of excess cement rapidly using a hand-held device. A novel in-situ rapid detection method enables the dentist to identify residual cement of size less than 2 mm during the implantation. Therefore, GIC-CQD would replace conventional GIC and help in the prevention of peri-implant diseases.
  • A Comparative Evaluation of Three Methods of Disinfection of Gypsum Casts and the Changes in Surface Roughness and Dimensional Accuracy after Disinfection-An Ex Vivo Study
    DM Lakshmi, VV Nandini, SN Raj, NH Albar, A Alamoudi, SA Bahammam, B Zidane, HA Bahammam, S Patil
    Nigerian Journal of Clinical Practice, 2024
    Background: One of the major problems of everyday dental practice is cross-contamination. It can place office personnel, dentists, and patients at risk of acquiring serious illness. Disinfection helps in controlling this cross-contamination to an extent. The evaluation was done to find the efficient disinfection method on gypsum casts. Aims: The aim of this study is to evaluate and compare the efficacy of three methods of disinfection of gypsum casts, namely, chemical disinfection by immersion, spray method, and microwave method, and also to evaluate and compare changes in surface roughness and dimensional accuracy between the three methods after disinfection. Materials and Methods: Ex vivo and experimental study. Thirty participants were selected, and impressions of the maxillary arch were made using polyvinyl siloxane impression material. Ninety type IV die stone gypsum casts were poured. It was divided into three groups and was subjected to chemical disinfection by immersion and spray methods, and microwave method. The disinfected casts were evaluated for microbial growth, surface roughness, and dimensional accuracy. It was performed by using the one-way analysis of variance test and paired t-test followed by the Kruskal − Wallis test and Wilcoxon signed rank test (α = 0.05). Results: Microwave disinfection was more effective than both immersion and spray chemical disinfection methods (P < 0.010 and <0.001). The surface roughness of the microwave-irradiated casts had significantly increased after disinfection. However, there were no significant dimensional changes by any of the methods of disinfection. Conclusion: Within the limitations of the study, the microwave method of disinfection is more effective in eradicating microorganisms when compared to chemical methods of disinfection by immersion and spray methods.
  • Evaluating the effect of poly (amidoamine) treated bioactive glass nanoparticle incorporated in universal adhesive on bonding to artificially induced caries affected dentin
    Akhil C. Rao, Vijay Venkatesh Kondas, Vidyashree Nandini, Ravi Kirana, Pradeep Kumar Yadalam, Rajalakshmanan Eswaramoorthy
    BMC Oral Health, 2023
    Background The purpose of this study was to evaluate remineralisation and its effect on microtensile bond-strength of artificially induced caries affected dentin (CAD) when treated with a commercial universal adhesive modified with poly(amidoamine) dendrimer (PAMAM) loaded mesoporous bioactive glass nanoparticles (A-PMBG). Material and methods Mesoporous bioactive glass nanoparticles (MBG) were synthesised using sol–gel process, where PAMAM was loaded (P-MBG) and added to commercial adhesive at different weight percentages (0.2, 0.5, 1 and 2 wt%). First, rheological properties of commercial and modified adhesives were evaluated. The effect of remineralization/hardness and microtensile bond-strength (MTBs) of those samples that mimicked the rheological properties of commercial adhesives were evaluated using Vickers hardness tester and universal testing machine respectively. Scanning-Electron microscope was used to visualize failed samples of MTBs and remineralization samples. Both evaluations were carried out at 1-,3 and 6-month intervals, samples being stored in stimulated salivary fluid during each time interval. Results Addition of nanoparticles altered the rheological properties. With increase in the weight percentage of nanoparticles in commercial adhesive, there was significant increase in degree of conversion, viscosity and sedimentation rate (p < 0.05). The 0.2 and 0.5 wgt% groups closely mimicked the properties of commercial adhesive and were evaluated for remineralization and MTBs. After 6 months, 0.2wgt% group showed increased MTBs (p < 0.05) and 0.5wgt% group increased remineralization/hardness (p < 0.05). Conclusion The complex of PAMAM-MBG-Universal adhesive can remineralize the demineralised CAD thereby improving its bond-strength when evaluated for up to 6-months.
  • Dimensional Stability and Retention Strength of Impressions to Custom Impression Trays Fabricated Using Conventional Method and Additive Technology - An In-vitro Study
    K Sangeetha Priyadarshini, V Vidyashree Nandini, Russia Marimuthu, Jailance Lathief
    Indian Journal of Dental Research, 2023
    Background: 3D printing technology is replacing manual fabrication in all fields. 3D-printed impression trays should be assessed as they could replace conventional impression trays in the future. Aim: In-vitro comparison and evaluation of the dimensional stability and retention strength of impressions to custom impression trays fabricated using conventional method and additive technology. Materials and Methods: A maxillary edentulous auto-polymerizing acrylic resin model served as the master model. Two moulds were prepared from the master model in order to obtain 12 casts. One cast was scanned for 3D printing digital light processing (DLP) and fused deposition modelling (FDM) 24 impression trays using polylactic acid (PLA). Twelve casts were used to fabricate light cure impression trays. Polyvinyl-siloxane impressions were made on the master model using 36 impression trays and 18 trays each were used to assess dimensional stability and retention strength. Results: In dimensional stability analysis, one sample t-test revealed a statistically significant difference between each group and the master model followed by a one-way ANOVA. There were significant differences, but the difference was less with FDM trays (P < 0.05). In retention strength analysis, one-way Analysis of variance (ANOVA) revealed statistically significant difference between each group and post-hoc test revealed specific difference, the highest with FDM trays (P < 0.05). Conclusion: Dimensional changes were observed at 30 minutes and 72 hours. Lesser dimensional changes were observed when impressions were made using FDM trays followed by DLP and light cure trays. The mean retention strength seen in descending order was FDM, followed by DLP and light cure trays. The best retention strength was noticed when impressions were made using FDM trays.
  • Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology: An In Vitro Comparison
    Hemavardhini Addugala, Vidyashree Nandini Venugopal, Surya Rengasamy, Pradeep Kumar Yadalam, Nassreen H. Albar, Ahmed Alamoudi, Sarah Ahmed Bahammam, Bassam Zidane, Hammam Ahmed Bahammam, Shilpa Bhandi, Deepti Shrivastava, Kumar Chandan Srivastava, Shankargouda Patil
    Materials, 2022
    This study analyzes the evidence of the marginal discrepancy and internal adaptation of copings fabricated using three types of resin patterns with subtractive (milling) and additive technology (3D printing), as it is not widely reported. Working casts (n = 15) were scanned and patterns were completed using computer-aided designing (CAD). Resin patterns were fabricated using the designed data and divided into three groups according to the method of fabrication of patterns: subtractive technology–CAD milled polymethyl methacrylate resin (Group-PMMA), additive technology [digital light processing (DLP) technique]–acrylonitrile–butadiene–styrene (ABS) patterns (Group-ABS), and polylactic acid (PLA) patterns (Group-PLA). Resin patterns were casted with Cobalt–Chromium (Co–Cr) alloy (lost wax technique). Internal and marginal gaps of the metal copings were analyzed with the replica technique under optical microscope. The Kruskal–Wallis test was used to compare values among the groups, and post hoc multiple tests confirmed the specific differences within the groups. The median marginal gap was least for CAD milled resin patterns, followed by PLA printed resin patterns and ABS printed resin patterns. There were significant differences between Group-PMMA and Group-PLA and Group-ABS (p = 0.0001). There was no significant difference between Group-PLA and Group-ABS (p = 0.899). The median internal gap was least for metal copings fabricated from Group-PLA, followed by Group-ABS and Group-PMMA. The differences were not statistically significant (p = 0.638) for the internal gap. Full metal Co–Cr copings fabricated from the milled PMMA group had a better marginal fit, followed by the PLA and ABS printed groups. Copings fabricated with the PLA printed group had the best internal fit, though the values were statistically insignificant between the groups.
  • Comparison of retention of two different attachment systems used in implant-supported overdentures
    Journal of Pharmacy and Bioallied Sciences, 2022
  • A clinical study to assess the severity of periodontal disease in relation to glycemic status of Type II diabetic individuals
    Journal of Pharmacy and Bioallied Sciences, 2022
  • Aesthetic perception of patients and dentists on conventional and characterized complete dentures
    Journal of Pharmacy and Bioallied Sciences, 2022
  • Evaluating the Effect of Tideglusib-Loaded Bioactive Glass Nanoparticles as a Potential Dentine Regenerative Material
    Akhil C. Rao, K. Vijay Venkatesh, Vidyashree Nandini, Dhanasekaran Sihivahanan, Ahmed Alamoudi, Hammam Ahmed Bahammam, Sarah Ahmed Bahammam, Bassam Zidane, Maha A. Bahammam, Hitesh Chohan, Nassreen H. Albar, Pradeep Kumar Yadalam, Shankargouda Patil
    Materials, 2022
  • Biomineralized Limpet Radular Teeth as Functionalized Bio-fillers in Experimental Dental Composite Resin
    Dhanasekaran Sihivahanan, Tripuravaram VK Reddy, Venugopal V Nandini
    World Journal of Dentistry, 2022
  • Comparative Evaluation of Mechanical Properties of Titanium Dioxide Nanoparticle Incorporated in Composite Resin as a Core Restorative Material
    Dhanasekaran Sihivahanan, Venugopal V Nandini
    Journal of Contemporary Dental Practice, 2021
  • Influence of titania nanotubes diameter on its antibacterial efficacy against periodontal pathogens: An in vitro analysis
    Vidyashree Nandini, SRaja Rajeswari, Agilan Perumal, Rajendran, Triveni Gowda
    Journal of Pharmacy and Bioallied Sciences, 2021
  • Study to evaluate the oral health and salivary pH in type II diabetes individuals among south Indian population in Chengalpet district – A case control study
    Romanian Journal of Diabetes Nutrition and Metabolic Diseases, 2021
  • Modified Self-centering Facebow: A Novel Prototype
    Neha Lovekumar, Venugopal Vidyashree Nandini, Nikhath Sultana
    International Journal of Prosthodontics and Restorative Dentistry, 2020
  • Goethite nanofibers as bio-fillers in dental composite resin
    Dhanasekaran Sihivahanan, V. Nandini, E. Rajesh, N. Anitha
    Indian Journal of Forensic Medicine and Toxicology, 2020
  • Direct metal laser sintering: A digitised metal casting technology
    K. Vijay Venkatesh, V. Vidyashree Nandini
    Journal of Indian Prosthodontist Society, 2013
  • Preliminary impressions in microstomia patients: An innovative technique
    K. Aswini Kumar, Vinaya Bhat, V. Vidyashree Nandini, K. Chandrasekharan Nair
    Journal of Indian Prosthodontist Society, 2013
  • Periapical radiolucency not requiring endodontic therapy: An unusual case
    VVidyashree Nandini, KVijay Venkatesh
    Indian Journal of Dental Research, 2009
  • Zirconia post-pressed ceramic core-supported all-ceramic crown: Case reports and 4-year follow-up
    VidyashreeV Nandini, VijayK Venkatesh, D Kandaswamy
    Journal of Indian Prosthodontist Society, 2007
  • Current concepts in the restoration of endodontically treated teeth
    VidyashreeV Nandini, V Venkatesh
    Journal of Indian Prosthodontist Society, 2006
  • Comparative evaluation of hight tracer, Chandra tracer, intraoral tracer, functiograph and checkbite: A clinical study
    VV Nandini, KC Nair, MC Sudhakar, TS Poduval
    Journal of Indian Prosthodontist Society, 2005

RECENT SCHOLAR PUBLICATIONS

  • Cissus quadrangularis mediated biogenic synthesis of silver-nanohydroxyapatite-mesoporous silica nanocomposite, characterization, and cytotoxicity evaluation …
    S Krishnakumar, VV Nandini, K Thirunavukarasu, U Chinnathambi, ...
    Discover Nano 20 (1), 150 , 2025
    2025
    Citations: 1
  • The prevalence of alveolar ridge defects according to Seibert's classification: a cross-sectional study
    KR Sadhana, VV Nandini
    Cureus 16 (12) , 2024
    2024
    Citations: 6
  • Revolutionizing dental restorations: the impact of digital impressions on conventional techniques and modern implant dentistry
    SM Sundaram, VV Nandini
    Sch J Dent Sci 11, 139-42 , 2024
    2024
    Citations: 2
  • Prosthetic rehabilitation of a mandibular defect using a malo bridge: a case report
    S Boruah, VV Nandini, S Ahmed, A Saravanan
    Cureus 16 (9) , 2024
    2024
    Citations: 1
  • Comparison of the Antimicrobial Efficacy of Conventional Versus Chitosan Re-inforced Heat-Polymerized Polymethylmethacrylate Dental Material: An In Vitro Study
    T Ramamurthy, S Ahmed, VV Nandini, S Boruah
    Cureus 16 (9) , 2024
    2024
    Citations: 3
  • A Comparative Evaluation of Antifungal and Physical Properties When Nanoparticles Are Incorporated Into the Tissue Conditioner: An In Vitro Study
    S Lavanya, S Ahmed, VV Nandini, A Saravanan, S Kr
    Cureus 16 (8) , 2024
    2024
  • Fabrication of a customized ocular prosthesis: a case report
    N Sultana, S Boruah, VV Nandini, N Raj, M SP Sr
    Cureus 16 (8) , 2024
    2024
    Citations: 3
  • Comparative evaluation of microhardness and polymerization shrinkage in residual zirconia reinforced provisional restorations: an in vitro study
    H Naina, VV Nandini, DM Kumar, S Boruah, NS Raj, N Raj
    Cureus 16 (7) , 2024
    2024
    Citations: 1
  • Evaluation of the surface roughness and color stability of two types of milled zirconia before and after immersion in alcoholic beverages: An in vitro study
    RS Arindham, VV Nandini, S Boruah, J Lathief
    Cureus 16 (7) , 2024
    2024
    Citations: 3
  • An in vitro evaluation of the efficacy of kaempferol as an antimicrobial agent on periodontal pathogens: An in vitro study
    SR Rajeswari, VV Nandini, N Rajendran, MG Triveni, PL Ravishankar, ...
    International Journal of Nutrition, Pharmacology, Neurological Diseases 14 … , 2024
    2024
    Citations: 3
  • Evaluation Of Peri Implant Tissue Displacement Around Single Piece Implants Using 3 Different Displacement Methods-A Clinical Study.
    NL Kumar, VV Nandini
    Journal of Advanced Zoology 45 (3) , 2024
    2024
  • FABRICATION OF GASKET RETAINED CU-SIL LIKE PARTIAL DENTURE USING 3D PRINTED TECHNOLOGY IN THE REHABILITATION OF PATIENT WITH SINGLE REMAINING NATURAL TEETH–A CASE REPORT
    VV NANDINI
    CHETTINAD HEALTH CITY MEDICAL JOURNAL Учредители: Advanced Research … , 2024
    2024
  • IN VITRO TESTING OF PROTECTIVE EYE WEAR IN BLOCKING BLUE LIGHT FROM DENTAL LIGHT CURING UNIT
    M DAS, VV NANDINI, SH BORUAH
    JOURNAL OF CLINICAL PROSTHODONTICS AND IMPLANTOLOGY Учредители: Indian … , 2024
    2024
  • PREVENTION OF ACCIDENTAL INGESTION/ASPIRATION OF ZIRCONIA CROWNS: A CAD-BASED TECHNIQUE
    SH BORUAH, VV NANDINI, M SP
    JOURNAL OF CLINICAL PROSTHODONTICS AND IMPLANTOLOGY Учредители: Indian … , 2024
    2024
  • Comparison of Gingival Displacement Using Paste Technique and Combination Technique (Cord and Paste) in Digital Impressions: A Pilot Study
    A Kumar, VV Nandini, S Boruah, L Jailance
    J. Orofac. Rehabil 4, 16-24 , 2024
    2024
    Citations: 1
  • Fabrication of a Customized Ocular Prosthesis: A
    N Sultana, S Boruah, SP Mathivathani, VV Nandini, SR Naveen Raj
    2024
  • A Comparative Evaluation of Three Methods of Disinfection of Gypsum Casts and the Changes in Surface Roughness and Dimensional Accuracy after Disinfection—An Ex Vivo Study
    DM Lakshmi, VV Nandini, SN Raj, NH Albar, A Alamoudi, SA Bahammam, ...
    Nigerian Journal of Clinical Practice 27 (1), 47-53 , 2024
    2024
    Citations: 1
  • A Comparative Evaluation of Three Methods of Disinfection of Gypsum Casts and the Changes in Surface Roughness and Dimensional Accuracy after DisinfectionAn Ex Vivo Study
    VVNandini
    Nigerian Journal of Clinical Practice 24 , 2024
    2024
  • Evaluation of Physical Properties of Denture Base Resins Containing Silver Nanoparticles of Aloe barbadensis Miller, Morinda citrifolia, and Boesenbergia rotunda and Its Anti …
    S Kaul, S Ahmed, VV Nandini, J Lathief, S Boruah
    Cureus 15 (11) , 2023
    2023
    Citations: 7
  • Evaluating the effect of poly (amidoamine) treated bioactive glass nanoparticle incorporated in universal adhesive on bonding to artificially induced caries affected dentin
    AC Rao, VV Kondas, V Nandini, R Kirana, PK Yadalam, ...
    BMC Oral Health 23 (1), 810 , 2023
    2023
    Citations: 15

MOST CITED SCHOLAR PUBLICATIONS

  • Alginate impressions: A practical perspective
    VV Nandini, KV Venkatesh, KC Nair
    Journal of Conservative Dentistry and Endodontics 11 (1), 37-41 , 2008
    2008.0
    Citations: 235
  • Direct metal laser sintering: a digitised metal casting technology
    KV Venkatesh, VV Nandini
    The Journal of Indian Prosthodontic Society 13 (4), 389-392 , 2013
    2013.0
    Citations: 176
  • Current concepts in the restoration of endodontically treated teeth
    VV Nandini, V Venkatesh
    The Journal of Indian Prosthodontic Society 6 (2), 63-67 , 2006
    2006.0
    Citations: 33
  • Occlusal principles and considerations for the osseointegrated prosthesis
    SA Jacob, VV Nandini, S Nayar, A Gopalakrishnan
    J Dent Med Sci 3 (5), 47-54 , 2013
    2013.0
    Citations: 21
  • An in vitro comparison of microbial adhesion on three different denture base materials and its relation to surface roughness
    N Sultana, S Ahmed, VV Nandini, J Lathief, S Boruah
    Cureus 15 (4), e37085 , 2023
    2023.0
    Citations: 19
  • Comparative Evaluation of Mechanical properties of Titanium Dioxide Nanoparticle Incorporated in Composite Resin as a Core Restorative Material
    N VV
    The Journal of Contemporary Dental Practice 22 (6), 686-690 , 2021
    2021.0
    Citations: 19
  • Evaluating the Effect of Tideglusib-Loaded Bioactive Glass Nanoparticles as a Potential Dentine Regenerative Material
    VN Akhil Rao, K. Vijay Venkatesh
    Materials 15 (4567) , 2022
    2022.0
    Citations: 18
  • Periapical radiolucency not requiring endodontic therapy: an unusual case
    KV Venkatesh, VV Nandini
    Indian Journal of Dental Research 20 (1), 126-128 , 2009
    2009.0
    Citations: 17
  • Preliminary impressions in microstomia patients: an innovative technique
    K Aswini Kumar, V Bhat, VV Nandini, K Chandrasekharan Nair
    The Journal of Indian Prosthodontic Society 13 (1), 52-55 , 2013
    2013.0
    Citations: 16
  • Evaluating the effect of poly (amidoamine) treated bioactive glass nanoparticle incorporated in universal adhesive on bonding to artificially induced caries affected dentin
    AC Rao, VV Kondas, V Nandini, R Kirana, PK Yadalam, ...
    BMC Oral Health 23 (1), 810 , 2023
    2023.0
    Citations: 15
  • Acetal Resin-A quantum leap in aesthetic restorative dentistry: A Review
    SA Thomas, V Nandini
    International Journal of Clinical Dental Science 2 (4) , 2011
    2011.0
    Citations: 15
  • Comparative Evaluation of Hight Tracer,Chandra tracer, Intraoral Tracer, Functiograph and Checkbite: A Clinical Study
    VV Nandini
    M R Ambedkar Dental College & Hospital , 1999
    1999.0
    Citations: 12
  • Evaluation of bacterial contamination of dental unit water Lines and the efficacy of a commercially available disinfectant
    VK Venkatesh, NV Vidyashree, A Parameswaran, D Kandaswamy
    Journal of Conservative Dentistry and Endodontics 9 (3), 93-98 , 2006
    2006.0
    Citations: 10
  • Influence of Titania Nanotubes Diameter on Its Antibacterial Efficacy against Periodontal Pathogens: An In vitro Analysis
    TG S. Raja Rajeswari, Vidyashree Nandini , Agilan Perumal , Rajendran
    Journal of Pharmacy & BioAllied Sciences 13 (S), 284-88 , 2021
    2021.0
    Citations: 9
  • Evaluation of Physical Properties of Denture Base Resins Containing Silver Nanoparticles of Aloe barbadensis Miller, Morinda citrifolia, and Boesenbergia rotunda and Its Anti …
    S Kaul, S Ahmed, VV Nandini, J Lathief, S Boruah
    Cureus 15 (11) , 2023
    2023.0
    Citations: 7
  • Zirconia post-pressed ceramic core-supported all-ceramic crown: Case reports and 4-year follow-up
    VV Nandini, VK Venkatesh, D Kandaswamy
    The Journal of Indian Prosthodontic Society 7 (4), 199-202 , 2007
    2007.0
    Citations: 7
  • The prevalence of alveolar ridge defects according to Seibert's classification: a cross-sectional study
    KR Sadhana, VV Nandini
    Cureus 16 (12) , 2024
    2024.0
    Citations: 6
  • Comparison of the dimensional accuracy and surface detail reproduction of different impression materials under dry and moist conditions-An Invitro study.
    SA Jacob, SV Nayar, VV Nandini
    International Journal of Contemporary Dentistry 3 (2) , 2012
    2012.0
    Citations: 6
  • Goethite nanofibers as bio-fillers in dental composite resin
    D Sihivahanan, V Nandini, E Rajesh, N Anitha
    Indian J. Med. Forensic Med. Toxicol 14, 1488-1491 , 2020
    2020.0
    Citations: 5
  • Alginate impressions: a practical perspective. J Conserv Dent 2008; 11: 37-41
    VV Nandini, KV Venkatesh, KC Nair
    Citations: 5