Amjed alwan ALBORDHI

@amjed.albordi@tabrizu.ac.ir

Department of Electromechanical Systems Engineering, Al-Technical College of Thi-Qar, Southern Technical University.
university of tabriz

Amjed alwan ALBORDHI


                  Download Compact PDF  
https://researchid.co/amjed.albordi
Electrical Engineer of Nasiriya Thermal Power Station, Ministry of Electricity, IRAQ
currently PhD student of the Department of Electrical Engineering, Faculty of Electrical and Computer Engineering ,University of Tabriz, Iran .Bachelor’s degree in Electrical Engineering from the University of Technology in 2000.Master’s degree in Renewable Energy from University of Technology-Baghdad Electromechanical Engineering Department in 2018 .His current research interests include power electronics and its applications such as in wind turbines, PV systems, reliability, harmonics and adjustable speed drives. He can be contacted at Email: aamjed387@

EDUCATION

Electrical Engineer of Nasiriya Thermal Power Station, Ministry of Electricity, IRAQ
currently PhD student of the Department of Electrical Engineering, Faculty of Electrical and Computer Engineering ,University of Tabriz, Iran .Bachelor’s degree in Electrical Engineering from the University of Technology in 2000.Master’s degree in Renewable Energy from University of Technology-Baghdad Electromechanical Engineering Department in 2018 .His current research interests include power electronics and its applications such as in wind turbines, PV systems, reliability, harmonics and adjustable speed drives. He can be contacted at Email: aamjed387@

RESEARCH, TEACHING, or OTHER INTERESTS

Electrical and Electronic Engineering, Energy Engineering and Power Technology, Renewable Energy, Sustainability and the Environment, General Energy
6

Scopus Publications

28

Scholar Citations

3

Scholar h-index

1

Scholar i10-index

Scopus Publications

  • Mobile energy sources
    Vahid Sohrabi Tabar, Arian Feyz Rahnemoon, Amjed Alwan Kadhim, Nisreen Khalil Abed, Haider Muaelou Shaillan
    Handbook of Power Electronics in Smart Grids and Intelligent Energy, 2026
  • Performance study of low-speed wind energy harvesting by micro wind turbine system
    Moamel Alwan Kadhim, Chen Chai Phing, Lim Chin Wai, Johnny Koh Siaw Paw, Yaw Chong Tak, K. Kadirgama, Amjed Alwan Kadhim
    Energy Reports, 2025
    Wind energy constitutes a fundamental clean and sustainable energy asset, serving an essential function in the worldwide shift towards a low-carbon energy framework. Notwithstanding the technological innovations that have improved the accessibility and operational efficiency of wind power, the intrinsic variability of wind velocity and flow patterns continues to present considerable obstacles to the advancement of wind turbines that can rival conventional energy sources in terms of operational performance and reliability. To address these obstacles, the current research endeavor is dedicated to the augmentation of energy extraction from low-velocity wind environments through the implementation of micro-scale wind turbine systems. By utilizing maximum power point tracking (MPPT) algorithms, this study investigates the operational strategies of wind turbines subjected to variable wind conditions, with a particular focus on optimizing energy capture during low to moderate wind speeds. In addition, the research delineates targeted design recommendations aimed at improving the efficacy of small-scale wind turbines in low-velocity circumstances. A hybrid economic-environmental strategy is underscored as a viable approach to mitigate the unpredictability associated with wind energy, thereby integrating renewable energy systems with energy storage mechanisms. This research endeavor aims to facilitate the advancement of efficient, environmentally sustainable, and economically viable wind energy technologies that are meticulously tailored for small-scale implementations
  • Cogging Force Reduction in PMLSMs Using Segmented Magnets
    Journal of Operation and Automation in Power Engineering, 2025
  • Comparative Analysis of Three-Blade and Six-Blade Micro Wind Turbines in Low Wind Speed Regions: A Case Study in Malaysia
    Moamel Alwan Hadkim, Inam Razzaq Abd Almohsen, Chen Chai Phing, Lim Chin Wai, Johnny Koh Siaw Paw, Yaw Chong Tak, K. Kadirgama, Amjed Alwan Kadhim
    Iop Conference Series Earth and Environmental Science, 2025
    Around the world, wind turbines are essential to the production of power. However, running micro-scale wind generators comes with several difficulties. This affordable, clean, and renewable energy is something that many countries aim to achieve. Malaysia’s low wind speeds, which generally make it more challenging to deploy wind turbines nationwide and provide significant obstacles to efficiently harvesting wind energy, impact this goal. This study investigates the use of miniature wind turbines to overcome this problem. Using an electric blower, two different turbine designs, the S-200 W and S-800 W models, were tested extensively in a controlled laboratory setting. The trials reached a maximum wind speed of 6 m/s despite the challenges of controlling low wind speeds. The analysis found significant variations between the S-200 W and S-800 W turbines, especially in power output and coefficient. To maximize turbine performance under low wind circumstances, a particular MPPT technology was created that draws additional power from a battery as needed. While the S-800 W turbine demonstrated a lower power coefficient of 52%, the S-200 W turbine exceeded a 75% power coefficient, beyond its operating limit and necessitating the intervention of the MPPT system to control energy. To guarantee the next experiment’s accuracy and dependability, the study supports the use of wind tunnels because they can create controlled high-speed wind conditions, improving the validity of experimental results and making it easier to make well-informed decisions about wind turbine technology.
  • Coordination of hybrid vehicles strategies to improve fuel consumption and reduce the economic cost
    Basima Taresh Dawood, Yasser Ahmad, Amjed Alwan Kadhim
    International Journal of Power Electronics and Drive Systems, 2024
    To reduce fuel consumption and environmental pollution, this study focused on coordinating the use of a hybrid vehicle, that is, a bus type, powered by a diesel and electric engine. Solar cells have been added to the roof of the bus lighting, heating, and cooling, and fuzzy logic is applied to control the battery charge. Adding solar energy charge the battery by 25% of the total battery charge, thereby reducing fuel costs. The time was also calculated with the battery charge, and the battery is charge more. The aim of the research is to reduce environmental pollution and to use artificial intelligence to control the hybrid vehicle battery charge and speed.
  • Heat Transfer Enhancement in Air Duct Flow by Micro-Channel Experimental and Numerical Investigation
    Jalal M. Jalil, Ghada A. Aziz, Amjed A. Kadhim
    Iop Conference Series Materials Science and Engineering, 2020
    The heating of air flow through micro-channel was studied experimentally and numerically to examine the improvement in the thermal performance achieved by micro-channel. Numerically, laminar incompressible 3D steady-state Navier Stokes equations were solved by Finite volume method. Experimentally, a rig was built to investigate the cooling of air flow through micro-channel for different velocities and electric powers heater. The micro-channels block (length = 0.1, width = 0.05, height = 0.005 m) was manufactured from copper metal with 10 rectangular micro-channels (length = 0.1, width = 0.001, height = 0.0005 m). The performance of the microchannel was evaluated through exit air temperature value. The studied parameters numerically and experimentally were air velocities inside micro-channels (1 to 20 m/s) and heater powers (1 to 5 W). The comparison between numerical and experimental results was acceptable and reached 3% as maximum. Also the results were compared with other investigator results. High heat transfer coefficients values were achieved by micro-channel, reaches maximum value of 150 W/m2K at velocity air 20 m/s and heater power 5 W.

RECENT SCHOLAR PUBLICATIONS

  • Mobile energy sources
    NKAHMS Vahid Sohrabi Tabar 1 , Arian Feyz Rahnemoon 2 , Amjed Alwan Kadhim 3
    Handbook of Power Electronics in Smart Grids and Intelligent Energy 10, 305-327 , 2026
    2026.0
  • Comparative Analysis of Three-Blade and Six-Blade Micro Wind Turbines in Low Wind Speed Regions: A Case Study in Malaysia
    MA Hadkim, IR Abd Almohsen, CC Phing, LC Wai, JKS Paw, YC Tak, ...
    IOP Conference Series: Earth and Environmental Science 1560 (1), 012047 , 2025
    2025.0
  • Analytical Approach to Predict the Magnetic Field of Slotted Permanent Magnet Linear Machines in Open-Circuit mode
    N Rostami, A Alwan Albordhi, MB Bannae Sharifian
    International journal of electrical and computer engineering systems 16 (9 … , 2025
    2025.0
  • Cogging Force Reduction in PMLSMs Using Segmented Magnets
    N Rostami, AA Kadhim, MB Bannae-Sharifian
    Journal of Operation and Automation in Power Engineering, 206-211 , 2025
    2025.0
    Citations: 3
  • Performance study of low-speed wind energy harvesting by micro wind turbine system
    AAK Moamel Alwan Kadhim a d e , Chen Chai Phing b d e , Lim Chin Wai b d e ...
    Energy Reports , , 13 (https://doi.org/10.1016/j.egyr.2025.02.0), Pages 3712 … , 2025
    2025.0
    Citations: 18
  • Thermal performance study using parabolic collector and cavity receiver using nano-storage materials for solar drying of apples in Baghdad, Iraq
    APDYA Mahmood, amjed alwan
    Metallurgical and Materials Engineering 31 (5 (2025)), 493-515 , 2025
    2025.0
  • Thermal performance study using parabolic collector and cavity receiver using nano-storage materials for solar drying of apples in Baghdad, Iraq
    APDYA Mahmood, AA Kadhim
    Metallurgical and Materials Engineering 31 (5 (2025)), p. 492-515 , 2025
    2025.0
  • Comparative Analysis of Three-Blade and Six-Blade Micro Wind Turbines in Low Wind Speed Regions: A Case Study in Malaysia
    5 MOAMEL ALWAN HADKIM1*, INAM RAZZAQ ABD ALMOHSEN 2, CHEN CHAI PHING 3, LIM ...
    IOP Publishing 1560 (DOI 10.1088/1755-1315/1560/1/012047), 651-657 , 2025
    2025.0
  • Development and Design of Magnetic Structures for Improving Reliability Linear Motors
    N Rostami, MBB Sharifian
    Metallurgical and Materials Engineering 30 (4), 391-403 , 2024
    2024.0
  • Coordination of hybrid vehicles strategies to improve fuel consumption and reduce the economic cost
    AAK Basima Taresh Dawood, Yasser Ahmad
    International Journal of Power Electronics and Drive Systems (IJPEDS) 15 … , 2024
    2024.0
    Citations: 2
  • Improving the Performance of Transformer Oil Using silica nan fluid
    RJT AMJED ALWAN KADHIM
    The 11th national congress of new technologies in the field of sustainable … , 2022
    2022.0
  • Improving the Performance of Transformer with Oil Silica Nan Fluid
    AA Kadhim, RJ Tuma, BT Dawood
    2022.0
  • Heat transfer enhancement in air duct flow by micro-channel experimental and numerical investigation
    JM Jalil, GA Aziz, AA Kadhim
    IOP Conference Series: Materials Science and Engineering 765 (1), 012027 , 2020
    2020.0
    Citations: 3
  • Experimental and numerical study to enhance of heat transfer coefficient in air flow using microchannel
    JM Jalil, GA Aziz, AA Kadhim
    Journal of University of Babylon for Engineering Sciences 26 (7), 112-123 , 2018
    2018.0
    Citations: 2
  • Improving the Performance of Transformer Oil Using silica nan fluid
    RJ TUMA

MOST CITED SCHOLAR PUBLICATIONS

  • Performance study of low-speed wind energy harvesting by micro wind turbine system
    AAK Moamel Alwan Kadhim a d e , Chen Chai Phing b d e , Lim Chin Wai b d e ...
    Energy Reports , , 13 (https://doi.org/10.1016/j.egyr.2025.02.0), Pages 3712 … , 2025
    2025.0
    Citations: 18
  • Cogging Force Reduction in PMLSMs Using Segmented Magnets
    N Rostami, AA Kadhim, MB Bannae-Sharifian
    Journal of Operation and Automation in Power Engineering, 206-211 , 2025
    2025.0
    Citations: 3
  • Heat transfer enhancement in air duct flow by micro-channel experimental and numerical investigation
    JM Jalil, GA Aziz, AA Kadhim
    IOP Conference Series: Materials Science and Engineering 765 (1), 012027 , 2020
    2020.0
    Citations: 3
  • Coordination of hybrid vehicles strategies to improve fuel consumption and reduce the economic cost
    AAK Basima Taresh Dawood, Yasser Ahmad
    International Journal of Power Electronics and Drive Systems (IJPEDS) 15 … , 2024
    2024.0
    Citations: 2
  • Experimental and numerical study to enhance of heat transfer coefficient in air flow using microchannel
    JM Jalil, GA Aziz, AA Kadhim
    Journal of University of Babylon for Engineering Sciences 26 (7), 112-123 , 2018
    2018.0
    Citations: 2
  • Mobile energy sources
    NKAHMS Vahid Sohrabi Tabar 1 , Arian Feyz Rahnemoon 2 , Amjed Alwan Kadhim 3
    Handbook of Power Electronics in Smart Grids and Intelligent Energy 10, 305-327 , 2026
    2026.0
  • Comparative Analysis of Three-Blade and Six-Blade Micro Wind Turbines in Low Wind Speed Regions: A Case Study in Malaysia
    MA Hadkim, IR Abd Almohsen, CC Phing, LC Wai, JKS Paw, YC Tak, ...
    IOP Conference Series: Earth and Environmental Science 1560 (1), 012047 , 2025
    2025.0
  • Analytical Approach to Predict the Magnetic Field of Slotted Permanent Magnet Linear Machines in Open-Circuit mode
    N Rostami, A Alwan Albordhi, MB Bannae Sharifian
    International journal of electrical and computer engineering systems 16 (9 … , 2025
    2025.0
  • Thermal performance study using parabolic collector and cavity receiver using nano-storage materials for solar drying of apples in Baghdad, Iraq
    APDYA Mahmood, amjed alwan
    Metallurgical and Materials Engineering 31 (5 (2025)), 493-515 , 2025
    2025.0
  • Thermal performance study using parabolic collector and cavity receiver using nano-storage materials for solar drying of apples in Baghdad, Iraq
    APDYA Mahmood, AA Kadhim
    Metallurgical and Materials Engineering 31 (5 (2025)), p. 492-515 , 2025
    2025.0
  • Comparative Analysis of Three-Blade and Six-Blade Micro Wind Turbines in Low Wind Speed Regions: A Case Study in Malaysia
    5 MOAMEL ALWAN HADKIM1*, INAM RAZZAQ ABD ALMOHSEN 2, CHEN CHAI PHING 3, LIM ...
    IOP Publishing 1560 (DOI 10.1088/1755-1315/1560/1/012047), 651-657 , 2025
    2025.0
  • Development and Design of Magnetic Structures for Improving Reliability Linear Motors
    N Rostami, MBB Sharifian
    Metallurgical and Materials Engineering 30 (4), 391-403 , 2024
    2024.0
  • Improving the Performance of Transformer Oil Using silica nan fluid
    RJT AMJED ALWAN KADHIM
    The 11th national congress of new technologies in the field of sustainable … , 2022
    2022.0
  • Improving the Performance of Transformer with Oil Silica Nan Fluid
    AA Kadhim, RJ Tuma, BT Dawood
    2022.0
  • Improving the Performance of Transformer Oil Using silica nan fluid
    RJ TUMA

STARTUP

Amjed Alwan Kadhim received his B.Sc. and M.Sc. degrees in the field of Electrical Engineering from the University of Technology-Baghdad Iraq, in 2000 and 2018, respectively. a Ph.D. degree at the University of Tabriz, Iran in 2025. His special field of interest is the design of electric machines and power electronics and applications. He can be contacted at email: aamjed387@ or .