Dattaji K Shinde

Dr. Dattaji K. Shinde has obtained B. E. (Mechanical) from Government College of Engineering Aurangabad Maharashtra (2000), M. Tech. (Design Engineering) from Indian Institute of Technology, Delhi (Jan 2002). He has obtained Ph D in Nanoengineering at Joint School of Nanoscience and Nanoengineering, North Carolina A & T State University Greensboro NC, USA in December 2014. Also, he was Postdoctoral Scholar at North Carolina A and T State University USA during 1st January to 31st June 2015. He has worked as Graduate Research Assistant in Nanoengineering department (Aug. 2011- Dec. 2014).
Portfolios and affiliations:
Currently, he is Associate Professor of Production Engineering Department and Former Head of Production Engineering Department, VJTI Mumbai. The additional portfolios handling at VJTI Mumbai are MHRD’s Institutions Innovation Council President, Start-up and E-Cell Coordinator, Swach Bharat Abhiyan Internship Coordinator, AISHE Convener, ARIIA Nodal officer, SAMPE Interna

EDUCATION

Postdoc JSNN, North Carolina A and T State
University USA 1st Jan 2015 to 30
June 2015

Ph.D.
Nanoengineering North Carolina A and T State
University USA December 2014 4.0/4.0

M S Design Engineering Indian Institute of Technology IIT Delhi India January 2002

B S Mechanical Engineering Dr. Babasaheb Ambedkar Marathwada University Aurangabad, Maharashtra State, India June 2000

RESEARCH, TEACHING, or OTHER INTERESTS

Mechanical Engineering, Mechanics of Materials, Ceramics and Composites, Industrial and Manufacturing Engineering

RECENT SCHOLAR PUBLICATIONS

Optimization of wet chemical etching for MRR and undercut by substrate orientation
R Chanmanwar, V Mohale, D Shinde, D Raut
Materials and Manufacturing Processes, 1-12 , 2026
2026
Experimental Investigation of MWCNT Nanocomposite and Effect of Infill Ratio Variation on Flexural Strength
SC Kulkarni, SA Uthale, N Shahapure, D Shinde, MD Nadar
Advances in Thermal System, Materials and Design Engineering, 211-215 , 2026
2026
ENHANCING INTERLAMINAR SHEAR STRENGTH (ILSS) OF WOVEN FABRIC HYBRID POLYMERIC NANOCOMPOSITES BY INCORPORATING MULTI WALLED CARBON NANOTUBES.
SA Uthale, S Mane, D Shinde
Suranaree Journal of Science & Technology 33 (1), 030365-1 , 2026
2026
Design and Development of Smart Industrial Chemical Etching Setup for PCB Manufacturing
RM Chanmanwar, V Mohale, DK Shinde, DN Raut
2024 IEEE Conference on Engineering Informatics (ICEI), Melbourne, Australia … , 2025
2025
Citations: 1
Critical Analysis of Chemical Machining Setup Design using FMECA
DR Rahul Chanmanwar,Vijay Mohale, Dattaji Shinde
Journal of Sustainable Development Innovations 3 (1), 25-33 , 2025
2025
Effect of MWCNTS on mechanical properties of woven fabric hybrid polymeric nanocomposites and finite element analysis of nanocomposite
S Uthale, D Shinde, N Shahapure, S Kulkarni, M Nikam
International Journal on Interactive Design and Manufacturing (IJIDeM) 18 … , 2024
2024
Citations: 2
Evaluation of Fracture Durability and Wear Resistance Properties for Orthopaedic Implant Applications
APPDNR S.G. Solanke, V.R. Gaval, D.K. Shinde, U.D. Nimbalkar
ASM Science Journal 19, 1-9 , 2024
2024
Design and Testing of a DC-PTC Heater Coil System for Efficient Heating of Liquid Solutions: Application to Electrical PCB Industry Etching
R Chanmanwar, V Mohale, DK Shinde, DN Raut, A Shaikh
International Conference on Mechanical Engineering: Researches and … , 2024
2024
Mechanical Behaviour, Characterization and Finite Element Analysis of Neat Epoxy and Epoxy Composites Containing Multi- Walled Carbon Nanotubes
SKND Suhas Uthale, Dattaji Shinde, Nilesh Shahapure
SAMPE Conference Proceedings. Seattle, WA, April 17-20, 2023. Society for … , 2023
2023
Mechanical Behaviour, Characterization and Finite Element Analysis of Neat Epoxy and Epoxy Composites Containing Multi-Walled Carbon Nanotubes
S Uthale, D Shinde, N Shahapure, S Kulkarni, N Dhamal
2023
Atomistic modeling and molecular dynamic simulation of polymer nanocomposites for thermal and mechanical property characterization: A review
N Shahapure, D Shinde, A Kelkar
AIMS Materials Science 10 (2), 249-287 , 2023
2023
Citations: 13
Nalini Bai Thakkar Award
N Prabhudesai, S Pathuthara, O Shetty, V Mayekar, S Chavan, ...
Journal of Cytology 39 (Suppl 1), S1-S6 , 2022
2022
Development and Characterization of Electrode Using PAN/TiO 2 Nanofibers to Improve the Battery Capacity
DM Sontakke, DK Shinde
Recent Evolutions in Energy, Drives and E-Vehicles, 85-101 , 2022
2022
Vehicle Allotment and Route Optimization for Transportation Services Using Logistics Techniques in Supply Chain Management
R Agarwal, D Shinde
2nd Indian International Conference on Industrial Engineering and Operations … , 2022
2022
Design Simulation of Cam Dynamic Test Rig to Facilitate the Study of Modified Four-Dwell Profile Using Minimum Rubbing Velocity
DKS Atul V. Karanjkar
Journal of Xi'an University of Architecture & Technology 14 (3), 106-118 , 2022
2022
Development of scheduling optimization tool using Excel VBA and Solver for productivity improvement of slitting machines for PVC
S Chavan, DK Shinde
PVDC Film , 2022
2022
Citations: 2
Experimental Study for Flexural Rigidity and Cost Optimization of the Woven Fabric Glass/Carbon/Basalt and Hybrid Epoxy Composites
NA Suhas A. Dattaji K. Shinde
Journal of Xi'an University of Architecture & Technology 13 (7), 683-695 , 2021
2021
Citations: 3
Polymeric hybrid nanocomposites processing and finite element modeling: An overview
ADK Suhas A. Uthale, Nitin Dhamal, Dattaji K. Shinde
Science Progress Sage Journal https://doi.org/10.1177/00368504211029471 104 … , 2021
2021
Citations: 30
Synthesis and Characterization of PAN/TiO2 Based Carbon Nanofibers for Energy Application
A Divyanka Sontakke, Amit D. Kamble, Dattaji K Shinde, Nadir
Journal of Xi'an University of Architecture & Technology 13 (7), 213-225 , 2021
2021
Comparison of Mechnanical Properties of Hybrid Woven Fabric Reinforced Epoxy Composites Fabricated Using of Glass Carbonand Basalt Fibers
S Uthale, NDDK Shinde
SAMPE neXus 2021 , 2021
2021
Citations: 1

MOST CITED SCHOLAR PUBLICATIONS

A review paper on 3D-printing aspects and various processes used in the 3D-printing
VG Gokhare, DN Raut, DK Shinde
Int. J. Eng. Res. Technol 6 (06), 953-958 , 2017
2017
Citations: 303
Effect of TEOS electrospun nanofiber modified resin on interlaminar shear strength of glass fiber/epoxy composite
DK Shinde, AD Kelkar
World Acad. Sci. Eng. Technol. Int. J. Mater. Metall. Eng 8, 54-60 , 2014
2014
Citations: 33
Polymeric hybrid nanocomposites processing and finite element modeling: An overview
ADK Suhas A. Uthale, Nitin Dhamal, Dattaji K. Shinde
Science Progress Sage Journal https://doi.org/10.1177/00368504211029471 104 … , 2021
2021
Citations: 30
Study and implementation of ‘5S’methodology in the furniture industry warehouse for productivity improvement
S Wani, D Shinde
International Journal of Engineering Research & Technology 10 (08), 184-191 , 2021
2021
Citations: 27
Mechanical properties of woven fiberglass Composite interleaved with glass nanofibers
D Shinde, E Kimbro, R Mohan, A Kelkar
ICCM19 2 (166.8), 6767-6778 , 2013
2013
Citations: 20
Comparison of mechanical properties of EPON 862/W with and without TEOS electrospun nanofibers in nanocomposite
DK Shinde, L Emmanwori, AD Kelkar
SAMPE 2014, Seattle WA USA, June 2, 2014, 1-11 , 2014
2014
Citations: 14
Atomistic modeling and molecular dynamic simulation of polymer nanocomposites for thermal and mechanical property characterization: A review
N Shahapure, D Shinde, A Kelkar
AIMS Materials Science 10 (2), 249-287 , 2023
2023
Citations: 13
Flexural behavior of fiberglass polymer composite with and without TEOS electrospun nanofibers
DK Shinde, FT White, AD Kelkar
ASME international mechanical engineering congress and exposition 46637 … , 2014
2014
Citations: 13
Effect of FIFO strategy implementation on warehouse inventory management in the furniture manufacturing industry
S Ramdasi, D Shinde
International Journal of Engineering and Technical Research 10, 179-183 , 2021
2021
Citations: 12
Implementing Lean Manufacturing Technique in Fabrication Process Planning–A Case Study
SK Ranjan, DK Shinde
International Research Journal of Engineering and Technology 5 (7), 2600-2606 , 2018
2018
Citations: 11
Electro-fusion joint failure polyethylene pipes analysis and its simulation using finite element analysis
DKS Sarambale, D. S.
International Journal of Mechanical and Production Engineering 5 (11), 51-55 , 2017
2017
Citations: 11
Effect of electrospun nanofibers on the short beam strength of laminated fiberglass composite
DK Shinde
North Carolina Agricultural and Technical State University , 2014
2014
Citations: 8
Mechanical and Electrical Properties of Carbon Nanotubes Based Acrylonitrile Butadiene Styrene Nanocomposite Fabricated Using Fused Deposition Method
SC Kulkarni, JSDK Shinde
SAMPE 2019 , 2019
2019
Citations: 7
Short Beam Strength of Laminated Fiberglass Composite with and Without Electospun TEOS Nanofibers
DK Shinde, AD Kelkar
SAMPE 2016 - Long Beach CA USA, May 23-26 / 2016, 1-15 , 2016
2016
Citations: 7
Mechanical properties assessment of electrospun TEOS nanofibers with epon 862/w resin system in a fiber glass composite
L Emmanwori, DK Shinde, AD Kelkar
45th ISTC - Wichita KS - Oct 21-24 / 2013, 1-7 , 2013
2013
Citations: 7
Comparison of male and female vowel formants by native speakers of Marathi language
DK Shinde, YN More, AS Sonawane, VS Pawade, KV Kulkarni
International Journal of Engineering Research and General Science 5 (1), 173-178 , 2017
2017
Citations: 6
A Review on use of Mistake Proof (Poka Yoke) Locating Fixture on Ultra SD Cartridge Assembly Line
DDKS Vicky Pravin Poladia
International Journal of Advanced Engineering Research and Science 4 (1 … , 2017
2017
Citations: 6
Development of Cold Supply Chain for a Controlled Atmosphere Cold Store for Storage of Apple
DKS Ruturaj Bhaskare
International Journal of Engineering Science and Computing 7 (7), 14207-14210 , 2017
2017
Citations: 5
3D Printing of Patternless Sand Molds
KPK R V Kharampure, R. P. Hingolikar, Arun Sharma, D K Shinde, B E Narkhede
Proceeding International Conference on Manufacturing Excellence (ICMAX-2017 … , 2017
2017
Citations: 5
Causes of Delay and Cost Overruns in A Domestic and Commercial Natural Gas supplying Company and Its Analysis Using Research Methodology
DKS Trishala Zende
International Journal of Scientific and Research Publications 7 (6), 173-177 , 2017
2017
Citations: 4