Synthesis Approaches, Designs, and Processing Methods of Two-Dimensional Nanomaterials Two Dimensional Nanomaterials Based Polymer Nanocomposites Processing Properties and Applications, 2024
Improved Corrosion Resistance Behaviour of AlSi10Mg Alloy due to Selective Laser Melting Abhishek Tiwari, Gaurav Singh, Rengaswamy Jayaganthan Coatings, 2023 The corrosion behaviour of AlSi10Mg alloy produced by selective laser melting (SLM) under two different atmospheres, namely argon and nitrogen, was compared to that of AlSi10Mg alloy that had been cast. The present study demonstrates the systematic electrochemical behaviour of selective-laser-melted (SLMed) AlSi10Mg. Potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS) were used to investigate the electrochemical behaviour, illustrating the degrading features of SLMed AlSi10Mg alloy in 0.1 M NaCl solution. The corrosion resistance of AlSi10Mg produced using selective laser melting was found to be 2–3 times greater than that of AlSi10Mg that had been cast. The degradation behaviour was also explained by SEM analysis of the corroded samples of SLMed AlSi10Mg and as-cast AlSi10Mg alloy. It may be deduced that the better corrosion resistance of AlSi10Mg produced through selective laser melting is due to the fast cooling rate associated with the solidification of AlSi10Mg alloy fabricated through selective laser melting, compared with the slow cooling rate associated with the solidification of AlSi10Mg produced by casting.
Mechanical Behaviour, Microstructural Characteristics and flow stress modelling of Additively Manufactured 17-4 PH Stainless Steel B Kalita, S Gairola, G Singh, D Kesavan, R Jayaganthan Materials Chemistry and Physics, 131364 , 2025 2025 Citations: 1
Optimising mechanical properties and microstructural evolution in additively manufactured Al-Cu-Mg-Ti alloy through post-annealing treatment. S Gairola, G Singh, R Jayaganthan Materials Science and Engineering: A, 148831 , 2025 2025 Citations: 2
On the prediction of flow stress behavior of additively manufactured AlSi10Mg for high temperature applications S Gairola, G Singh, R Jayaganthan Journal of Materials Engineering and Performance 34 (7), 5785-5801 , 2025 2025 Citations: 11
Al–Ce-Based Alloys: Processing, Mechanical Properties, and High-Temperature Stability HW Odhiambo, G Singh, M Tasneem, MA Soare, J Leszczewicz, J Cui, ... TMS Annual Meeting & Exhibition, 87-96 , 2025 2025 Citations: 2
Effect of thermomechanical processing on mechanical properties and the microstructure of binary Al-Ce alloy G Singh, HW Odhiambo, MHB Tasneem, G Ouyang, MA Soare, J Cui, ... Materials Science and Engineering: A 916, 147395 , 2024 2024 Citations: 16
Synthesis Approaches, Designs, and Processing Methods of Two‐Dimensional Nanomaterials R Anant, A Tiwari, S Sundaramurthy, V Vijay, G Singh Two‐Dimensional Nanomaterials‐Based Polymer Nanocomposites: Processing … , 2024 2024 Citations: 5
Hot deformation behaviour of Swaged Zircaloy-4 at varying strain rate and its microstructural evolution G Singh, S Gairola, R Verma, R Jayaganthan Materials Characterization 212, 113951 , 2024 2024 Citations: 8
High temperature performance of additively manufactured Al 2024 alloy: Constitutive modelling, dynamic recrystallization evolution and kinetics S Gairola, G Singh, R Jayaganthan, J Ajay Journal of Materials Research and Technology 25, 3425-3443 , 2023 2023 Citations: 30
Improved corrosion resistance behaviour of AlSi10Mg alloy due to selective laser melting A Tiwari, G Singh, R Jayaganthan Coatings 13 (2), 225 , 2023 2023 Citations: 32
The effect of die design on residual stresses of Zr-4 alloy processed by swaging G Singh, R Raj, KIV Narayanan, UK Arora, R Jayaganthan Procedia Structural Integrity 46, 149-154 , 2023 2023 Citations: 2
Effect of Friction Coefficient and Feed Rates on Residual Stresses of Zr-4 Processed by Swaging G Singh, VC Raghuram, KI Vishnu Narayanan, UK Arora, R Jayaganthan International Symposium on Plasticity and Impact Mechanics, 53-61 , 2022 2022
Influence of texture and microstructural evolution on ductility and tensile behaviour of annealed Zircaloy-4 processed through swaging G Singh, R Verma, R Jayaganthan Journal of Materials Research and Technology 19, 4536-4542 , 2022 2022 Citations: 4
Effect of swaging feed rate and annealing phenomena on tensile, fracture toughness and microstructural evolution of Zr-4 alloy G Singh, R Verma, KIV Narayanan, UK Arora, R Jayaganthan Materials Science and Engineering: A 831, 142219 , 2022 2022 Citations: 12
Review on surface treatment for implant infection via gentamicin and antibiotic releasing coatings A Tiwari, P Sharma, B Vishwamitra, G Singh Coatings 11 (8), 1006 , 2021 2021 Citations: 44
Finite element analysis and experimental evaluation of residual stress of Zr-4 alloys processed through swaging G Singh, B Kalita, KI Vishnu Narayanan, UK Arora, MM Mahapatra, ... Metals 10 (10), 1281 , 2020 2020 Citations: 29
Texture analysis and fracture behavior of zircaloy-4 processed through swaging G Singh, R Jayaganthan, UK Arora, KI Vishnu Narayanan, D Srivastava Metallography, Microstructure, and Analysis 9 (2), 273-284 , 2020 2020 Citations: 10
Tensile and fracture behaviour of Zr-4 alloy processed through swaging G Singh, A Tiwari, V Agarwal, R Jayaganthan, KI Vishnu Narayanan, ... Transactions of the Indian Institute of Metals 73 (4), 955-965 , 2020 2020 Citations: 8
Nanocrystalline Cermet Coatings for Erosion–Corrosion Protection A Tiwari, S Seman, G Singh, R Jayaganthan Coatings 9, 400 , 2019 2019 Citations: 44
MOST CITED SCHOLAR PUBLICATIONS
Review on surface treatment for implant infection via gentamicin and antibiotic releasing coatings A Tiwari, P Sharma, B Vishwamitra, G Singh Coatings 11 (8), 1006 , 2021 2021 Citations: 44
Nanocrystalline Cermet Coatings for Erosion–Corrosion Protection A Tiwari, S Seman, G Singh, R Jayaganthan Coatings 9, 400 , 2019 2019 Citations: 44
Improved corrosion resistance behaviour of AlSi10Mg alloy due to selective laser melting A Tiwari, G Singh, R Jayaganthan Coatings 13 (2), 225 , 2023 2023 Citations: 32
High temperature performance of additively manufactured Al 2024 alloy: Constitutive modelling, dynamic recrystallization evolution and kinetics S Gairola, G Singh, R Jayaganthan, J Ajay Journal of Materials Research and Technology 25, 3425-3443 , 2023 2023 Citations: 30
Finite element analysis and experimental evaluation of residual stress of Zr-4 alloys processed through swaging G Singh, B Kalita, KI Vishnu Narayanan, UK Arora, MM Mahapatra, ... Metals 10 (10), 1281 , 2020 2020 Citations: 29
Effect of thermomechanical processing on mechanical properties and the microstructure of binary Al-Ce alloy G Singh, HW Odhiambo, MHB Tasneem, G Ouyang, MA Soare, J Cui, ... Materials Science and Engineering: A 916, 147395 , 2024 2024 Citations: 16
Effect of swaging feed rate and annealing phenomena on tensile, fracture toughness and microstructural evolution of Zr-4 alloy G Singh, R Verma, KIV Narayanan, UK Arora, R Jayaganthan Materials Science and Engineering: A 831, 142219 , 2022 2022 Citations: 12
On the prediction of flow stress behavior of additively manufactured AlSi10Mg for high temperature applications S Gairola, G Singh, R Jayaganthan Journal of Materials Engineering and Performance 34 (7), 5785-5801 , 2025 2025 Citations: 11
Texture analysis and fracture behavior of zircaloy-4 processed through swaging G Singh, R Jayaganthan, UK Arora, KI Vishnu Narayanan, D Srivastava Metallography, Microstructure, and Analysis 9 (2), 273-284 , 2020 2020 Citations: 10
Hot deformation behaviour of Swaged Zircaloy-4 at varying strain rate and its microstructural evolution G Singh, S Gairola, R Verma, R Jayaganthan Materials Characterization 212, 113951 , 2024 2024 Citations: 8
Tensile and fracture behaviour of Zr-4 alloy processed through swaging G Singh, A Tiwari, V Agarwal, R Jayaganthan, KI Vishnu Narayanan, ... Transactions of the Indian Institute of Metals 73 (4), 955-965 , 2020 2020 Citations: 8
Synthesis Approaches, Designs, and Processing Methods of Two‐Dimensional Nanomaterials R Anant, A Tiwari, S Sundaramurthy, V Vijay, G Singh Two‐Dimensional Nanomaterials‐Based Polymer Nanocomposites: Processing … , 2024 2024 Citations: 5
Influence of texture and microstructural evolution on ductility and tensile behaviour of annealed Zircaloy-4 processed through swaging G Singh, R Verma, R Jayaganthan Journal of Materials Research and Technology 19, 4536-4542 , 2022 2022 Citations: 4
Optimising mechanical properties and microstructural evolution in additively manufactured Al-Cu-Mg-Ti alloy through post-annealing treatment. S Gairola, G Singh, R Jayaganthan Materials Science and Engineering: A, 148831 , 2025 2025 Citations: 2
Al–Ce-Based Alloys: Processing, Mechanical Properties, and High-Temperature Stability HW Odhiambo, G Singh, M Tasneem, MA Soare, J Leszczewicz, J Cui, ... TMS Annual Meeting & Exhibition, 87-96 , 2025 2025 Citations: 2
The effect of die design on residual stresses of Zr-4 alloy processed by swaging G Singh, R Raj, KIV Narayanan, UK Arora, R Jayaganthan Procedia Structural Integrity 46, 149-154 , 2023 2023 Citations: 2
Mechanical Behaviour, Microstructural Characteristics and flow stress modelling of Additively Manufactured 17-4 PH Stainless Steel B Kalita, S Gairola, G Singh, D Kesavan, R Jayaganthan Materials Chemistry and Physics, 131364 , 2025 2025 Citations: 1
Effect of Friction Coefficient and Feed Rates on Residual Stresses of Zr-4 Processed by Swaging G Singh, VC Raghuram, KI Vishnu Narayanan, UK Arora, R Jayaganthan International Symposium on Plasticity and Impact Mechanics, 53-61 , 2022 2022
