CHAPPELI SAI KIRAN

@cvr.ac.in

ASSISTANT PROFESSOR, MECHANICAL ENGINEERING
CVR COLLEGE OF ENGINEERING

CHAPPELI SAI KIRAN


               Download Compact PDF  
https://researchid.co/mynameiscsk

RESEARCH, TEACHING, or OTHER INTERESTS

Mechanical Engineering, Industrial and Manufacturing Engineering, Mechanics of Materials, Safety, Risk, Reliability and Quality
6

Scopus Publications

70

Scholar Citations

6

Scholar h-index

4

Scholar i10-index

Scopus Publications

  • Experimental Insights and ANN-Based Surface Roughness Prediction through analysis of Machined Surface Quality of Al2024/SiCp Composites
    Mohammed Saleh Al Ansari, A. Krishnakumari, M. Saravanan, Chappeli Sai Kiran, Seeniappan Kaliappan, Ramya Maranan
    E3s Web of Conferences, 2024
    This present research deals with optimizing machining parameters and surface quality improvement of Al2024/SiCp composites which are important materials used in the aerospace industry. The optimal quartet of factors was investigated to achieve the best outcomes using Taguchi design approach and includes cutting speed of 105 m/min, feed rate of 0.15 mm/rev, and depth of cut of 0.35 mm with a minimal level of roughness of 0.9 μm. An ANN model has been trained and validated, and a high level of predictive accuracy with an overall accuracy of 100% after 195 epochs has been achieved. The results indicated that systematic experimentation and the application of advanced modeling approaches, including the beneficial configuration of parameters and validated ANN model, can help to achieve a superior surface quality meeting the requirements of the aerospace industry. As a result, manufacturers can benefit from the proposed solutions to optimize their production practices, enhance the performance of components, and contribute to the field of aerospace engineering.
  • EDM machining of Ti6Al4V alloy using colloidal biosilica
    G. Mehershilpa, D. Prasad, Chappeli Sai Kiran, Amir Shaikh, K. Jayashree, S. Socrates
    Materials Today Proceedings, 2023
  • Surface roughness and topography of EDM machining of Inconel 718
    Suhas Prakashrao Patil, G. Leela Prasad, Chappeli Sai Kiran, Sanjeev Kumar, V. Ramasamy, H. Mohammed Ali
    Materials Today Proceedings, 2023
  • An Effective Storage Management for University Library using Weighted K-Nearest Neighbor Algorithm
    K.B. Glory, D. Venkatesan, G. Naga Rama Devi, Chappeli Sai Kiran, Prerana Nilesh Khairnar, S. Priya
    2022 IEEE North Karnataka Subsection Flagship International Conference Nkcon 2022, 2022
    The most fascinating topic in economic geography is the storage location-allocation problem. The storage serves as a transition point to lower the cost of transmission. To produce an accurate and approximate response, two a model based hybrid of k-means –Particle Swarm Optimization(KPSO) proposed in this work. When compared to the existing model, the proposed model formulation is simpler and easier to understand. The testing findings show that the proposed model makes better use of the computer's Random Access Memory (RAM), allowing us to solve medium-sized tasks. This approach cannot outperform the MIP model in terms of run time. The multi-assignment facility location queries are included in the extension of the CP formulations. Initial PSO solutions are produced using the well-known data clustering technique K-means. The experimental results demonstrate that in terms of time, objective value, and reliability of performance metrics, the KPSO method is superior to the PSO.
  • Development of Hybrid Optimum Model to Determine the Brake Uncertainties
    S. Punitha, M Selvaraj, N. Anil Kumar, G. Nagarajan, Chappeli Sai Kiran, Nagarjuna Karyemsett
    Mysurucon 2022 2022 IEEE 2nd Mysore Sub Section International Conference, 2022
    During rapid braking, the braking system must support the stresses exerted by the hydraulic rubber. The friction between the disc brakes and the disc effectively creates pressure. As a result of its rotation, the disks also suffer from rotational body pressures. Deformations resulting from these pressures could lead to material failure. As a result, it is essential to ensure that the groove pressures are kept to a minimum. The whole technique has been programmed into MATLAB to improve modules and operating systems. This involves using optimization methods such as the interior-point approach and also the Multi Parametric Genetic Algorithm (MPGA), and drawing Percentile charts for subsystems & operating system improvement & which require detailed verification.
  • Experimental investigation on the time-temperature history of Al-Si alloy while cooling in fresh and reclaimed silicate sand mould
    M. Venkata Ramana, C. Sai Kiran, Veeredhi Vasudeva Rao
    Materials Today Proceedings, 2020
    Metal casting is one the most important and a routine processes in a foundry industry in which hot molten metal is cast in to a mould cavity prepared with silica sand. Over the years, due to continuous use of naturally available silica sand, there are strong indications of shortage of this resource. Moreover, removal, transport and disposal of used silica sand costs money to the industry and also causes environmental concern at the location of dump sites. To address these two issues of reducing the consumption of fresh silica sand and to mitigate the environmental concern due to the disposal of used silica sand, recycling and reusing the used sand appears to be one possible solution. In the present investigation an attempt is made to establish the utility of reclaimed silicate bonded sand in place of fresh silica sand. An experimental test set up is developed to record time temperature histories of an alloy during cooling process in mould. Al-Si alloy is chosen to conduct the experiments. The time temperature histories of Al-Si alloy during its cooling in moulds made of fresh silica sand and reclaimed silicate bonded sand moulds were recorded and compared. It is observed that heat absorption capacity of reclaimed sand mould is slightly lower and resulted in slightly coarse grains of alloy that got solidified in a mould prepared from reclaimed sand. However, it is established in present investigation that the reclaimed sand can be successfully used in place of fresh silica sand.

RECENT SCHOLAR PUBLICATIONS

  • Cryptocurrency Spillover Dynamics and Engineering Education Challenges: A Computational and Experimental Framework for Real-World Problem Solving.
    JS Murtem, D Bose, SM Hussain, CS Kiran
    Advances in Consumer Research 2 (6), 2035-2040 , 2025
    2025.0
  • Machine learning based approaches for prompt diagnosis of aquatic plant ailments
    T Veeramakali, KG Saravanan, S Sivaramakrishnan, CS Kiran, ...
    Hybrid and Advanced Technologies, 42-47 , 2025
    2025.0
  • Enhancing rice grain classification using color features and self learning neural network model
    K Kasat, SMS Ali, JG Thatipudi, A Singh, CS Kiran, A Manjula
    Challenges in information, communication and computing technology, 425-430 , 2024
    2024.0
    Citations: 2
  • Biomechanical Analysis of a Femur Bone
    CS Kiran, MS Sai, PS Teja
    CVR Journal of Science and Technology 26 (1), 124-130 , 2024
    2024.0
  • Experimental Insights and ANN-Based Surface Roughness Prediction through analysis of Machined Surface Quality of Al2024/SiCp Composites
    MS Al Ansari, A Krishnakumari, M Saravanan, CS Kiran, S Kaliappan, ...
    E3S Web of Conferences 556, 01023 , 2024
    2024.0
  • EDM machining of Ti6Al4V alloy using colloidal biosilica
    G Mehershilpa, D Prasad, CS Kiran, A Shaikh, K Jayashree, S Socrates
    Materials Today: Proceedings , 2023
    2023.0
    Citations: 10
  • Surface roughness and topography of EDM machining of Inconel 718
    SP Patil, GL Prasad, CS Kiran, S Kumar, V Ramasamy, HM Ali
    Materials Today: Proceedings , 2023
    2023.0
    Citations: 14
  • An Effective Storage Management for University Library using Weighted K-Nearest Neighbor Algorithm
    KB Glory, D Venkatesan, GNR Devi, CS Kiran, PN Khairnar, S Priya
    2022 IEEE North Karnataka Subsection Flagship International Conference … , 2022
    2022.0
    Citations: 1
  • Development of hybrid optimum model to determine the brake uncertainties
    S Punitha, M Selvaraj, NA Kumar, G Nagarajan, CS Kiran, N Karyemsett
    2022 IEEE 2nd Mysore sub section international conference (MysuruCon), 1-4 , 2022
    2022.0
    Citations: 1
  • Enhancing the Efficiency and Performance of disk brake problem by implementing a novel optimization algorithm
    M Selvaraj, GR Thellaputta, G Nagarajan, KS Prasad, N Anu, CS Kiran
    Journal of Optoelectronics Laser 41 (3), 104-108 , 2022
    2022.0
  • DESIGN, ANALYSIS, AND BIO MANUFACTURING OF DISC BRAKES WITH CNC FOR REACTOR SAFETY
    CSAI KIRAN
    IJBPAS 10 (November, Special Issue), 1381-1392 , 2021
    2021.0
  • Experimental investigation on the time-temperature history of Al-Si alloy while cooling in fresh and reclaimed silicate sand mould
    MV Ramana, CS Kiran, VV Rao
    Materials Today: Proceedings 38, 2996-3004 , 2021
    2021.0
    Citations: 2
  • Structural Analysis of Pressurised Canister
    CS Kiran
    International Journal of Innovative Research in Science, Engineering and … , 2020
    2020.0
  • Modelling and Analysis of Brake Drum using ANSYS Workbench
    CS Kiran, MR Kumar, PS Reddy, T Venkatesh
    CVR Journal of Science and Technology 19 (1), 113-117 , 2020
    2020.0
    Citations: 3
  • Design, Fabrication and Analysis of Thermo Electric Refrigerator
    PRKCSK P.Srinivas Reddy
    International Journal of Current Engineering and Technology 9 (No.6), 835-839 , 2019
    2019.0
  • Design and analysis of shock absorber using ansys workbench
    CS Kiran
    CVR Journal of Science and Technology 17 (1), 144-149 , 2019
    2019.0
    Citations: 6
  • Design and finite element analysis of domestic LPG cylinder using ANSYS Workbench
    CS Kiran, J Sruthi
    CVR Journal of Science and Technology 14, 97-101 , 2018
    2018.0
    Citations: 13
  • Design and structural analysis of scissor jack using Ansys workbench
    CS Kiran, J Sruthi
    CVR Journal of Science and Technology 15, 101-105 , 2018
    2018.0
    Citations: 6
  • Design and crash analysis of a passenger car using ANSYS workbench
    CS Kiran, J Sruthi, SC Balaji
    CVR Journal of Science and Technology 13, 96-100 , 2017
    2017.0
    Citations: 12
  • Design and Structural Analysis of Leaf Spring using ANSYS Workbench
    CS Kiran, PR Kumar, V Rahul, BA Naidu

MOST CITED SCHOLAR PUBLICATIONS

  • Surface roughness and topography of EDM machining of Inconel 718
    SP Patil, GL Prasad, CS Kiran, S Kumar, V Ramasamy, HM Ali
    Materials Today: Proceedings , 2023
    2023.0
    Citations: 14
  • Design and finite element analysis of domestic LPG cylinder using ANSYS Workbench
    CS Kiran, J Sruthi
    CVR Journal of Science and Technology 14, 97-101 , 2018
    2018.0
    Citations: 13
  • Design and crash analysis of a passenger car using ANSYS workbench
    CS Kiran, J Sruthi, SC Balaji
    CVR Journal of Science and Technology 13, 96-100 , 2017
    2017.0
    Citations: 12
  • EDM machining of Ti6Al4V alloy using colloidal biosilica
    G Mehershilpa, D Prasad, CS Kiran, A Shaikh, K Jayashree, S Socrates
    Materials Today: Proceedings , 2023
    2023.0
    Citations: 10
  • Design and analysis of shock absorber using ansys workbench
    CS Kiran
    CVR Journal of Science and Technology 17 (1), 144-149 , 2019
    2019.0
    Citations: 6
  • Design and structural analysis of scissor jack using Ansys workbench
    CS Kiran, J Sruthi
    CVR Journal of Science and Technology 15, 101-105 , 2018
    2018.0
    Citations: 6
  • Modelling and Analysis of Brake Drum using ANSYS Workbench
    CS Kiran, MR Kumar, PS Reddy, T Venkatesh
    CVR Journal of Science and Technology 19 (1), 113-117 , 2020
    2020.0
    Citations: 3
  • Enhancing rice grain classification using color features and self learning neural network model
    K Kasat, SMS Ali, JG Thatipudi, A Singh, CS Kiran, A Manjula
    Challenges in information, communication and computing technology, 425-430 , 2024
    2024.0
    Citations: 2
  • Experimental investigation on the time-temperature history of Al-Si alloy while cooling in fresh and reclaimed silicate sand mould
    MV Ramana, CS Kiran, VV Rao
    Materials Today: Proceedings 38, 2996-3004 , 2021
    2021.0
    Citations: 2
  • An Effective Storage Management for University Library using Weighted K-Nearest Neighbor Algorithm
    KB Glory, D Venkatesan, GNR Devi, CS Kiran, PN Khairnar, S Priya
    2022 IEEE North Karnataka Subsection Flagship International Conference … , 2022
    2022.0
    Citations: 1
  • Development of hybrid optimum model to determine the brake uncertainties
    S Punitha, M Selvaraj, NA Kumar, G Nagarajan, CS Kiran, N Karyemsett
    2022 IEEE 2nd Mysore sub section international conference (MysuruCon), 1-4 , 2022
    2022.0
    Citations: 1
  • Cryptocurrency Spillover Dynamics and Engineering Education Challenges: A Computational and Experimental Framework for Real-World Problem Solving.
    JS Murtem, D Bose, SM Hussain, CS Kiran
    Advances in Consumer Research 2 (6), 2035-2040 , 2025
    2025.0
  • Machine learning based approaches for prompt diagnosis of aquatic plant ailments
    T Veeramakali, KG Saravanan, S Sivaramakrishnan, CS Kiran, ...
    Hybrid and Advanced Technologies, 42-47 , 2025
    2025.0
  • Biomechanical Analysis of a Femur Bone
    CS Kiran, MS Sai, PS Teja
    CVR Journal of Science and Technology 26 (1), 124-130 , 2024
    2024.0
  • Experimental Insights and ANN-Based Surface Roughness Prediction through analysis of Machined Surface Quality of Al2024/SiCp Composites
    MS Al Ansari, A Krishnakumari, M Saravanan, CS Kiran, S Kaliappan, ...
    E3S Web of Conferences 556, 01023 , 2024
    2024.0
  • Enhancing the Efficiency and Performance of disk brake problem by implementing a novel optimization algorithm
    M Selvaraj, GR Thellaputta, G Nagarajan, KS Prasad, N Anu, CS Kiran
    Journal of Optoelectronics Laser 41 (3), 104-108 , 2022
    2022.0
  • DESIGN, ANALYSIS, AND BIO MANUFACTURING OF DISC BRAKES WITH CNC FOR REACTOR SAFETY
    CSAI KIRAN
    IJBPAS 10 (November, Special Issue), 1381-1392 , 2021
    2021.0
  • Structural Analysis of Pressurised Canister
    CS Kiran
    International Journal of Innovative Research in Science, Engineering and … , 2020
    2020.0
  • Design, Fabrication and Analysis of Thermo Electric Refrigerator
    PRKCSK P.Srinivas Reddy
    International Journal of Current Engineering and Technology 9 (No.6), 835-839 , 2019
    2019.0
  • Design and Structural Analysis of Leaf Spring using ANSYS Workbench
    CS Kiran, PR Kumar, V Rahul, BA Naidu