@ensit.tn
Mechanical Engineering - National Higher Engineering School of Tunis (ENSIT)
University of Tunis (UT) - Ministry of Higher Education - Tunisia
Microstructure evolution; Aging Material; Relationship microstructure-mechanical properties; Corrosion; Modeling; Nanocomposite; Additive manufacturing.
Scopus Publications
Scholar Citations
Scholar h-index
Scholar i10-index
Thabet A. M. Sghaier, Habib Sahlaoui, Tarek Mabrouki, Haifa Sallem, and Joël Rech
Springer Nature Switzerland
Thabet A. M. Sghaier, Habib Sahlaoui, Haifa Sallem, Tarek Mabrouki, and Joël Rech
Springer Nature Switzerland
Thabet A. M. Sghaier, Habib Sahlaoui, Tarek Mabrouki, Haifa Sallem, and Joël Rech
Springer Science and Business Media LLC
Habib Sahlaoui, Mohamed Guedri, and Habib Sidhom
Springer Science and Business Media LLC
Habib Sahlaoui and Habib Sidhom
Springer Science and Business Media LLC
Habib Sahlaoui, Kamel Makhlouf, and Habib Sidhom
Hindawi Limited
The effect of the glazed layer and firing conditions (temperature and duration) on the thermal shocks behavior of tableware porcelains has been studied. Two types of glazed layers and three firing conditions, used industrially in the commercial porcelains manufacture, are used in this investigation. Repeated thermal shock tests showed that the glazed layer with higher alumina/silica ratio is more resistant to thermal shocks and that the slow firing cycle, even at a relatively low temperature, is very beneficial for the thermal shock resistance of the porcelain matrix. Three-point bending tests showed that the crazing phenomenon, which affects the glazed layers as well as the porcelain matrix, does not affect significantly the mechanical resistance of these materials.
H. Sidhom, T. Amadou, H. Sahlaoui, and C. Braham
Springer Science and Business Media LLC
H Sahlaoui, K Makhlouf, H Sidhom, and J Philibert
Elsevier BV
H Sahlaoui, H Sidhom, and J Philibert
Elsevier BV