Yusup Amin

Scopus Publications

THE SURFACE CHARACTERISTICS AND PHYSICAL PROPERTIES OF SENGON WOOD AT HIGH-TEMPERATURE HEATING TREATMENTS
Tushliha Ayyuni Fariha, Sari D Marbun, Sudarmanto, Narto, Adik Bahanawan, Prabu S Sejati, Teguh Darmawan, Dimas Triwibowo, Danang S Adi, Yusup Amin, Sarah Augustina, Wahyu Dwianto, Rita K Sari, Irsan Alipraja, Imam Wahyudi, EM. Latif R Kusuma
Indonesian Journal of Forestry Research, 2025
Sengon (Falcataria moluccana Miq.) is a fast-growing timber species widely distributed in Indonesia. However, its dimensional instability and low surface quality have limited its widespread use. Wood modification is essential for enhancing these properties, and one effective approach is heat treatment. This study investigated the effects of different heat treatment methods and durations on color change, surface roughness, weight loss (WL), decreased density, and dimensional stability of sengon wood. The heat modification process was conducted using two methods: oven-heating and hot press-heating, with temperatures set at 200°C for durations ranging from 1 to 5 hours. The results indicated that oven-heated samples exhibited higher surface roughness, weight loss, density reduction, and dimensional stability while showing less color change than hot press-heated samples. Additionally, the hot press-heated samples displayed more significant color changes (darkening) and smoother surface roughness. WL and decreased density were also more pronounced with longer heating durations, except for the 4- and 5-hour hot press-heating treatments. Notably, oven-heated samples demonstrated higher dimensional stability than hot press-heated samples as the duration of heating increased. Based on the results, the optimal treatment varies depending on the desired product characteristics. For improved surface qualities with consideration of WL, the optimum treatment is a 2-hour hot press-heating treatment. Higher dimensional stability can be achieved through a 3-hour oven-heating treatment.
Comparison Physical, Mechanical and Acoustical Properties of Jabon and Betung Bamboo
Yusup Amin, Renaldi Purnomo Adji, Wahyu Dwianto, Naresworo Nugroho, Effendi Tri Bahtiar, Lina Karlinasari
Aip Conference Proceedings, 2025
Evaluation on Wood Properties of 6 Years-old Platinum Teak through Near Infrared Spectroscopy
Adik Bahanawan, N. Narto, S. Sudarmanto, Dimas Triwibowo, Teguh Darmawan, Prabu S. Sejati, Yusup Amin, Imran A. Sofianto, Wahyu Dwianto, Setiawan Khoirul Himmi, Danang Sudarwoko Adi, Tomoya Imai
Aip Conference Proceedings, 2025
In-situ modification of wood polymer via impregnation with ultra-low molar ratio urea-formaldehyde resins
Sarah Augustina, Wahyu Dwianto, Narto, Adik Bahanawan, Prabu S. Sejati, Yusup Amin, Teguh Darmawan, Imam Wahyudi, Lina Karlinasari, Ika Juliana, Hiroshi Isoda, Philippe Gérardin, Muhammad Adly Rahandi Lubis
European Journal of Wood and Wood Products, 2025
MODIFICATION OF MELAMINE FORMALDEHYDE-BASED ADHESIVES FOR THE MANUFACTURING OF CROSS-LAMINATED TIMBER (CLT) FROM JABON WOOD
Yusup Amin, Muhammad A. R. Lubis, Naresworo Nugroho, Lina Karlinasari
Proceedings from the 14th World Conference on Timber Engineering Advancing Timber for the Future Built Environment Wcte 2025, 2025
Characteristics and Potential Utilization of Yopo Wood (Piptadenia peregrina Benth.)
Yusup Amin, Danang S. Adi, Teguh Darmawan, Dimas Triwibowo, Wahyu Dwianto, Ratih Damayanti
Lecture Notes in Civil Engineering, 2025
Hot Pressing Treatment on Physical and Mechanical Properties of Com-Ply Bonded with Citric Acid
Dimas Triwibowo, Narto, Sudarmanto, Fazhar Akbar, Yusup Amin, Sukma Surya Kusumah, Yusuf Sudo Hadi
Lecture Notes in Civil Engineering, 2025
Changes in the Characteristics of LIPI Fast-Grown Teak Wood at Different Ages and Growing Sites
Wahyu Dwianto, Danang S. Adi, Dwi A. Pramasari, Eka Lestari, Adik Bahanawan, Teguh Darmawan, Dimas Triwibowo, Yusup Amin, Prabu S. Sejati, Imran A. Sofianto, Sudarmanto, Mohamad Gopar, Fazhar Akbar, Betalini W. Hapsari, Witjaksono, Ratih Damayanti, Ganis Lukmandaru, Akihisa Kitamori, Takuro Mori, Junji Sugiyama
Lecture Notes in Civil Engineering, 2025
IDENTIFICATION OF LIGNOCELLULOSE-LIKE MATERIAL USING SPECTROSCOPY ANALYSIS
Danang Sudarwoko Adi, Widya Fatriasari, Narto, Dimas Triwibowo, Teguh Darmawan, Yusup Amin, Imran Arra'd Sofianto, Rohmah Pari, Dyah Ayu Agustiningrum, Raden Gunawan Hadi Rahmanto, Listya Mustika Dewi, Khoirul Himmi Setiawan, Djarwanto, Ratih Damayanti, Wahyu Dwianto
Indonesian Journal of Forestry Research, 2024
Lignocellulose materials, such as bamboo, rattan, and wood, have been largely used for furniture and crafts. On the other hand, the utilization of lignocellulose-like materials, which have a similar texture and appearance to those from nature, has been increasing recently due to their superior durability. This research aimed to identify the lignocellulose-like material using spectroscopy analysis, such as Raman and Near Infrared (NIR) which is well-known as a non-destructive, quick, and accurate approach for material identification. We investigated 4 types of lignocellulose-like materials that were provided by Dewan Serat Indonesia (The Indonesian Fiber Council) from an industry that produces them. The NIR analysis was performed at wavenumbers 10,000-4,000 cm-1. The natural lignocellulose (bamboo and wood) and the polymers (polyethylene and polyproline) were used as standards. Raman analysis was further employed to identify the composition of selected lignocellulose-like materials by comparing their spectra with the library software. The results showed that the original NIR spectra of lignocellulose-like and those natural materials were different, indicating that the NIR analysis can differentiate those materials. The NIR spectra of lignocellulose-like materials were similar to those of polyethylene spectra. Those lignocellulose-like were also identified as polyethylene due to the similarity of the Raman spectra and their library spectra.
Surface Roughness, Dynamic Wettability, and Interphase of Modified Melamine Formaldehyde-Based Adhesives on Jabon Wood
Yusup Amin, Naresworo Nugroho, Effendi Tri Bahtiar, Wahyu Dwianto, Muhammad Adly Rahandi Lubis, Ulfa Adzkia, Lina Karlinasari
Polymers, 2024
The surface roughness and wettability of wood are critical aspects to consider when producing laminated wood products with adhesive applications. This study aims to investigate the surface roughness and dynamic wettability of Jabon wood in the presence of melamine formaldehyde (MF)-based adhesives. Commercial MF adhesives (MF-0) and modified MF adhesives (MF-1) were applied to Jabon wood, which includes tangential (T), radial (R), and semi-radial (T/R) surfaces. The surface roughness of Jabon wood was assessed using a portable stylus-type profilometer. The low-bond axisymmetric drop shape analysis (LB-ADSA) method was employed to identify the contact angle (θ) of the MF-based adhesives on Jabon wood. The wettability was determined by evaluating the constant contact angle change rate (K value) using the Shi and Gardner (S/G) model. Dynamic mechanical analysis (DMA) was employed to investigate the viscoelastic characteristics of the interphase analysis of the wood and MF-based adhesives. The roughness level (Ra) of the Jabon board ranged from 5.62 to 6.94 µm, with the T/R having a higher level of roughness than the R and T. MF-0 exhibited a higher K value (0.262–0.331) than MF-1 (0.136–0.212), indicating that MF-0 wets the surface of Jabon wood more easily than MF-1. The wood–MF-0 interphase reached a maximum stiffness of 957 N/m at 123.0 °C, while the wood–MF-1 had a maximum stiffness of 2734 N/m at 110.5 °C. In addition, the wood–MF-0 had a maximum storage modulus of 12,650 MPa at a temperature of 128.9 °C, while the wood–MF-1 had a maximum storage modulus of 22,950 MPa at 113.5 °C.
Physical and anatomical properties of nine years-old platinum teak wood
Teguh Darmawan, Narto, Sudarmanto, Dimas Triwibowo, Yusup Amin, Adik Bahanawan, Danang Sudarwoko Adi, Imran Arra’d Sofianto, Prabu Satria Sejati, Wahyu Dwianto, Imam Wahyudi
Aip Conference Proceedings, 2024
Deformation pattern of compressed wood cell walls in radial direction and its effect on modulus of rupture values in different loading directions
Wahyu Dwianto, Teguh Darmawan, Sudarmanto, Narto, Danang Sudarwoko Adi, Adik Bahanawan, Yusup Amin, Dimas Triwibowo, Prabu Satria Sejati, Imran Arra’d Sofianto, Sarah Augustina, Sari Delviana Marbun
Aip Conference Proceedings, 2024
Application of near-infrared (NIR) spectroscopy for predicting changes of water content and rind colour of red delicious Washington apple (Malus domestica) in room temperature storage
Dyah Ayu Agustiningrum, Imran Arra’d Sofianto, Ratih Damayanti, Djarwanto, R. G. Hadi Rahmanto, Rohmah Pari, Listya Mustika Dewi, Adik Bahanawan, Dimas Triwibowo, Teguh Darmawan, Danang Sudarwoko Adi, Yusup Amin, Wahyu Dwianto, Sudarmanto, Narto, Prabu Satria Sejati
Aip Conference Proceedings, 2024
Application of near-infrared spectroscopy for predicting the wood density of teakwood stands by increment cores and thin wood surface sampling
Imran Arra’d Sofianto, Wahyu Dwianto, Sudarmanto, Narto, Danang Sudarwoko Adi, Dimas Triwibowo, Teguh Darmawan, Yusup Amin, Adik Bahanawan, Prabu Satria Sejati, Ratih Damayanti, Djarwanto, Raden Gunawan Hadi Rahmanto, Dyah Ayu Agustiningrum, Rohmah Pari, Listya Mustika Dewi, Sukma Surya Kusumah, Sarah Augustina, Sari Delviana Marbun
International Wood Products Journal, 2024
A novel transparent hydrogel made of nanocellulose derived from oil palm residue: evaluation of its water retention and biodegradation properties
Novitri Hastuti, Luciasih Agustini, Yusup Amin, Dian Anggraini Indrawan, Lisna Efiyanti
Bulletin of Materials Science, 2023
Effect of Glue Spread on Bonding Strength, Delamination, and Wood Failure of Jabon Wood-Based Cross-Laminated Timber Using Cold-Setting Melamine-Based Adhesive
Yusup Amin, Renaldi Purnomo Adji, Muhammad Adly Rahandi Lubis, Naresworo Nugroho, Effendi Tri Bahtiar, Wahyu Dwianto, Lina Karlinasari
Polymers, 2023
Physical and Mechanical Properties of Oriented Flattened Bamboo Boards from Ater (Gigantochloa atter) and Betung (Dendrocalamus asper) Bamboos
Alfira Ramadhani Putri, Nur Alam, Ulfa Adzkia, Yusup Amin, I Wayan Darmawan, Lina Karlinasari
Jurnal Sylva Lestari, 2023
Effects of succinic acid impregnation on physical properties of sapwood and heartwood from plantation-grown short-rotation teak
Sarah Augustina, Teguh Darmawan, Sudarmanto, Narto Narto, Adik Bahanawan, Danang S Adi, Dimas Triwibowo, Yusup Amin, Imran A Sofianto, Prabu S Sejati, Wahyu Dwianto, Witjaksono, Ragil Widyorini, Philippe Gérardin, Sari Delviana Marbun
Southern Forests, 2023
Characteristics of Particleboard from Sorghum and Nypa Fruit Skin Fiber Bonded with Citric Acid-Sucrose Adhesive
Romauli Tampubolon, Evi Sribudiani, Sonia Somadona, Yusup Amin, Sukma Surya Kusumah
Jurnal Sylva Lestari, 2022
The Improvement of Sumatran Elephant (Elephas maximus sumatranus) Dung Particleboard Characteristics Using Bamboo Layering
Rudi Hartono, Apri Heri Iswanto, Evalina Herawati, Reski Eka Suramana, Jajang Sutiawan, Yusup Amin, Ihak Sumardi
Polymers, 2022
Characterization of Indonesian Banana Species as an Alternative Cellulose Fibers
Widya Fatriasari, Muhammad Rasyidur Ridho, Azizatul Karimah, Sudarmanto, Ismadi, Yusup Amin, Maya Ismayati, Muhammad Adly Rahandi Lubis, Nissa Nurfajrin Solihat, Fahriya Puspita Sari, Danang Sudarwoko Adi, Faizatul Falah, Apri Heri Iswanto, Fajarudin Ahmad, Nyoman J. Wistara, Ibrahim Purawiardi, Ahmad Fudholi
Journal of Natural Fibers, 2022
A comprehensive review on natural fibers: Technological and socio-economical aspects
Azizatul Karimah, Muhammad Rasyidur Ridho, Sasa Sofyan Munawar, Ismadi, Yusup Amin, Ratih Damayanti, Muhammad Adly Rahandi Lubis, Asri Peni Wulandari, Nurindah, Apri Heri Iswanto, Ahmad Fudholi, Mochamad Asrofi, Euis Saedah, Nasmi Herlina Sari, Bayu Rizky Pratama, Widya Fatriasari, Deded Sarip Nawawi, Sanjay Mavinkere Rangappa, Suchart Siengchin
Polymers, 2021
Surface characteristics and acoustical properties of bamboo particle board coated with polyurethane varnish
Lina Karlinasari, Ulfa Adzkia, Anugrah Sabdono Sudarsono, Pipiet Larasatie, Yusup Amin, Naresworo Nugroho
Forests, 2021
Radial variation of wood properties of eight years-old fast-growing teak (Tectona grandis - Platinum teak wood)
D S Adi, S K Himmi, Sudarmanto, Y Amin, T Darmawan, W Dwianto
Iop Conference Series Earth and Environmental Science, 2020
Anatomical properties and near infrared spectra characteristics of four shorea species from Indonesia
Danang Sudarwoko Adi, Sung-Wook Hwang, Dwi Ajias Pramasari, Yusup Amin, Hairi Cipta, Ratih Damayanti, Wahyu Dwianto, Junji Sugiyama
Hayati Journal of Biosciences, 2020
Spectral observation of agarwood by infrared spectroscopy: The differences of infected and normal aquilaria microcarpa
Danang Sudarwoko Adi, SUNG-WOOK HWANG, DWI AJIAS PRAMASARI, YUSUP AMIN, BERNADETA AYU WIDYANINGRUM, TEGUH DARMAWAN, ERIS SEPTIANA, WAHYU DWIANTO, JUNJI SUGIYAMA
Biodiversitas, 2020
Bending strength of lignocellulosic materials in softening condition
Wahyu Dwianto, Ratih Damayanti, Teguh Darmawan, Prabu Satria Sejati, Fazhar Akbar, Danang Sudarwoko Adi, Adik Bahanawan, Yusup Amin, Dimas Triwibowo
Indonesian Journal of Forestry Research, 2020
The movement of boron compound by infusion method and combination of injection and bandage-wrapping
Ratih DAMAYANTI, Evi SRIBUDIANI, Sonia SOMADONA, Djarwanto, Didi TARMADI, Yusup AMIN, Sulaeman YUSUF, Esti Rini SATITI, Wa Ode Muliastuty ARSYAD, Rudianda SULAEMAN, Syafrinal, Dwi Ajias PRAMASARI
Journal of the Korean Wood Science and Technology, 2020
Study on the existence and characteristics of Sonokeling (Dalbergia latifolia Roxb) as an Appendix II CITES Wood
W Dwianto, A Bahanawan, S S Kusumah, T Darmawan, Y Amin, D A Pramasari, E Lestari, F Akbar, Sudarmanto
Iop Conference Series Earth and Environmental Science, 2019
Biological activity of local plant extracts from Toba Region as insecticide
D Meisyara, N P R A Krishanti, A Zulfitri, A S Lestari, D Tarmadi, S K Himmi, Y Amin, D Zulfiana, A Fajar, S Yusuf, M Ismayati
Iop Conference Series Earth and Environmental Science, 2019
Anatomical observation and characterization on basic properties of Agarwood (Gaharu) as an Appendix II CITES
W Dwianto, S S Kusumah, T Darmawan, Y Amin, A Bahanawan, D A Pramasari, E Lestari, S K Himmi, E Hermiati, W Fatriasari, R P B Laksana, R Damayanti
Iop Conference Series Earth and Environmental Science, 2019
Moisture content, color quantification and starch content of oil palm trunk (Elaeis guineensis Jacq.)
A Bahanawan, S S Kusumah, T Darmawan, Ismadi, N Masruchin, Sudarmanto, Jayadi, D A Pramasari, D Triwibowo, W B Kusumaningrum, E S Wibowo, F A Syamani, N P R A Krishanti, E Lestari, Y Amin, S Sufiandi, A Syahrir, W Dwianto
Iop Conference Series Earth and Environmental Science, 2019

RECENT SCHOLAR PUBLICATIONS

THE SURFACE CHARACTERISTICS AND PHYSICAL PROPERTIES OF SENGON WOOD AT HIGH-TEMPERATURE HEATING TREATMENTS
TA Fariha, SD Marbun, A Bahanawan, PS Sejati, T Darmawan, ...
Indonesian Journal of Forestry Research 12 (1), 135-149 , 2025
2025
Evaluation on wood properties of 6 years-old platinum teak through near infrared spectroscopy
A Bahanawan, N Narto, S Sudarmanto, D Triwibowo, T Darmawan, ...
AIP Conference Proceedings 3172 (1), 020034 , 2025
2025
Comparison physical, mechanical and acoustical properties of Jabon and Betung bamboo
Y Amin, RP Adji, W Dwianto, N Nugroho, ET Bahtiar, L Karlinasari
AIP Conference Proceedings 3172 (1), 020038 , 2025
2025
IDENTIFIKASI KEBUTUHAN PELANGGAN DAN SPESIFIKASI PRODUK RANGKA SEPEDA KAYU TIPE SEPEDA GUNUNG
N Nurjannah, R Oktavina, BO Marpaung, RB Setiawan, DS Adi, Y Amin
JISI: Jurnal Integrasi Sistem Industri 12 (1), 117-130 , 2025
2025
In-situ modification of wood polymer via impregnation with ultra-low molar ratio urea-formaldehyde resins
S Augustina, W Dwianto, Narto, A Bahanawan, PS Sejati, Y Amin, ...
European Journal of Wood and Wood Products 83 (1), 39 , 2025
2025
Citations: 2
Pengembangan Cross Laminated Timber Hibrida dari Kayu Jabon dan Bambu sebagai Produk Komposit Struktural Unggul
Y Amin, L Karlinasari, N Nugroho, MAR Lubis
2025
IDENTIFICATION OF LIGNOCELLULOSE-LIKE MATERIAL USING SPECTROSCOPY ANALYSIS
DS Adi, W Fatriasari, D Triwibowo, T Darmawan, Y Amin, I Arra'd Sofianto, ...
Indonesian Journal of Forestry Research 11 (2), 299-306 , 2024
2024
Citations: 1
Surface roughness, dynamic wettability, and interphase of modified melamine formaldehyde-based adhesives on Jabon Wood
Y Amin, N Nugroho, ET Bahtiar, W Dwianto, MAR Lubis, U Adzkia, ...
Polymers 16 (8), 1084 , 2024
2024
Citations: 10
Deformation pattern of compressed wood cell walls in radial direction and its effect on modulus of rupture values in different loading directions
W Dwianto, T Darmawan, Sudarmanto, Narto, DS Adi, A Bahanawan, ...
AIP Conference Proceedings 2973 (1), 070005 , 2024
2024
Application of near-infrared (NIR) spectroscopy for predicting changes of water content and rind colour of red delicious Washington apple (Malus domestica) in room temperature …
DA Agustiningrum, IA Sofianto, R Damayanti, RG Rahmanto, R Pari, ...
AIP Conference Proceedings 2973 (1) , 2024
2024
Physical and anatomical properties of nine years-old platinum teak wood
T Darmawan, Narto, Sudarmanto, D Triwibowo, Y Amin, A Bahanawan, ...
AIP Conference Proceedings 2973 (1), 070014 , 2024
2024
Application of near-infrared spectroscopy for predicting the wood density of teakwood stands by increment cores and thin wood surface sampling
I Arra’d Sofianto, W Dwianto, Sudarmanto, Narto, DS Adi, D Triwibowo, ...
International Wood Products Journal 15 (1), 55-62 , 2024
2024
Citations: 1
A novel transparent hydrogel made of nanocellulose derived from oil palm residue: evaluation of its water retention and biodegradation properties
N Hastuti, L Agustini, Y Amin, DA Indrawan, L Efiyanti
Bulletin of Materials Science 46 (4), 214 , 2023
2023
Citations: 2
Effects of succinic acid impregnation on physical properties of sapwood and heartwood from plantation-grown short-rotation teak
S Augustina, T Darmawan, Sudarmanto, N Narto, A Bahanawan, DS Adi, ...
Southern Forests: a Journal of Forest Science 85 (3-4), 201-211 , 2023
2023
Citations: 4
Effect of glue spread on bonding strength, delamination, and wood failure of Jabon wood-based cross-laminated timber using cold-setting melamine-based adhesive
Y Amin, RP Adji, MAR Lubis, N Nugroho, ET Bahtiar, W Dwianto, ...
Polymers 15 (10), 2349 , 2023
2023
Citations: 22
Jurnal Sylva Lestari
AR Putri, N Alam, U Adzkia, Y Amin, IW Darmawan, L Karlinasari
Jurnal Sylva Lestari 11 (1), 1-21 , 2023
2023
Physical and mechanical properties of oriented flattened bamboo boards from Ater (Gigantochloa atter) and Betung (Dendrocalamus asper) bamboos
AR Putri, N Alam, U Adzkia, Y Amin, IW Darmawan, L Karlinasari
Jurnal Sylva Lestari 11 (1), 1-21 , 2023
2023
Citations: 6
Characterization of Indonesian banana species as an alternative cellulose fibers
W Fatriasari, MR Ridho, A Karimah, Sudarmanto, Ismadi, Y Amin, ...
Journal of Natural Fibers 19 (16), 14396-14413 , 2022
2022
Citations: 14
Characteristics of Particleboard from Sorghum and Nypa Fruit Skin Fiber Bonded with Citric Acid-Sucrose Adhesive
R Tampubolon, E Sribudiani, S Somadona, Y Amin, SS Kusumah
Jurnal Sylva Lestari 10 (3), 426-438 , 2022
2022
Citations: 11
The Improvement of Sumatran Elephant ( Elephas maximus sumatranus ) Dung Particleboard Characteristics Using Bamboo Layering
R Hartono, AH Iswanto, E Herawati, RE Suramana, J Sutiawan, Y Amin, ...
Polymers 14 (16), 3330 , 2022
2022
Citations: 8

MOST CITED SCHOLAR PUBLICATIONS

A comprehensive review on natural fibers: technological and socio-economical aspects
A Karimah, MR Ridho, SS Munawar, Ismadi, Y Amin, R Damayanti, ...
Polymers 13 (24), 4280 , 2021
2021.0
Citations: 164
Pengaruh suhu dan tekanan uap air terhadap fiksasi kayu kompresi dengan menggunakan close system compression temperature and steam pressure dependency on the fixation of …
Y Amin, W Dwianto
Jurnal Ilmu dan Teknologi Kayu Tropis 4 (2), 55-60 , 2006
2006.0
Citations: 23
Effect of glue spread on bonding strength, delamination, and wood failure of Jabon wood-based cross-laminated timber using cold-setting melamine-based adhesive
Y Amin, RP Adji, MAR Lubis, N Nugroho, ET Bahtiar, W Dwianto, ...
Polymers 15 (10), 2349 , 2023
2023.0
Citations: 22
Evaluation of the wood quality of platinum teak wood
DS Adi, S Sudarmanto, I Ismadi, M Gopar, T Darmawan, Y Amin, ...
Teknologi Indonesia 39 (1), 36-44 , 2016
2016.0
Citations: 21
Anatomical observation and characterization on basic properties of Agarwood (Gaharu) as an Appendix II CITES
W Dwianto, SS Kusumah, T Darmawan, Y Amin, A Bahanawan, ...
IOP Conference Series: Earth and Environmental Science 374 (1), 012062 , 2019
2019.0
Citations: 20
Surface characteristics and acoustical properties of bamboo particle board coated with polyurethane varnish
L Karlinasari, U Adzkia, AS Sudarsono, P Larasatie, Y Amin, N Nugroho
Forests 12 (9), 1285 , 2021
2021.0
Citations: 17
Characterization of Indonesian banana species as an alternative cellulose fibers
W Fatriasari, MR Ridho, A Karimah, Sudarmanto, Ismadi, Y Amin, ...
Journal of Natural Fibers 19 (16), 14396-14413 , 2022
2022.0
Citations: 14
Biological activity of local plant extracts from Toba Region as insecticide
D Meisyara, N Krishanti, A Zulfitri, AS Lestari, D Tarmadi, SK Himmi, ...
IOP Conference Series: Earth and Environmental Science 374 (1), 012006 , 2019
2019.0
Citations: 13
Study on the existence and characteristics of Sonokeling ( Dalbergia latifolia Roxb) as an Appendix II CITES Wood
W Dwianto, A Bahanawan, SS Kusumah, T Darmawan, Y Amin, ...
IOP conference series: earth and environmental science 374 (1), 012063 , 2019
2019.0
Citations: 12
Characteristics of Particleboard from Sorghum and Nypa Fruit Skin Fiber Bonded with Citric Acid-Sucrose Adhesive
R Tampubolon, E Sribudiani, S Somadona, Y Amin, SS Kusumah
Jurnal Sylva Lestari 10 (3), 426-438 , 2022
2022.0
Citations: 11
Anatomical properties and near infrared spectra characteristics of four shorea species from Indonesia
DS Adi, SW Hwang, DA Pramasari, Y Amin, H Cipta, R Damayanti, ...
HAYATI Journal of Biosciences 27 (3), 247-257 , 2020
2020.0
Citations: 11
Surface roughness, dynamic wettability, and interphase of modified melamine formaldehyde-based adhesives on Jabon Wood
Y Amin, N Nugroho, ET Bahtiar, W Dwianto, MAR Lubis, U Adzkia, ...
Polymers 16 (8), 1084 , 2024
2024.0
Citations: 10
Radial variation of wood properties of eight years-old fast-growing teak ( Tectona grandis - Platinum teak wood)
DS Adi, SK Himmi, Sudarmanto, Y Amin, T Darmawan, W Dwianto
IOP Conference Series: Earth and Environmental Science 591 (1), 012035 , 2020
2020.0
Citations: 9
Bending strength of lignocellulosic materials in softening condition
W Dwianto, R Damayanti, T Darmawan, PS Sejati, F Akbar, DS Adi, ...
Indonesian Journal of Forestry Research 7 (1), 59-70 , 2020
2020.0
Citations: 9
Effect of age on chemical component of platinum teak wood—a fast growing teak wood from LIPI
DA Pramasari, I Wahyuni, DS Adi, Y Amin, T Darmawan, W Dwianto
Proceedings of The 6th International Symposium of IWoRS, Medan, Indonesia … , 2014
2014.0
Citations: 9
The Improvement of Sumatran Elephant ( Elephas maximus sumatranus ) Dung Particleboard Characteristics Using Bamboo Layering
R Hartono, AH Iswanto, E Herawati, RE Suramana, J Sutiawan, Y Amin, ...
Polymers 14 (16), 3330 , 2022
2022.0
Citations: 8
Spectral observation of agarwood by infrared spectroscopy: The differences of infected and normal Aquilaria microcarpa
DS Adi, SW Hwang, DA Pramasari, Y Amin, BA Widyaningrum, ...
Biodiversitas 21 (21), 7 , 2020
2020.0
Citations: 8
Witjaksono. 2016. Evaluation of the Wood Quality of Platinum Teak Wood
DS Adi, I Sudarmanto, M Gopar, T Darmawan, Y Amin, W Dwianto
Teknologi Indonesia 39 (1), 36-44 , 0
Citations: 8
Moisture content, color quantification and starch content of oil palm trunk ( Elaeis guineensis Jacq.)
A Bahanawan, SS Kusumah, T Darmawan, Ismadi, N Masruchin, ...
IOP Conference Series: Earth and Environmental Science 374 (1), 012041 , 2019
2019.0
Citations: 7
Peningkatan rendemen gula pereduksi dari kayu jabon dengan pra perlakuan air kapur Ca (OH) 2
Y Amin, W Syafii, NJ Wistara, B Prasetya
J. Ilmu Teknol. Kayu Tropis 12 (2), 196-206 , 2014
2014.0
Citations: 7

Yusup Amin

RESEARCH INTERESTS

Scopus Publications

RECENT SCHOLAR PUBLICATIONS

MOST CITED SCHOLAR PUBLICATIONS