Dr.T. Joby Titus

@skcet.ac.in

Associate Professor
Sri Krishna College of Engineering and Technology,Coimbatore

Dr.T. Joby Titus


               Download Compact PDF  
https://researchid.co/jobytitus2023

RESEARCH, TEACHING, or OTHER INTERESTS

Electronic, Optical and Magnetic Materials, Computer Networks and Communications, Electrical and Electronic Engineering, Environmental Engineering
15

Scopus Publications

205

Scholar Citations

6

Scholar h-index

5

Scholar i10-index

Scopus Publications

  • Deep Learning-Based Predictive System for Smart Agriculture
    M. Benedict Tephila, G. Ashitha, T. Joby Titus
    Lecture Notes in Networks and Systems, 2025
  • Enhanced Hydrogen Gas Sensing Performance of Gold Nanoparticle Decorated Nitrogen-Doped ZnO Nanomaterials for Improved Sensitivity and Rapid Response
    Sanjana Devi VS, Balraj B, Amuthameena S, Joby Titus T
    IEEE Transactions on Nanotechnology, 2025
    This study investigates the enhancement of hydrogen (H2) gas sensing in nitrogen-doped Zinc Oxide (ZnO) nanomaterials through the decoration of gold (Au) nanoparticles. ZnO nanoparticles were synthesized via a wet chemical method, doped with nitrogen at 0.5%, 1.0%, and 1.5% concentrations, and decorated with Au nanoparticles. Characterization using X-ray diffraction (XRD) revealed that the ZnO structure remained intact, with the addition of a peak corresponding to Au at 38.19°. Transmission electron microscopy (TEM) confirmed the uniform distribution of spherical Au nanoparticles on the ZnO surfaces. UV-Vis spectroscopy showed an enhanced absorption peak at 532 nm due to surface plasmon resonance. Photoluminescence (PL) spectra indicated reduced emission intensity, suggesting effective charge transfer between ZnO and Au. Gas sensing tests revealed that Au-decorated 1.0 wt. % N exhibited a maximum H2 gas response of 89% at 200 °C, significantly higher than the 46% response of non-decorated 1.0 wt. % N. Additionally, the Au-decorated N sensors demonstrated a rapid response time of 10 sec and a recovery time of 15 sec. These results highlight the potential of Au-decorated N-doped nanomaterials as highly efficient H2 gas sensors, combining enhanced sensitivity with fast response kinetics.
  • Fuzzy-Based Routing Scheme with Reliable Transmission Enhanced by Deep Learning for Wireless Sensor Networks
    T. Joby Titus, Aakash Raja K M, Bharathevaasan G, Abishek V S
    2024 International Conference on System Computation Automation and Networking Icscan 2024, 2024
    The advent of fifth-generation (5G) communication technologies is set to transform the global Internet of Everything (IoE) by linking numerous physical devices to the Internet. This extensive connectivity plays a vital role in IoT applications such as smart homes, city management, transportation, surveillance and the Internet of Medical Things (IoMT). Although wireless communication seeks to achieve broader coverage, lower latency, higher throughput, and increased reliability, challenges remain in optimizing limited communication resources and enhancing coding, modulation, and channel estimation methods. Managing transmission power is essential for mitigating interference and conserving energy. Our study introduces a fuzzy logic optimization routing (FLOR) method designed to extend the lifespan of Wireless Sensor Networks (WSNs) by making routing decisions based on nodes' energy levels and network distances. We evaluate FLOR's performance against current methods, showing the significant improvements in throughput, packet delivery ratio, average end-to-end delay and normalized routing overhead. In addition a deep learning-based strategy is proposed for sub-band assignment and power control in IoT cellular networks. Utilizing the convolutional neural networks (CNNs), we enhance the resource allocation, decrease latency, and improve energy efficiency. Our results demonstrate that deep learning methods outperform traditional techniques, offering faster speeds, reduced latency, and better energy efficiency. The integration of deep learning with edge computing and network slicing further benefits various IoT applications, boosting network performance, reliability, and energy efficiency.
  • IMPROVING POLARIZATION AND IMPEDANCE OF QUAD-PORT MIMO NETWORKS USING DIFFERENTIAL EVOLUTION IN 6G TECHNOLOGY
    Journal of the Balkan Tribological Association, 2024
  • Impact of Capital Adequacy and Risk on Bank Performance: An Empirical Study
    Asif Pervez, R. V. Naveenan, Ali Hazim Alyamoor, Rohit Bansal, Ankur Gupta, T. Joby Titus
    Aip Conference Proceedings, 2023
  • Technical Study on 5G Using Soft Computing Methods
    J. Divakaran, Somashekhar Malipatil, Tareeq Zaid, M. Pushpalatha, Vilaskumar Patil, C. Arvind, T. Joby Titus, K. Srihari, M. Ragul Vignesh, Baswaraj Gadgay, Venkatesa Prabhu Sundramurthy
    Scientific Programming, 2022
    With increasing advancements in the field of telecommunication, the attainment of a higher data transfer rate is essentially a greater need to meet high-performance communication. The exploitation of the fuzzy system in the wireless telecommunication systems, especially in Fifth Generation Mobile Networks (or) 5G networks is a vital paradigm in telecommunication markets. A comprehensive survey is dealt in the paper, where it initially reviews the basic understanding of fuzzy systems over 5G telecommunication. The literature studies are collected from various repositories that include reference materials, Internet, and other books. The collection of articles is based on empirical or evidence-based from various peer-reviewed journals, conference proceedings, dissertations, and theses. Most of the existing soft computing models are streamlined to certain applications of 5G networking. Firstly, it is hence essential to provide the readers to find research gaps and new innovative models on wide varied applications of 5G. Secondly, it deals with the scenarios in which the fuzzy systems are developed under the 5G platform. Thirdly, it discusses the applicability of fuzzy logic systems on various 5G telecommunication applications. Finally, the paper derives the conclusions associated with various studies on the fuzzy systems that have been utilized for the improvement of 5G telecommunication systems.
  • Design and Implementation of PLC based water Curtain Nozzle Controller for Warehouse Application
    S. Sangamithra, S. Sakitha, R. Rajasree, T. Joby Titus
    Proceedings 5th International Conference on Computing Methodologies and Communication Iccmc 2021, 2021
    This artile proposes a way for smart control of fireside spreading within the warehouses. Warehouse assets include a huge array of amenities intended for the storage of varied commodities. The warehouses may vary counting on the sort of materials stored. The extent of automation in the warehouse depends on the storage capacity, and the retrieval mechanism. Therefore, the height of stacking commodities is the prevailing fire safety system to predict on the structure of building and the space for storage. The factors considered for implementing fire protection in warehouse design are building area, height, the storage methods, and therefore the commodity also as local rules and regulations. It is not an easy task to propose a fireplace protection design for the warehouses with such variations. To incorporate of these factors, a PLC based water curtain nozzle control is proposed to avoid the fast-spreading of fireside in warehouses.
  • IoT based Noise Detector with Automatic Recording System
    P. M. Benson Mansingh, T. Joby Titus, G. Sekar, A. Shankar
    Proceedings 5th International Conference on Computing Methodologies and Communication Iccmc 2021, 2021
    Talking loudly is an infuriating habit in an office environment as well as in industry the machine noise is quiet annoying. The office environment with loud co-workers can distract the work and reduce the work efficiency. The machine noise in an industry environment above 85dBA affects the hearing capacity. To help and solve this issue, a noise detector with instinctive recording device is proposed. This device informs the user about the noise level and whenever the noise level exceeds the limit, it automatically records the sound and its duration. This system finds wide advantage for labors in industry, which provides frequent warning information to the user if the noise limit exceeds.
  • Code controller embedded with 2-d plotter for garment embroidery machine
    K. Gayathri, B. Nagapriya, T.Joby Titus
    Proceedings of the 7th International Conference on Electrical Energy Systems Icees 2021, 2021
    The common problem with the existing embroidery machine is to identify the pattern of embroidery for the garment and to stitch using manpower. The large demand for embroidery layout in garment industry is not accomplished using manual stitching methods. Our proposed model proposes a smart embroidery machine which includes a G-Code controller for pattern generation and the pattern conversion to angular movements in motor is achieved by Arduino UNO microcontroller. A two dimensional adjustment in X-Y direction is utilized for needle movement and garment layer is obtained with respect to G-Code. The compact design provides flexibility for embroider to access large production of design patterns with reduced time and manpower.
  • BER ANALYSIS of CHANNEL CODING TECHNIQUES for 5G NETWORKS
    P M Benson Mansingh, T Joby Titus, M Yuvaraju
    Iop Conference Series Materials Science and Engineering, 2020
    All Achieving error free communication is the major challenge in wireless technology because it provides the basement for reliable communication. But, practically error free communication is not possible due to impairments caused in wireless channel. The practical option that is available for reliable communication with minimized error rate is a channel coding technique. The various channel encoding techniques used are RS, convolutional codes, turbo codes etc., in various generations of wireless communication. The advanced version of 5G technologies needs a new type of channel coding technique that focuses on low complexity and minimized bit error rate. In this system candidate error correction coding schemes that can be used for 5G technology is reviewed in terms of bit error rate and complexity. This proposed system mainly focuses on two channel coding techniques namely convolutional codes and LDPC codes. The LDPC codes are currently used in 4G technologies and its feasibility with 5G wireless communication is evaluated in terms of BER performance and complexity and it is compared with the coded and uncoded convolutional codes. The results show that LDPC codes outperform the other coded system in terms of BER and complexity, also channel capacity of the MIMO-OFDM system is achieved nearer to the Shannon limit by using LDPC codes. According to the conducted studies, it is evident that the LDPC codes are excellent in having improved BER performance such that it could be used for next generation wireless communication.
  • A Secured Biometric Voting System Using RFID Linked with the Aadhar Database
    P.M.Benson Mansingh, T.Joby Titus, V.S.Sanjana Devi
    2020 6th International Conference on Advanced Computing and Communication Systems Icaccs 2020, 2020
  • Design and fabrication of copra sweeping robot
    Emmanuel Gospel Raj R, , Joby Titus T, Sanjana Devi V. S, Nithya Priya S, Adeline Daisy R, , , , and
    International Journal of Innovative Technology and Exploring Engineering, 2019
  • Clock node capacity minimization using lookup table based controller for ultrasound and medical imaging processor
    T. Joby Titus, V. Vijayakumari
    Cluster Computing, 2019
  • Power model analysis using variable rate clock network in CMOS processor
    T. Joby Titus, V. Vijayakumari, B. Saranya, V.S. Sanjana Devi
    ACM International Conference Proceeding Series, 2016
  • Power optimization technique for VLSI circuits using fine grain clock controller at leaf nodes
    Asian Journal of Information Technology, 2014

RECENT SCHOLAR PUBLICATIONS

  • Enhanced Hydrogen Gas Sensing Performance of Gold Nanoparticle Decorated Nitrogen-Doped ZnO Nanomaterials for Improved Sensitivity and Rapid Response
    SD VS, B Balraj, S Amuthameena
    IEEE Transactions on Nanotechnology 24, 27-33 , 2024
    2024
    Citations: 1
  • IMPROVING POLARIZATION AND IMPEDANCE OF QUAD-PORT MIMO NETWORKS USING DIFFERENTIAL EVOLUTION IN 6G TECHNOLOGY
    S GOKULDEV, M SUGUNA, B ROSE, S GOKILA, J TITUS, SDV SUBIAH, ...
    https://scibulcom.net/en/article/vFs3FJrVOqDHS7gN36iU 30 (1), 10-20 , 2024
    2024
  • Impact of capital adequacy and risk on bank performance: An empirical study
    A Pervez, RV Naveenan, AH Alyamoor, R Bansal, A Gupta, TJ Titus
    AIP Conference Proceedings 2587 (1), 050023 , 2023
    2023
    Citations: 11
  • Research Article Technical Study on 5G Using Soft Computing Methods
    J Divakaran, S Malipatil, T Zaid, M Pushpalatha, V Patil, C Arvind, TJ Titus, ...
    2022
  • Technical study on 5G using soft computing methods
    J Divakaran, S Malipatil, T Zaid, M Pushpalatha, V Patil, C Arvind, ...
    Scientific Programming 2022 (1), 1570604 , 2022
    2022
    Citations: 51
  • Vehicle Collision Avoidance System Using Li-Fi
    PMB Mansingh, G Sekar, TJ Titus
    http://dx.doi.org/10.5772/intechopen.98616 , 2021
    2021
    Citations: 3
  • Design and Implementation of PLC based water Curtain Nozzle Controller for Warehouse Application
    S Sangamithra, S Sakitha, R Rajasree, TJ Titus
    2021 5th International Conference on Computing Methodologies and … , 2021
    2021
    Citations: 4
  • IoT based Noise Detector with Automatic Recording System
    PMB Mansingh, TJ Titus, G Sekar, A Shankar
    2021 5th International Conference on Computing Methodologies and … , 2021
    2021
    Citations: 4
  • Code Controller Embedded with 2-D Plotter for Garment Embroidery Machine
    K Gayathri, B Nagapriya, TJ Titus
    2021 7th International Conference on Electrical Energy Systems (ICEES), 645-647 , 2021
    2021
    Citations: 2
  • Ber analysis of channel coding techniques for 5g networks
    PM Benson Mansingh, TJ Titus, M Yuvaraju
    IOP Conference Series: Materials Science and Engineering 932 (1), 012091 , 2020
    2020
    Citations: 9
  • A secured biometric voting system using RFID linked with the Aadhar database
    PMB Mansingh, TJ Titus, VSS Devi
    2020 6th International Conference on Advanced Computing and Communication … , 2020
    2020
    Citations: 37
  • BER ANALYSIS OF CHANNEL CODING TECHNIQUES FOR 5G NETWORKS
    MPM BENSON, TJ Titus, M Yuvaraju
    IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Учредители: IOP … , 2020
    2020
    Citations: 1
  • Clock node capacity minimization using lookup table based controller for ultrasound and medical imaging processor
    TJ Titus, V Vijayakumari
    Cluster Computing 22 (Suppl 2), 4129-4134 , 2019
    2019
  • Determination and classification of blood types using image processing techniques
    G Ravindran, T Joby, M Pravin, P Pandiyan
    International Journal of Computer Applications 157 (1), 12-16 , 2017
    2017
    Citations: 54
  • Automatic Road Surveillance to Implement Vehicle Tra□ c Rule
    J Titus, S Sanjana, B Saranya, P Manikandan
    International Journal of Scientific Research 4, 87-90 , 2017
    2017
    Citations: 3
  • Analysis of Image Segmentation Techniques for Texture Feature Extraction
    G Ravindran, TJ Titus, V Ganesh, VSS Devi
    Int. J. Eng. Sci. Res. Technol 6, 66-71 , 2017
    2017
    Citations: 2
  • G-Code Controlled 2D Robotic Plotter
    TJ Titus, P Vinitha, M Nivetha, M Vasanthaalakshmi
    International Journal on Recent and Innovation Trends in Computing and … , 2017
    2017
    Citations: 4
  • Year of Publication: 2017
    G Ravindran, TJ Titus, M Pravin, P Pandiyan
    2017
  • Automotive crack detection for railway track using ultrasonic sensorz
    SSJ Kumar, TJ Titus, V Ganesh, VSS Devi
    International Journal of Engineering Technology and Computer Research … , 2016
    2016
    Citations: 18
  • Power model analysis using variable rate clock network in CMOS processor
    TJ Titus, V Vijayakumari, B Saranya, VSS Devi
    Proceedings of the 7th International Conference on Computing Communication … , 2016
    2016

MOST CITED SCHOLAR PUBLICATIONS

  • Determination and classification of blood types using image processing techniques
    G Ravindran, T Joby, M Pravin, P Pandiyan
    International Journal of Computer Applications 157 (1), 12-16 , 2017
    2017
    Citations: 54
  • Technical study on 5G using soft computing methods
    J Divakaran, S Malipatil, T Zaid, M Pushpalatha, V Patil, C Arvind, ...
    Scientific Programming 2022 (1), 1570604 , 2022
    2022
    Citations: 51
  • A secured biometric voting system using RFID linked with the Aadhar database
    PMB Mansingh, TJ Titus, VSS Devi
    2020 6th International Conference on Advanced Computing and Communication … , 2020
    2020
    Citations: 37
  • Automotive crack detection for railway track using ultrasonic sensorz
    SSJ Kumar, TJ Titus, V Ganesh, VSS Devi
    International Journal of Engineering Technology and Computer Research … , 2016
    2016
    Citations: 18
  • Impact of capital adequacy and risk on bank performance: An empirical study
    A Pervez, RV Naveenan, AH Alyamoor, R Bansal, A Gupta, TJ Titus
    AIP Conference Proceedings 2587 (1), 050023 , 2023
    2023
    Citations: 11
  • Ber analysis of channel coding techniques for 5g networks
    PM Benson Mansingh, TJ Titus, M Yuvaraju
    IOP Conference Series: Materials Science and Engineering 932 (1), 012091 , 2020
    2020
    Citations: 9
  • Design and Implementation of PLC based water Curtain Nozzle Controller for Warehouse Application
    S Sangamithra, S Sakitha, R Rajasree, TJ Titus
    2021 5th International Conference on Computing Methodologies and … , 2021
    2021
    Citations: 4
  • IoT based Noise Detector with Automatic Recording System
    PMB Mansingh, TJ Titus, G Sekar, A Shankar
    2021 5th International Conference on Computing Methodologies and … , 2021
    2021
    Citations: 4
  • G-Code Controlled 2D Robotic Plotter
    TJ Titus, P Vinitha, M Nivetha, M Vasanthaalakshmi
    International Journal on Recent and Innovation Trends in Computing and … , 2017
    2017
    Citations: 4
  • Vehicle Collision Avoidance System Using Li-Fi
    PMB Mansingh, G Sekar, TJ Titus
    http://dx.doi.org/10.5772/intechopen.98616 , 2021
    2021
    Citations: 3
  • Automatic Road Surveillance to Implement Vehicle Tra□ c Rule
    J Titus, S Sanjana, B Saranya, P Manikandan
    International Journal of Scientific Research 4, 87-90 , 2017
    2017
    Citations: 3
  • Code Controller Embedded with 2-D Plotter for Garment Embroidery Machine
    K Gayathri, B Nagapriya, TJ Titus
    2021 7th International Conference on Electrical Energy Systems (ICEES), 645-647 , 2021
    2021
    Citations: 2
  • Analysis of Image Segmentation Techniques for Texture Feature Extraction
    G Ravindran, TJ Titus, V Ganesh, VSS Devi
    Int. J. Eng. Sci. Res. Technol 6, 66-71 , 2017
    2017
    Citations: 2
  • Enhanced Hydrogen Gas Sensing Performance of Gold Nanoparticle Decorated Nitrogen-Doped ZnO Nanomaterials for Improved Sensitivity and Rapid Response
    SD VS, B Balraj, S Amuthameena
    IEEE Transactions on Nanotechnology 24, 27-33 , 2024
    2024
    Citations: 1
  • BER ANALYSIS OF CHANNEL CODING TECHNIQUES FOR 5G NETWORKS
    MPM BENSON, TJ Titus, M Yuvaraju
    IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Учредители: IOP … , 2020
    2020
    Citations: 1
  • Power Estimation in 6T Sram Using Recovery Boosting
    TJ Titus, VSS Devi
    International Journal of Innovations in Engineering and Technology 2 (1), 84-89 , 2013
    2013
    Citations: 1
  • IMPROVING POLARIZATION AND IMPEDANCE OF QUAD-PORT MIMO NETWORKS USING DIFFERENTIAL EVOLUTION IN 6G TECHNOLOGY
    S GOKULDEV, M SUGUNA, B ROSE, S GOKILA, J TITUS, SDV SUBIAH, ...
    https://scibulcom.net/en/article/vFs3FJrVOqDHS7gN36iU 30 (1), 10-20 , 2024
    2024
  • Research Article Technical Study on 5G Using Soft Computing Methods
    J Divakaran, S Malipatil, T Zaid, M Pushpalatha, V Patil, C Arvind, TJ Titus, ...
    2022
  • Clock node capacity minimization using lookup table based controller for ultrasound and medical imaging processor
    TJ Titus, V Vijayakumari
    Cluster Computing 22 (Suppl 2), 4129-4134 , 2019
    2019
  • Year of Publication: 2017
    G Ravindran, TJ Titus, M Pravin, P Pandiyan
    2017