Emad Makki, Ph.D.

Scopus Publications

Physicomechanical, microstructural morphological, and thermal characterizations of jute and coconut husk–based natural fibers reinforced hempcrete hurd composites for building and construction applications
Lalit Ranakoti, Akashdeep Negi, Ankit Negi, Brijesh Gangil, Prabhakar Bhandari, Raghubeer Singh, Shubham Sharma, Shashi Prakash Dwivedi, Pardeep Singh Bains, Emad Makki, Mohamed Abbas
Biomass Conversion and Biorefinery, 2025
Recent Advances in POM–TPU Hybrid Composites: Macromolecular Design and Multi-Scale Structure–Property Correlation
Emad Makki, Rasool Mohsenzadeh, Ali Alamry, Fawwaz Hazzazi
Journal of Macromolecular Science Part B Physics, 2025
Polyoxymethylene (POM) exhibits high crystallinity, dimensional stability, and low friction, yet its intrinsic brittleness and limited impact resistance restrict its use in dynamic environments. Blending POM with thermoplastic polyurethane (TPU) introduces molecular-level interactions particularly hydrogen bonding between carbonyl and urethane groups that generate a constrained amorphous interphase with semi-reversible physical crosslinks. This interphase governs secondary relaxations (α′/β) and segmental dynamics, enabling efficient energy dissipation and enhanced damping behavior. This review provides a comprehensive and critical synthesis of POM/TPU hybrid systems from a macromolecular physics perspective, emphasizing interfacial adhesion mechanisms, morphology evolution, and crystallization kinetics. The influence of compatibilizers, chain extenders, and fillers such as glass fibers, montmorillonite, and nano-calcium carbonate (CaCO3) is analyzed in tailoring phase dispersion, epitaxial crystal growth, hierarchical microstructure, and multi-scale toughening mechanisms. Comparative insights with other POM-based blends (e.g., POM/EPDM, POM/SEBS, POM/ABS, POM/PA6) further elucidate structure–property correlations and performance tradeoffs. The interplay between processing parameters, interphase architecture, and viscoelastic response is highlighted to establish a processing–structure–property framework. Finally, emerging opportunities in sustainable fillers, additive manufacturing, interfacial engineering, and data-driven multi-scale modeling are discussed as pathways toward next-generation, impact-resistant and recyclable acetal-based composites for lightweight engineering applications.
Performance of jack fruit methyl ester and pine oil blends with coconut shell nanoadditive biodiesel for automobile applications
G. Hima Bindu, M. Ganesh, S. Sathees Kumar, Pravat Ranjan Pati, Jayant Giri, T. Sathish, Emad Makki
Interactions, 2024
Harnessing solar power: Innovations in nanofluid-cooled segmented thermoelectric generators for exergy, economic, environmental, and thermo-mechanical excellence
Hisham Alghamdi, Chika Maduabuchi, Kingsley Okoli, Mohana Alanazi, Hassan Fagehi, Mohammed Alghassab, Emad Makki, Mohammad Alkhedher
Alexandria Engineering Journal, 2024
Addressing the imperative need for advancements in thermoelectric generation, this study pioneers an analysis of nanofluid-cooled solar segmented thermoelectric generators with non-uniform cross-sections. Insights into thermal management, structural integrity, and economic efficiency in thermoelectric systems are provided, employing a numerical model that accurately represents thermoelectric effects by accounting for temperature dependencies of semiconductor materials. Through research, exploration of diverse coolant strategies, including TiO 2 , Fe 3 O 4 , Al 2 O 3 , and graphene, offers key insights into their impact on cooling dynamics. Findings demonstrate that graphene nanofluid, operating at a flow velocity of 2 m/s, outperforms others, achieving optimal power generation of 221.77 mW and an exergy efficiency of 8.99 %. Additionally, at a concentrated irradiance of 595 kWm −2 , graphene leads in environmental benefits, with the highest CO 2 savings of 0.38 kgyr −1 , and demonstrates economic advantages with a cost-effective dollar per mW value of 3.79×10 −6 $mW −1 . Furthermore, the study verifies the structural integrity of these systems, with graphene achieving an optimal von Mises stress of 1.35 GPa at a semiconductor height of 0.2 mm. These advancements contribute to environmentally friendly and high-performance generators for sustainable energy solutions, paving the way for future innovations in thermoelectric technology. • Graphene nanofluid yields 221.77 mW power and 8.99 % exergy efficiency at 2 m/s. • At 595 kWm −2 , graphene saves highest CO 2 of 0.38 kgyr −1 . • Optimal von Mises stress of 1.35 GPa at 0.2 mm leg height • Minimized cost of electric power is 3.79×10 −6 $mW −1 . • Non-uniform TEGs assessed for sustainable, efficient energy practices.
Waste shrimp shell mediated Chitosan-Magnesium Oxide nanocomposite: Synthesis, characterization and exploitation towards acenaphthene removal from aqueous solution
J.Aravind Kumar, S. Sathish, D. Prabu, Jayant Giri, Emad Makki, J. Jayaprabakar, Gulnar K. Ziyayeva, Omirserik Baigenzhenov, T. Sathish, T.R. Praveenkumar
Alexandria Engineering Journal, 2024
Keeping the sustainability concept in view, a green, biocompatible, eco-friendly, and advantageous nano-composite was fabricated by impregnation of chitosan derived from waste shrimp shells onto Magnesium oxide nanoparticle (MgO) for exploiting in acenaphthene (ACN) removal from wastewater resources. The tested nanocomposite showed a high potential for ACN adsorption at pH 5.5. The thermodynamic evaluations laid the spontaneity nature of the process (∆G ≤-25.93 kjmol −1 ) bearing a ∆H value of 12.701 kjmol −1 which shows a favorable physisorption phenomenon. Kinetic evaluations demonstrated that the studied adsorption system conforms to pseudo-first order model to a greater extent. Other kinetic evaluations (Dumwald–Wagne/ Boyd model) revealed the important role of film diffusion in such an adsorption system, especially in the initial stages of the process. The equilibrium scrutinization under isothermal conditions displayed that the process has proceeded via mono-layer adsorption with a q max value of 116.88 mg/g (at 298 K), for which Langmuir model showed a high goodness-of-fit. Overall, the new green adsorbent was highly advantageous in removal of ACN, and hence it is worth to be checked for the possibility of removing similar contaminants from polluted agricultural wastewater resources. • Waste shrimp shells acted as a precursor for synthesizing MgO-CS nanocomposite. • MgO/chitosan nanocomposite was thoroughly tested to scrutinize its adsorption properties. • The tested nanocomposite showed a high potential for acenaphthene adsorption from water. • The new bio adsorbent was cost effective and easily regenerative. • It is worth that sorbent potential can also be checked for the possibility of removing similar contaminants
Bayesian neural networks for solar power forecasts in advanced thermoelectric systems
Hisham Alghamdi, Chika Maduabuchi, Kingsley Okoli, Abdullah Albaker, Mohammad Alobaid, Mohammed Alghassab, Emad Makki, Mohammad Alkhedher
Case Studies in Thermal Engineering, 2024
This study presents a Bayesian neural network for the comprehensive performance forecast of an advanced thermoelectric system featuring segmented thermocouples with variable area shape for optimal solar energy conversion. The training data is obtained from a three-dimensional numerical model developed in ANSYS software to account for the energy, exergy, and entropy flows in the thermoelectric module to maximize the power output, energy, and exergy efficiencies while minimizing the entropy generation and system irreversibilities. The thermodynamic model optimizes key parameters, including geometry (height, cross-section, and percentage skutterudite content) across realistic diverse heat fluxes and cooling coefficients. To facilitate a faster and more efficient optimization pipeline, various neural networks, leveraging algorithms like Levenberg-Marquardt, scaled conjugate gradient, and Bayesian regularization, are utilized for efficient data management and accurate performance prediction. The Bayesian neural network emerges as the most accurate and efficient model providing the lowest training and testing loss of ∼10−9. Furthermore, key findings highlight the importance of skutterudite content and solar concentration ratio. For instance, an optimal skutterudite content of 6.2 % at 25 Suns produces maximum power of 29.7 W, while 37 % skutterudite at 75 Suns minimizes exergy destruction. This study's methodology and findings contribute to designing more efficient clean energy systems and advancing sustainable energy goals.
Semiconductors for enhanced solar photovoltaic-thermoelectric 4E performance optimization: Multi-objective genetic algorithm and machine learning approach
Hisham Alghamdi, Chika Maduabuchi, Aminu Yusuf, Sameer Al-Dahidi, Sedat Ballikaya, Abdullah Albaker, Ahmed Alsafran, Mohammed Alghassab, Emad Makki, Mohammad Alkhedher
Results in Engineering, 2024
In this study, a groundbreaking exploration of a concentrated photovoltaic-thermoelectric (CPV-TE) module employing an unprecedented selection of six thermoelectric materials across diverse temperature ranges is presented. This work innovatively employs a multi-objective optimization framework that combines genetic algorithms and goal attainment methods, aiming to optimize energy, exergy, environmental, and economic (4 E) performance. Notably, this study is the first to construct and evaluate five regression-based machine learning models with an emphasis on minimal root mean squared error and mean absolute error for rapid CPV-TE performance predictions, essential for real-world applications. Our analysis unveils that among the tested materials, the CPV-TE module incorporating lead telluride (PbTe) achieves the highest 4 E performance, demonstrating a peak exergy efficiency of 14.2 %, and annual energy savings and carbon reduction of 13.5 kWh and 6.4 kg, respectively. Furthermore, the Gaussian Process Regression model is identified as the most effective among the machine learning models for forecasting performance across the materials. This study significantly advances the field by providing novel insights into thermoelectric material selection and optimization for CPV-TE modules, and establishing pioneering forecasting tools that catalyze the efficient deployment of these systems.
Purification and investigation of bio-glycerol as heat transfer fluid and as coolant in automobile radiators
Nivin Joy, J. Jayaprabakar, M. Anish, Jayant Giri, Emad Makki, T. Sathish
Case Studies in Thermal Engineering, 2024
Glycerol is a key by product of the biodiesel extraction process. The rapid growth of biodiesel establishments will continue to result in glycerol oversupply. Purified glycerol can be used as an antifreeze in automotive radiators since it has a freezing point of -30°C and a boiling temperature of 160°C. Heat transfer by automotive radiators is important in optimizing engine fuel economy. The goal of this research is to employ purified bio glycerol as a heat transfer fluid and a coolant in vehicle radiators. The proposed water mixed bio glycerol convective heat transfer rate is experimentally compared to standard ethylene glycol. The rate of heat transfer by bio glycerol is determined by passing the fluid through an automobile radiator test apparatus. For this objective, an Automobile Radiator test rig is devised and built. Experiments with distilled water blended bio-glycerol in volume ratios of 50:50, 70:30, and 60:40 were carried out, and the test findings revealed that the 70:30 water bio glycerol volume ratio created a higher heat transfer rate when compared to the water ethylene glycol mixture.
Enhancing the fire-resistant performance of concrete-filled steel tube columns with steel fiber-reinforced concrete
Christo George, S. Senthil Selvan, V. Sathish Kumar, G. Murali, Jayant Giri, Emad Makki, T. Sathish
Case Studies in Construction Materials, 2024
Due to their excellent mechanical features, concrete-filled steel tube (CFST) columns are usually employed in high-rise constructions; it is also significant to consider fire safety while designing buildings. The fire-resistance performance of fibre-reinforced CFST columns is superior to that of unreinforced CFST columns under identical conditions. The post-peak behavior of CFST columns can be enhanced by incorporating fibres to reduce the brittleness of concrete. The research on this topic is limited and considerable research gaps are available in the literature. This research examines the structural performance of steel fibre-reinforced concrete (SFRC) filled steel tubes exposed to ambient and elevated temperatures. For this purpose, fourteen CFST columns were investigated and separated into two groups. The first group of CFST columns was filled with three diverse grades of conventional concrete with and without fibres, which was subjected to ambient temperature. The second group is identical to the first group except all columns are exposed to a temperature of 1050℃. The parameters examined were the mechanical properties of concrete, load-carrying capacity, load-deflection response, axial load, and axial strain and ductility ratio. Furthermore, using different codes, a comparison was made for the column's empirically determined load-carrying capacity with the theoretical value. Besides, the morphological characteristics of concrete were examined using energy dispersive spectroscopy (EDS), scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR) and X-ray powder diffraction (XRD). The findings show that the SFRC-filled column has superior structural qualities when subjected to elevated temperatures. At high temperatures, calcium hydroxide decomposes, and the steel tube yields, causing the column to fail by premature local bucking.
Development and characterization of AZ91/AlN magnesium matrix composites via friction stir processing
T. Satish Kumar, Titus Thankachan, Abhijit Bhowmik, Emad Makki, Jayant Giri, Shirsendu Das
Aip Advances, 2024
Magnesium AZ91/AlN-based surface composites have been synthesized using the friction stir processing (FSP) technique. The influence of particle addition during FSP on microstructural and mechanical properties has been investigated. Composite plates of 5, 10, and 15 vol. % AlN were synthesized using two-pass FSP with an axial force of 10 KN, a tool travel speed of 40 mm/min, and a tool rotation speed of 1200 rpm. The AZ91/AlN surface composites were analyzed microscopically with the use of an optical microscope, an x-ray diffractometer, and a scanning electron microscope. The prepared composites were tested for hardness and tensile strength. Micrographs taken in the stir zone revealed a consistent distribution of AlN particles throughout the AZ91 matrix. The AZ91/AlN surface composites were tested for hardness and tensile strength, and the findings showed that the AlN particles improved the mechanical properties without significantly decreasing ductility. The fracture surfaces of the composites were studied, and the mechanisms of fracture were identified.
Performance investigation of a direct-cooled refrigerator with CuO-R600a as a nanorefrigerant
Hussain Pipwala, Ragesh Kapadia, Hitesh Panchal, Bharat Singh, Prateek D. Malwe, Abhinav Kumar, Emad Makki, Jayant Giri
Case Studies in Chemical and Environmental Engineering, 2024
A mathematical model for investigation of dry band location on 22 kV bushing with and without RTV coating: Experimental study
L. Kalaivani, R.V. Maheswari, Emad Makki, Bharat Singh, Sanjay B Warkad, Jayant Giri, B. Vigneshwaran, Alagar karthick, Musaddak Maher Abdul Zahra, Abhinav kumar, Hitesh Panchal
Methodsx, 2024
Hierarchically, Low Band Gap Nanohybrid InVO4-CdS Heterojunction for Visible Light-Driven Toxic Organic Dye Degradations
Balachandran Subramanian, Zhongshan Xu, Kumaravel Jeeva Jothi, Emad Makki, Selvamani Muthamizh, Dhilip Kumar Rajaiah, Natarajan Prakash, Nagarani Sandran, Jayant Giri, Feng Wang, Mingshu Yang
ACS Omega, 2024
Flax/ramie hybrid fibers enhanced with SiC nanoparticles
T. Sathish, Jayant Giri, R. Saravanan, Emad Makki
Aip Advances, 2024
Biodiesel Production from Food Industrial Waste of Soybean Oil using a Lipase-nanoparticle Bio-composite Catalyst
Sathish Thanikodi, Saravanan Rathinasamy, Jayant Giri, Aravind Kumar Jagadeesan, Emad Makki
Automotive Experiences, 2024
Mechanical (static and dynamic) characterization and thermal stability of hybrid green composites for engineering applications
S. Sathees Kumar, P. Shyamala, Pravat Ranjan Pati, Jayant Giri, Emad Makki, T. Sathish
Journal of Materials Research and Technology, 2024
Impact of nano-hybridization on flexural and impact behavior of basalt/glass fiber-epoxy composites for automotive structures
V. Boobalan, T. Sathish, Jayant Giri, Emad Makki
Aip Advances, 2024
Machinability of different cutting tool materials for electric discharge machining: A review and future prospects
M. S. Tufail, Jayant Giri, Emad Makki, T. Sathish, Rajkumar Chadge, Neeraj Sunheriya
Aip Advances, 2024
Momordica charantia leaf disease detection and treatment using agricultural mobile robot
Julius Fusic S, Sugumari T, Jayant Giri, Emad Makki, R. Sitharthan, Shunmathi Murugesan, Abhijit Bhowmik
Aip Advances, 2024
A comparative study on milling-induced surface roughness during milling of jute-epoxy and carbon-epoxy composites and optimization for better surface finish through Taguchi and RSM techniques
Murthy B. R. N., Anupama Hiremath, Jayant Giri, Emad Makki, Sathish T., Gururaj Bolar, Vishwanatha H. M.
Aip Advances, 2024
An inimitable Elman network based fire hawk controller and skill optimized power tracker with ultra gain converter for improving the performance of PV tied EV systems
Jaanaa Rubavathy S, Sungeetha D, Carmel Mary Belinda M J, Jayant Giri, Emad Makki, Hitesh Panchal, Gomathi S, Deepa P, Aravind Kumar J, Praveenkumar T R
Case Studies in Thermal Engineering, 2024
Experimental study on mechanical properties of FDM 3D printed polylactic acid fabricated parts using response surface methodology
Shashwath Patil, T. Sathish, Emad Makki, Jayant Giri
Aip Advances, 2024
Sisal and jute composite containing carbon nanotubes for improved mechanical and thermal performance
T. Sathish, Jayant Giri, Saravanan R., Emad Makki
Aip Advances, 2024
Influence of machining process of MoS2/B4C/Az31 Mg alloy composite and its tribological characteristics
Jothi Arunachalam, Saravanan R, T. Sathish, Emad Makki, Jayant Giri
Aip Advances, 2024
Microstructural characterization of in-situ MgAl2O4 nanoparticles reinforced Al–2Mg–1Si composite produced using the ultrasonic assisted stir casting process
T. Satish Kumar, Titus Thankachan, Jayant Giri, Emad Makki, R. Dhanasekar, Ajay Guru
Journal of Materials Research and Technology, 2024
An investigation into cut surface quality of Al6061/Al2O3/B4C composite using hydro-abrasive machining process
A. Muthulakshmanan, R. Adalarasan, M. Santhanakumar, A. Gnanavelbabu, Emad Makki, Jayant Giri
Aip Advances, 2024
Performance enhancement by tungsten trioxide and silicon dioxide mixed nanofluids in solar collector of evacuated tube type
T. Sathish, Saravanan Kathirvel, Yagya Dutta Dwivedi, N. Stalin, Jayant Giri, R. Saravanan, Emad Makki
Case Studies in Thermal Engineering, 2024
Implications of prolonged sub-zero environmental conditioning and temperature cooling on the microstructural morphological, and mechanical properties of SiC reinforced Al6061-T6 friction stir spot welded joints
Neeru Chaudhary, Sarbjit Singh, Mohinder Pal Garg, Hreetabh Kishore, Shubham Sharma, Shashi Prakash Dwivedi, Mohamed Abbas, M. Ijaz Khan, Emad Makki
Journal of Materials Research and Technology, 2024
Insitu synthesis of Al– MgAl2O4 composites and parametric optimization of tribological characteristics
Satish Kumar Thandalam, Titus Thankachan, Emad Makki, Jayant Giri, Sathish Thanikodi
Heliyon, 2024
A comprehensive review of critical analysis of biodegradable waste PCM for thermal energy storage systems using machine learning and deep learning to predict dynamic behavior
Aman Sharma, Pradeep Kumar Singh, Emad Makki, Jayant Giri, T. Sathish
Heliyon, 2024
Homogenization of Inconel 625 based periodic auxetic lattice structures with varying strut thickness
Akshansh Mishra, Vijaykumar S. Jatti, Eyob Messele Sefene, Emad Makki
APL Materials, 2024
The impact of 180° return bend inclination on pressure drop characteristics and phase distribution during oil-water flow
Mushtaque Momin, Faisal Rahmani, Emad Makki, Mukesh Sharma, Jayant Giri, T. Sathish
Heliyon, 2024
Navigating the novel nanoparticles: current insights, innovations, and future vistas in detection and treatment of cervical cancer
Seeta Devi, Jayant Giri, Emad Makki, Maneesha Rajendrakumar Suryavanshi
Nanocomposites, 2024
Utilization of response surface methodology to optimize the mechanical behaviour of flax/nano TiO2/Epoxy based hybrid composites under liquid nitrogen environment
Sheriff F. Mohammed Ajmal, L. Natrayan, Jayant Giri, Emad Makki, Mohd Asif Shah, Saurav Mallik
Frontiers in Materials, 2024
Perovskite materials with improved stability and environmental friendliness for photovoltaics
Sujit Kumar, Sasanka Sekhor Sharma, Jayant Giri, Emad Makki, T. Sathish, Hitesh Panchal
Frontiers in Mechanical Engineering, 2024
A comprehensive exploration of shape memory alloys: Fundamentals, structural reinforcements, nano-analysis, machine learning perspective, and emerging applications
Erukala Kalyan Kumar, Subhra Suchmitha Patel, Subrata Kumar Panda, Bhumesh K. Patle, Emad Makki, Jayant Giri
Mechanics of Advanced Materials and Structures, 2024
Evaluation and optimization of mechanical properties of laterized concrete containing fly ash and steel fiber using Taguchi robust design method
Sharanabasava Patil, B. Ramesh, T. Sathish, A. Saravanan, Hamad Almujibah, Hitesh Panchal, Emad Makki, Jayant Giri
Alexandria Engineering Journal, 2024
Latest Advancements in Solar Photovoltaic-Thermoelectric Conversion Technologies: Thermal Energy Storage Using Phase Change Materials, Machine Learning, and 4E Analyses
Hisham Alghamdi, Chika Maduabuchi, Kingsley Okoli, Mohammad Alobaid, Mohammed Alghassab, Ahmed S. Alsafran, Emad Makki, Mohammad Alkhedher
International Journal of Energy Research, 2024
Implications of agro-industrial wastes on the durability and erosion characteristics of unfired soil-blocks reinforced with paddy straw fibers: Sustainable earth construction
Tarun Sharma, Sandeep Singh, Shubham Sharma, Umesh Sharma, Prashant Sharma, Anita Gehlot, Abhinav Kumar, Emad Makki, Mohamed Abbas
Journal of Engineered Fibers and Fabrics, 2024
Development and performance evaluation of (Sm1-xNdx)0.2O2-δ electrolyte for low-temperature solid oxide fuel cell application
T.L. Gilbile, A.P. Pandhare, Emad Makki, Bharat Singh, D.V. Khankal, A.A. Godse, Hitesh Panchal, Jayant Giri, Prateek D. Malwe, Abhinav Kumar
Energy Conversion and Management X, 2024
Optimization of surface roughness in milling of EN 24 steel with WC-Coated inserts using response surface methodology: analysis using surface integrity microstructural characterizations
Shashwath Patil, Thanikodi Sathish, P. S. Rao, M. S. Prabhudev, V. Vijayan, S. Rajkumar, Shubham Sharma, Abhinav Kumar, Mohamed Abbas, Emad Makki
Frontiers in Materials, 2024
An application of hybrid Taguchi-ANN to predict tool wear for turning EN24 material
Prashant D. Kamble, Jayant Giri, Emad Makki, Neeraj Sunheriya, Shilpa B. Sahare, Rajkumar Chadge, Chetan Mahatme, Pallavi Giri, Sathish T., Hitesh Panchal
Aip Advances, 2024
Green synthesis and studies on citrus medica leaf extract-mediated Au-ZnO nanocomposites: A sustainable approach for efficient photocatalytic degradation of rhodamine B dye in aqueous media
Tiba Ibrahim, Luma Hakim Ali, Wisam Aqeel Muslim, Karrar Hazim Salem, Kahtan A. Mohammed, Rahman S. Zabibah, Mohammed Ayad Alkhafaji, Zahraa Falah Khudair, Shubham Sharma, Emad Makki, Mohamed Abbas
Green Processing and Synthesis, 2024
Optimization of Process Parameters to Minimize the Surface Roughness of Abrasive Water Jet Machined Jute/Epoxy Composites for Different Fiber Inclinations
B. R. N. Murthy, Emad Makki, Srinivasa Rao Potti, Anupama Hiremath, Gururaj Bolar, Jayant Giri, T. Sathish
Journal of Composites Science, 2023
From sunlight to power: Enhancing 4E performance with two-stage segmented thermoelectric generators in concentrated solar applications
Hisham Alghamdi, Chika Maduabuchi, Kingsley Okoli, Abdullah Albaker, Mohana Alanazi, Mohammed Alghassab, Emad Makki, Mohammad Alkhedher
Journal of Cleaner Production, 2023
E-waste CRT panel glass reinforced magnesium composite processed through powder metallurgy: fabrication and mechanical performance evaluation
P.M. Gopal, K. Soorya Prakash, Emad Makki, V. Kavimani, Jayant Giri, T. Sathish
Journal of Materials Research and Technology, 2023
Influence of Bearing Wear on the Stability and Modal Characteristics of a Flexible Rotor Supported on Powder-Lubricated Journal Bearings
Faisal Rahmani, Emad Makki, Jayant Giri
Lubricants, 2023
Effect of pressure profile of shock waves on lipid membrane deformation
Ralph Kfoury, Bahador Marzban, Emad Makki, Michael L. Greenfield, Hongyan Yuan
Plos One, 2019
Response of Coated Laminated Glass Panels Subjected to Combined Blast and Temperature Loadings
Emad A. Makki, Prathmesh Naik Parrikar, Arun Shukla
Journal of Dynamic Behavior of Materials, 2015

RECENT SCHOLAR PUBLICATIONS

Recent Advances in POM–TPU Hybrid Composites: Macromolecular Design and Multi-Scale Structure–Property Correlation
E Makki, R Mohsenzadeh, A Alamry, F Hazzazi
Journal of Macromolecular Science, Part B, 1-26 , 2025
2025
Physicomechanical, microstructural morphological, and thermal characterizations of jute and coconut husk–based natural fibers reinforced hempcrete hurd composites for building …
L Ranakoti, A Negi, A Negi, B Gangil, P Bhandari, R Singh, S Sharma, ...
Biomass Conversion and Biorefinery 15 (6), 9629-9640 , 2025
2025
Citations: 6
Navigating the novel nanoparticles: current insights, innovations, and future vistas in detection and treatment of cervical cancer
S Devi, J Giri, E Makki, MR Suryavanshi
Nanocomposites 10 (1), 256-282 , 2024
2024
Citations: 9
A comprehensive exploration of shape memory alloys: Fundamentals, structural reinforcements, nano-analysis, machine learning perspective, and emerging applications
EK Kumar, SS Patel, SK Panda, BK Patle, E Makki, J Giri
Mechanics of Advanced Materials and Structures 31 (29), 11450-11483 , 2024
2024
Citations: 35
Harnessing solar power: Innovations in nanofluid-cooled segmented thermoelectric generators for exergy, economic, environmental, and thermo-mechanical excellence
H Alghamdi, C Maduabuchi, K Okoli, M Alanazi, H Fagehi, M Alghassab, ...
Alexandria Engineering Journal 106, 147-163 , 2024
2024
Citations: 7
Waste shrimp shell mediated Chitosan-Magnesium Oxide nanocomposite: Synthesis, characterization and exploitation towards acenaphthene removal from aqueous solution
JA Kumar, S Sathish, D Prabu, J Giri, E Makki, J Jayaprabakar, ...
Alexandria Engineering Journal 104, 124-135 , 2024
2024
Citations: 213
Bayesian neural networks for solar power forecasts in advanced thermoelectric systems
H Alghamdi, C Maduabuchi, K Okoli, A Albaker, M Alobaid, M Alghassab, ...
Case Studies in Thermal Engineering 61, 104940 , 2024
2024
Citations: 8
Semiconductors for enhanced solar photovoltaic-thermoelectric 4E performance optimization: Multi-objective genetic algorithm and machine learning approach
H Alghamdi, C Maduabuchi, A Yusuf, S Al-Dahidi, S Ballikaya, A Albaker, ...
Results in Engineering 23, 102573 , 2024
2024
Citations: 10
Biodiesel Production from Food Industrial Waste of Soybean Oil using a Lipase-nanoparticle Bio-composite Catalyst
S Thanikodi, S Rathinasamy, J Giri, AK Jagadeesan, E Makki
Automotive Experiences 7 (2), 189-206 , 2024
2024
Citations: 7
Purification and investigation of bio-glycerol as heat transfer fluid and as coolant in automobile radiators
N Joy, J Jayaprabakar, M Anish, J Giri, E Makki, T Sathish
Case Studies in Thermal Engineering 60, 104656 , 2024
2024
Citations: 151
Performance of jack fruit methyl ester and pine oil blends with coconut shell nanoadditive biodiesel for automobile applications
GH Bindu, M Ganesh, SS Kumar, PR Pati, J Giri, T Sathish, E Makki
Interactions 245 (1), 163 , 2024
2024
Citations: 157
Enhancing the fire-resistant performance of concrete-filled steel tube columns with steel fiber-reinforced concrete
C George, SS Selvan, VS Kumar, G Murali, J Giri, E Makki, T Sathish
Case Studies in Construction Materials 20, e02741 , 2024
2024
Citations: 22
Development and characterization of AZ91/AlN magnesium matrix composites via friction stir processing
TS Kumar, T Thankachan, A Bhowmik, E Makki, J Giri, S Das
AIP Advances 14 (6) , 2024
2024
Citations: 8
A mathematical model for investigation of dry band location on 22 kV bushing with and without RTV coating: Experimental study
L Kalaivani, RV Maheswari, E Makki, B Singh, SB Warkad, J Giri, ...
MethodsX 12, 102579 , 2024
2024
Performance investigation of a direct-cooled refrigerator with CuO-R600a as a nanorefrigerant
H Pipwala, R Kapadia, H Panchal, B Singh, PD Malwe, A Kumar, E Makki, ...
Case Studies in Chemical and Environmental Engineering 9, 100569 , 2024
2024
Citations: 15
Green synthesis and studies on citrus medica leaf extract-mediated Au–ZnO nanocomposites: A sustainable approach for efficient photocatalytic degradation of rhodamine B dye in …
T Ibrahim, LH Ali, WA Muslim, KH Salem, KA Mohammed, RS Zabibah, ...
Green Processing and Synthesis 13 (1), 20230199 , 2024
2024
Citations: 13
Hierarchically, Low Band Gap Nanohybrid InVO 4 -CdS Heterojunction for Visible Light-Driven Toxic Organic Dye Degradations
B Subramanian, Z Xu, K Jeeva Jothi, E Makki, S Muthamizh, DK Rajaiah, ...
ACS omega 9 (20), 21864-21878 , 2024
2024
Citations: 17
Mechanical (static and dynamic) characterization and thermal stability of hybrid green composites for engineering applications
SS Kumar, P Shyamala, PR Pati, J Giri, E Makki, T Sathish
Journal of Materials Research and Technology 30, 7214-7227 , 2024
2024
Citations: 85
Implications of agro-industrial wastes on the durability and erosion characteristics of unfired soil-blocks reinforced with paddy straw fibers: Sustainable earth construction
T Sharma, S Singh, S Sharma, U Sharma, P Sharma, A Gehlot, A Kumar, ...
Journal of Engineered Fibers and Fabrics 19, 15589250241239235 , 2024
2024
Citations: 8
Flax/ramie hybrid fibers enhanced with SiC nanoparticles
T Sathish, J Giri, R Saravanan, E Makki
AIP Advances 14 (5) , 2024
2024
Citations: 3

MOST CITED SCHOLAR PUBLICATIONS

Performance enhancement by tungsten trioxide and silicon dioxide mixed nanofluids in solar collector of evacuated tube type
T Sathish, S Kathirvel, YD Dwivedi, N Stalin, J Giri, R Saravanan, E Makki
Case Studies in Thermal Engineering 55, 104098 , 2024
2024
Citations: 219
Optimization of process parameters to minimize the surface roughness of abrasive water jet machined jute/epoxy composites for different fiber inclinations
BRN Murthy, E Makki, SR Potti, A Hiremath, G Bolar, J Giri, T Sathish
Journal of Composites Science 7 (12), 498 , 2023
2023
Citations: 215
Waste shrimp shell mediated Chitosan-Magnesium Oxide nanocomposite: Synthesis, characterization and exploitation towards acenaphthene removal from aqueous solution
JA Kumar, S Sathish, D Prabu, J Giri, E Makki, J Jayaprabakar, ...
Alexandria Engineering Journal 104, 124-135 , 2024
2024
Citations: 213
Optimization of Surface Roughness in Milling of EN 24 Steel with WC-Coated inserts using Response Surface Methodology: Analysis using Surface integrity microstructural …
S Patil, T Sathish, PS Rao, MS Prabhudev, V Vijayan, S Rajkumar, ...
Frontiers in Materials 11, 1269608 , 2024
2024
Citations: 189
Performance of jack fruit methyl ester and pine oil blends with coconut shell nanoadditive biodiesel for automobile applications
GH Bindu, M Ganesh, SS Kumar, PR Pati, J Giri, T Sathish, E Makki
Interactions 245 (1), 163 , 2024
2024
Citations: 157
Purification and investigation of bio-glycerol as heat transfer fluid and as coolant in automobile radiators
N Joy, J Jayaprabakar, M Anish, J Giri, E Makki, T Sathish
Case Studies in Thermal Engineering 60, 104656 , 2024
2024
Citations: 151
Mechanical (static and dynamic) characterization and thermal stability of hybrid green composites for engineering applications
SS Kumar, P Shyamala, PR Pati, J Giri, E Makki, T Sathish
Journal of Materials Research and Technology 30, 7214-7227 , 2024
2024
Citations: 85
E-waste CRT panel glass reinforced magnesium composite processed through powder metallurgy: fabrication and mechanical performance evaluation
PM Gopal, KS Prakash, E Makki, V Kavimani, J Giri, T Sathish
Journal of Materials Research and Technology 27, 2939-2952 , 2023
2023
Citations: 82
A comprehensive review of critical analysis of biodegradable waste PCM for thermal energy storage systems using machine learning and deep learning to predict dynamic behavior
A Sharma, PK Singh, E Makki, J Giri, T Sathish
Heliyon 10 (3) , 2024
2024
Citations: 71
Machinability of different cutting tool materials for electric discharge machining: A review and future prospects
MS Tufail, J Giri, E Makki, T Sathish, R Chadge, N Sunheriya
AIP Advances 14 (4) , 2024
2024
Citations: 45
Latest advancements in solar photovoltaic‐thermoelectric conversion technologies: thermal energy storage using phase change materials, machine learning, and 4E analyses
H Alghamdi, C Maduabuchi, K Okoli, M Alobaid, M Alghassab, ...
International Journal of Energy Research 2024 (1), 1050785 , 2024
2024
Citations: 39
A comprehensive exploration of shape memory alloys: Fundamentals, structural reinforcements, nano-analysis, machine learning perspective, and emerging applications
EK Kumar, SS Patel, SK Panda, BK Patle, E Makki, J Giri
Mechanics of Advanced Materials and Structures 31 (29), 11450-11483 , 2024
2024
Citations: 35
An application of hybrid Taguchi-ANN to predict tool wear for turning EN24 material
PD Kamble, J Giri, E Makki, N Sunheriya, SB Sahare, R Chadge, ...
AIP Advances 14 (1) , 2024
2024
Citations: 32
Microstructural characterization of in-situ MgAl2O4 nanoparticles reinforced Al–2Mg–1Si composite produced using the ultrasonic assisted stir casting process
TS Kumar, T Thankachan, J Giri, E Makki, R Dhanasekar, A Guru
Journal of Materials Research and Technology 29, 2458-2467 , 2024
2024
Citations: 30
Development of Hybrid Optimization Model Using Grey‐ANFIS‐Jaya Algorithm for CNC Drilling of Aluminium Alloy
KL Narasimhamu, M Natarajan, P Thejasree, E Makki, J Giri, N Sunheriya, ...
Journal of Engineering 2024 (1), 1476770 , 2024
2024
Citations: 30
From sunlight to power: Enhancing 4E performance with two-stage segmented thermoelectric generators in concentrated solar applications
H Alghamdi, C Maduabuchi, K Okoli, A Albaker, M Alanazi, M Alghassab, ...
Journal of Cleaner Production 429, 139314 , 2023
2023
Citations: 24
Perovskite Materials with Improved Stability and Environmental Friendliness for Photovoltaics
S Kumar, SS Sharma, DJ Giri, E Makki, T Sathish, H Panchal
Frontiers in Mechanical Engineering 10, 1357087 , 2024
2024
Citations: 23
Enhancing the fire-resistant performance of concrete-filled steel tube columns with steel fiber-reinforced concrete
C George, SS Selvan, VS Kumar, G Murali, J Giri, E Makki, T Sathish
Case Studies in Construction Materials 20, e02741 , 2024
2024
Citations: 22
Utilization of response surface methodology to optimize the mechanical behaviour of flax/nano TiO 2 /Epoxy based hybrid composites under liquid nitrogen …
SF Mohammed Ajmal, L Natrayan, J Giri, E Makki, MA Shah, S Mallik
Frontiers in Materials 11, 1344351 , 2024
2024
Citations: 21
Impact of nano-hybridization on flexural and impact behavior of basalt/glass fiber-epoxy composites for automotive structures
V Boobalan, T Sathish, J Giri, E Makki
AIP Advances 14 (4) , 2024
2024
Citations: 20

Emad Makki, Ph.D.

EDUCATION

RESEARCH, TEACHING, or OTHER INTERESTS

Scopus Publications

RECENT SCHOLAR PUBLICATIONS

MOST CITED SCHOLAR PUBLICATIONS